• Journal of the Korea Institute of Building Construction
• /
• v.16 no.3
• /
• pp.219-227
• /
• 2016

Chloride ions ingress continuously in reinforced concrete through pores of it by $Cl^-$. Finally, it causes a localized corrosion of the rebar and then it generates cracks on concrete structures. Recently, new materials removing harmful anions have been developed. Layered double hydroxides(LDHs) has an excellent ability to remove harmful anions because various anions can be adsorbed in the interlayer space between divalent and trivalent cations. Thus, LDHs has been applied in various fields. Especially, LDHs is expected to be effective adsorbent binding chloride ions. In this study, $Ca/Al-NO_3$ and $Mg/Al-NO_3$ LDHs were prepared by using a co-precipitation method. $Ca/Al-NO_3$ and $Mg/Al-NO_3$ LDHs were compared and analyzed by using XRD, SEM analysis. Many nano size hexagonal crystals were observed by SEM. Experiments for binding chloride ions of LDHs were conducted by using potentiometric method. The experimental data were measured every 15 minutes. It was observed that the chloride ion content is reduced by increasing of LDHs mass fraction and the reaction rate of $Mg/Al-NO_3$ is faster than $Ca/Al-NO_3$. In future studies, binding chloride capacity in cement materials will be evaluated based on results of this study.

• Journal of IKEEE
• /
• v.20 no.1
• /
• pp.61-67
• /
• 2016

In this paper, a hardware design method is proposed for high speed high precision neutron radiation measurements. Our system is fabricated to use a high performance A/D Converter for digital data conversion of high precision and high speed analog signals. Using a neutron sensor, incident neutron radiation particles are detected; a precision microcurrent measurement module is also included: this module allows for more precise and rapid neutron radiation measurement design. The high speed high precision neutron measurement hardware system is composed of the neutron sensor, variable high voltage generator, microcurrent precision measurement component, embedded system, and display screen. The neutron sensor detects neutron radiation using high density polyethylene. The variable high voltage generator functions as a 0 ~ 2KV variable high voltage generator that is robust against heat and noise; this generator allows the neutron sensor to perform normally. The microcurrent precision measurement component employs a high performance A/D Converter to precisely and swiftly measure the high precision high speed microcurrent signal from the neutron sensor and to convert this analog signal into a digital one. The embedded system component performs multiple functions including neutron radiation measurement for high speed high precision neutron measurements, variable high voltage generator control, wired and wireless communications control, and data recording. Experiments using the proposed high speed high precision neutron measurement hardware shows that the hardware exhibits superior performance compared to that of conventional equipment with regard to measurement uncertainty, neutron measurement rate, accuracy, and neutron measurement range.

• Resources Recycling
• /
• v.20 no.5
• /
• pp.64-68
• /
• 2011

The typical properties of manganese nodules are its high porosity and high specific surface area and manganese in nodules is existed as ${\delta}$-MnO$_2$. These properties suggest that manganese nodules ran be used as an adsorbent for heavy metal ions. This study investigated the practical applicability for the removal of copper ions in the waste water by manganese nodules as an adsorbent using fixed column and fix bed systems. Manganese nodules of 1kg (size 1-3 cm) can absorb 4.0g Cu in fixed column system and 2.3g Cu in fixed bed system from waste water for 3 hours respectively.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.511-511
• /
• 2017

하천에서 홍수 예방 및 가뭄재해 방지를 목적으로 최근 4대강 살리기 사업이 수행되었다. 특히, 안정적인 용수공급 및 다양한 수재해 피해를 최소화하기위해 다기능보가 설치되었다. 설치된 보는 고정보와 가동보로 구분되며 평상시에는 고정보를 넘어가는 월류흐름이 발생하며 홍수 시에는 추가적으로 가동보를 개방하여 오리피스 흐름이 발생한다. 최근 기후변화로 인해 집중호우가 빈번히 발생하며 이는 보 주변에서 빠르고 복잡한 흐름을 유발하게 된다. 이러한 흐름특성은 보하류의 세굴문제뿐만 아니라 물받이와 바닥보호공의 안전성에 영향을 미칠 수 있다. 본 연구에서는 영상기법을 활용하여 도수가 발생하는 조건에서 고정보 하류의 물받이공 및 바닥보호공에 난류흐름특성 및 압력분포를 분석하였다. 길이 8.0 m, 폭 0.3 m를 갖는 개수로에서 실험을 수행하였으며 0.2 m 높이의 고정보는 상류경계로부터 3.0 m지점에 위치하였다. 보 하류부에서 유속성분은 비접촉식 유속측정 기법인 입자영상유속계(Particle Image velocimetry, PIV)와 기포흐름을 측정할 수 있는 기포영상유속계(Bubble Image velocimetry, BIV)를 적용하였다. 그러므로 기포 존재유무와 관계없이 보 하류부 구간에 대한 유속장 성분을 취득하였다. 도수흐름은 물받이공 및 바닥보호공 영역의 바닥면을 따라 빠른 유속을 갖는 제트류가 발생하고 수면과 바닥으로 강한 진동이 발생하여 불안정한 흐름이 야기된다. 바닥면에 작용하는 압력을 측정하기 위해 흐름방향을 따라 피에조미터를 설치하였고 압력수두 분포를 초고속카메라로 촬영하여 그 특성을 분석하였다. 실험을 결과를 통해 보 하류부에 영향을 미치는 인자를 도출하였으며 향후 보 설계기준에 반영할 수 있을 것으로 기대된다.

• Korean Chemical Engineering Research
• /
• v.49 no.3
• /
• pp.372-380
• /
• 2011

Char gasification is affected by operating conditions such as reaction temperature, reactants gas partial pressure, total system pressure and particle size in addition to chemical composition and physical structure of char. The aim of the present work was to characterize the effect of coal particle size on $CO_{2}$ gasification of chars prepared from two different types of bituminous coals at different reaction temperatures(1,000-$1,400{^{\circ}C}$). Lab scale experiments were carried out at atmospheric pressure in a fixed reactor where heat was supplied into a sample of char particles. When a flow of $CO_{2}$(40 vol%) was delivered into the reactor, the char reacted with $CO_{2}$ and was transformed into CO. Carbon conversion of the char was measured using a real time gas analyzer having NDIR CO/$CO_{2}$ sensor. The results showed that the gasification reactivity increased as the particle size decreased for a given temperature. The sensitivity of the reactivity to particle size became higher as the temperature increases. The size effects became remarkably prominent at higher temperatures and became a little prominent for lower reactivity coal. The particle size and coal type also affected reaction models. The shrinking core model described better for lower reactivity coal, whereas the volume reaction model described better for higher reactivity coal.

• Particle and aerosol research
• /
• v.9 no.4
• /
• pp.201-208
• /
• 2013

Copper (II) and Nickel (II) mimic complexes of enzyme carbonic anhydrase were evaluated under ambient condition for carbon dioxide capture and conversion process. The synthesized complexes were characterized by ATR-FTIR and UV-DR spectroscopy. It was found that all the complexes have biomimetic activity towards $CO_2$ using para-nitrophenyl acetate (p-NPA) hydrolysis as the model reaction. Interestingly, the proper geometry obtained by the restricted orientation of tripodal N atoms in Cu (II) complex of 2,6-bis(2-benzimidazolyl) pyridine showed the highest activity (1.14 au) compared to others. The $CO_2$ bio-mineralization to $CaCO_3$ was carried out via in-vitro crystallization approach. Results indicate that the biomimetic complexes have a role in determining $CaCO_3$ morphology. The present observations establish a qualitative insight for the design of improved small-molecule catalysts for carbon capture.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.102-102
• /
• 2011

레이온 섬유는 dry한 촉감, 고광택, 드레이프성 등 의류 분야에서 요구하는 많은 장점들을 가지고 있으나 타 섬유 소재에 비해 소비량이 적은 것은 합섬이나 면/울 제품에 비해 상대적으로 제품 가격이 높고, 형태안정성이 취약하여 정장 및 캐주얼의 겉감 용도로 쓰기에는 성능 보완이 필요하다. 또한 염색가공 공정에서 구김발생이 많으며, 열고정이 쉽게 이루어지지 않아 습윤강도와 탄성 회복률이 낮아 변형이 쉽게 발생된다. 이에 본 연구에서는 합섬의 장점을 그대로 유지하면서 레이온 섬유가 갖는 고비중과 우수한 드레이프성과 유연한 질감으로 소프트 터치를 발현하는 특수한 레이온 대체 소재를 실현하고자 하였다. 직물에서 드레이프성과 은은한 광택을 확보하기 위해서는 폴리머단계에서 비중과 광택을 발현할 수 있는 무기입자 중 비중이 높고, 중합 후 폴리머 내에서 광택을 유지하는 입자의 선택이 필요한데 본 실험에서는 $BaSO_4$를 이용하여 PET dope액과 중합한 후 용융 방사하여 고비중 폴리에스테르사(100/48)를 제조하였다. 고비중 폴리에스테르사를 이용하여 폭 58inch, 밀도 92T, 중량 324.8g/yd 직물로 제직하여 그에 따른 태를 측정하였다. 태측정기(KES-FB, KATO TECH CO)를 이용하여 인장 & 전단강도, 굽힘강도, 압축강도, 표면측정 시험 결과 $BaSO_4$ 2% 첨가한 원단의 드레이프성이 우수한 것을 확인할 수 있었다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.34-34
• /
• 2003

산업의 발달로 인하여 자원재활용의 문제와 환경 오염 방지와 더불어 에너지 절약에 대한 중요성이 확대되면서 분리 고정을 이용한 환경 오염 방지 및 에너지 절약에 대한 관심이 확대되었다. 세라믹 필터는 열악한 환경에서의 적용 그리고 에너지 소모가 적은 장점을 가지고 있다. 여러종류의 재료들 중에서 기공의 제어가 용이한 알루미나 여과막은 보에하미트(${\gamma}$-AlOOH) 분말과 금속 알콕사이드(ATSB, aluminum tri-sec butoxide)를 사용하여 간단하게 제조할 수 있다. 알루미나는 열처리 론도에 따라 $\alpha$-A1$_2$O$_3$ 결정상 뿐만 아니라 몇 가지 준안정한 결정구조를 가진다. 보에마이트(${\gamma}$-AlOOH)는 45$0^{\circ}C$ 근처에서 미세한 기공을 가진 ${\gamma}$-A1$_2$O$_3$로 상전이 되는 것으로 알려져 있고, 120$0^{\circ}C$보다 낮은 온도에서 열처리하게 되면 미세구조의 변화는 일어나지 않고 약간의 입자 성장만을 수반하는 $\delta$-A1$_2$O$_3$ 또는 $\theta$-A1$_2$O$_3$으로 상전이가 일어난다. $\alpha$-A1$_2$O$_3$로의 상전이는 기공 크기의 변화와 vermicular구조를 가지는 비정상적인 입자성장을 수반하게 된다. 여과막은 기공크기와 분포를 제어하는 것이 매우 중요하므로, 상전이와 미세구조의 변화를 이해하는 것은 중요하다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.5
• /
• pp.962-978
• /
• 1989

A new model of the combustion rates of soot particle in turbulent flames has been suggested. This model applies the combustion rate of soot particles in laminar flames and uses local time-averaged quantities in order to consider the effect of the chemical reaction on the soot combustion in turbulent flames. The proposed rate equation has been tested for two propane-air turbulent round-jet diffusion flames and gives better predictions for the soot concentration field of two flames than the model previously used, especially in low temperature regions. A modified Monte carlo Method for analyzing radiative heat transfer of a flame also has been suggested and tested, which reveals good results.

• Applied Chemistry for Engineering
• /
• v.8 no.4
• /
• pp.602-609
• /
• 1997

The seed formation and growth of $\alpha$-ferric oxyhydroxide with aerial oxidative precipitation from aqueous solution of ferrous sulfate with KOH, NaOH, $Na_2CO_3$ and $K_2CO_3$ as precipitants have been studied by free pH drift experiment. It has been shown that all precipitants give same particle formation and growth path, and average particle length from KOH and NaOH as precipitants was about 1.5 times shorter than that of $K_2CO_3$ and $Na_2CO_3$. When initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$ of KOH was decreased the particle was grown oxyhydroxide seed growth from aqueous solution of ferrous sulfate with KOH has been studied. The influence of the air flow rate, reaction temperature and initial mole ratio, $R_o=[Fe^{2+}]_o/[OH^-]_o$, on the kinetics of seed growth are investigated by static pH experiment. The oxidation rate of seed growth increased with increase in the air low rate, reaction temperature and initial mole patio. The activation energy of seed growth is 16.16 KJ/mol and the rate equation of seed growth can be written as follows: $-\frac{d[Fe^{2+}]}{dt}=1.46{\times}10^4[P_{o2}]^{0.66}[OH^-]^{2.19}exp(-\frac{16.16}{dt})$.