• Proceedings of the Optical Society of Korea Conference
• /
• 2001.08a
• /
• pp.120-121
• /
• 2001

• Journal of the Institute of Electronics and Information Engineers
• /
• v.53 no.4
• /
• pp.97-105
• /
• 2016

Radiography image detector produces digital images by collecting the charges from the incident x-ray photons and converting it to the voltage signals and then the digital signals. The fixed-pattern noise from the nonuinform amplifier gains in the employed multiple readout circuits. In order to correct the nonuniform gains, a gain-correction technique which is based on the gain map is conventionally used. Since the photon noise remains in the designed gain map, the noise contaminates the gain-corrected images. In this paper, experimental observations are conducted for filtering the remained noise in the gain map, and a filter optimization algorithm is proposed to efficiently remove the noise. For acquired x-ray images from detectors, the filtered gain maps are evaluated and it is shown that optimization algorithm can improve the filtering performance even for relatively strong fixed-pattern noises, which cannot be removed by a simple filter.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.1
• /
• pp.69-77
• /
• 1993

Adaptive Control is applied to regulate cutting force in turning operation under varying cutting conditions. Regulation is achieved primarily by adjusting feedrate. Such control leads to better machine utilization and increased tool life. The modeling of adaptive control system in turning operation is presented. The experimental results show that the adaptive PI controller is stable and performs more effective force control over wide range of cutting conditions as compared with the fixed gain PI controller.

• Korean Journal of Optics and Photonics
• /
• v.8 no.3
• /
• pp.236-240
• /
• 1997

We compare feedback wavelength-dependent performances of all-optical gain-clamped 980-nm pumped erbium-doped fiber amplifiers. In a 2.5-Gbps 8-channel WDM system, we have measured and compared gain compressions, signal power variations due to cross-saturation, power penalties caused by relaxation oscillations and noise figures for three different feedback wavelengths - 1532, 1543, and 1565 nm.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.7
• /
• pp.12-21
• /
• 1998

본 논문은 음성 부호화기인 MPMLQ(Multi Pulse Maximum Likehood Quantization)를 고정 소숫점 범용 DSP에 실시간으로 구현할 때 발생되는 계산량을 줄이기 위한 변형된 형태의 MPMLQdp 관한 것이다. MPMLQ는 음성 신호에서 선형 예측 계수와 피치 정보를 추출하고 남은 잔여 신호와 가장 유사한 여기 신호를 표현할 때 상관법을 이용 한다. 상관법은 DSP상에 구현할 때 계수 승산 오버플로우를 발생시킬 수 있으므로 연산후 항상 점검하여야 한다. 이것은 MPMLQ 구현시 전체 계산량의 많은 부분을 차지한다. 본 논 문은 이러한 문제점에 착안하여 계수 승산 오버플로우가 발생하지 않도록 입력 음성신호의 크기를 2비트 만큼 줄이고, 이로 인하여 같은 크기로 줄어든 잔여 신호를 고려하여 MPMLQ에서 여기신호의 크기를 표현하는 고정 코드북 이득표를 적절히 조절하였다. 실험 결과 변형된 MPMLQ의 SSNR은 0.040325dB(실험data기준) 향상되었으며, 계산량에 있어서 도 17.7%의 처리속도 향상되었다. 따라서 고정 소숫점 범용 DSP에 실시간 구현이 가능하였다.

• Proceedings of the KIPE Conference
• /
• 2017.11a
• /
• pp.177-178
• /
• 2017

본 논문에서는 벅-타입 능동 전력 디커플링 회로의 단순화된 제어 방법을 위한 가변 스텝을 적용한 최적 보상 이득 알고리즘을 제안한다. 고정 스텝을 사용한 기존의 최적 보상 이득 알고리즘보다 유동적인 보상 이득 변화를 통해 DC링크 전압 리플을 효과적으로 줄일 수 있다. 기존의 방법보다 최적 보상 이득을 추적하는 시간이 줄어들어 갑작스런 부하 변동이나 이상 상황에 빠른 대응이 가능하다. 벅-타입 능동 전력 디커플링 회로는 전류 불연속 모드로 동작하며, 전류 지령치는 DC링크 전류의 1차 리플 성분에 전류 이득을 유동적으로 보상하여 생성하기 때문에 모든 구간에서 효과적으로 DC링크의 전압 리플을 줄일 수 있고 빠른 대응이 가능하다. 제안하는 가변 스텝을 적용한 최적 보상 알고리즘의 효과는 MATLAB-Simulink 시뮬레이션을 통해 검증하였다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2000.08a
• /
• pp.144-145
• /
• 2000

파장 분할 다중화(WDM)기술은 빠른 속도로 발전해 왔으며, 이에 대한 연구는 계속되고 있다. 전송용량의 증가에 의해 전송 채널의 수가 증가하고 이에 따라 이득 대역도 더 넓어져야한다.$^{(1)}$ 파장 분할 다중화(WDM) 시스템의 구성에서 어븀 첨가 광섬유 증폭기(EDFA)는 시스템의 핵심 요소로 각 단계마다 몇 개씩의 EDFA가 사용된다. EDFA에서는 이득의 변화가 10 ms정도로 천천히 일어나므로 입력의 평균값에 의해 이득이 결정된다. 따라서, EDFA는 모든 채널의 입력의 합이 일정할 때 이득의 상호 포화로 인한 채널 간의 누화가 없다는 장점이 있기 때문에 다채널 WDM 시스템의 광섬유 증폭기로 매우 유용하게 이용되고 있다.$^{(2)}$ (중략)

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.6
• /
• pp.602-611
• /
• 2004

Servo system has commonly adapted PI controller with fixed gains, because of its simplicity and determinative relationship among the parameters. The fixed gains PI system may be applied well to some operation conditions, but not non-linearities, complex and time variant operation conditions. For solving these problems, another conventional method, 'variable gun schedule according to speed', is published. The value of gain is determined according to the absolute value of the mover real speed. In this paper, FSTPIC(Fuzzy Self-Tuning PI Controller) is proposed based on various experiences to rapidly reduce speed error and to secure a good speed response characteristics. The effectiveness of proposed algorithms is demonstrated by comparing to two conventional gain systems via 4-quadrant operation.

• Korean Journal of Optics and Photonics
• /
• v.8 no.1
• /
• pp.58-62
• /
• 1997

A new, simple lasing loop configuration employing a fiber grating was proposed and demonstrated for all-optical gain control of erbium-doped fiber amplifier. The lasing loop was designed such that the fiber grating acts as a notch filter to cutoff the lasing light as well as selects the lasing wavelength. The operating gain was clamped to the same level as the loop loss and it could be varied with a tunable directional coupler in the loop. It is believed that this type of gain-controlled erbiumdoped fiber amplifier can have several advantages when used in wavelength-division-multiplexed transmission systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6A
• /
• pp.547-555
• /
• 2006

We implemented DPU(Double-Pass Gain-Clamped) L-band EDFA for highly efficient amplification. A lasing signal generated within the linear cavity, can minimize the fluctuation of surviving channels when several WDM(Wavelength Division Multiplexing) channels are added or dropped. The new method measuring the characteristics of transient response of surviving channels quantitatively is suggested. It is to measure the ratio of lasing output before add or drop to that after add or drop. We investigated dynamic characteristics by using this method according to lasing wavelengths and propagation directions within the cavity. Experimental measurements show that the short lasing wavelength and backward propagation direction is the best condition for small fluctuation of surviving channels.