• Clinical and Experimental Reproductive Medicine
• /
• v.19 no.2
• /
• pp.169-174
• /
• 1992

Previous studies have indicated that immunological factor is responsible for the infertility. We have detected sperm antibodies in ZIFT patients which grouped as fertilization failure (A; n=18) and low fertilization rate (${\leq}50%$)(B; n=20). Patients, however, had normal oocytes and sperms. We collected serum from wives and semen from husbands and donors (fertile sperm), if it was needed. We examined class, binding patterns and amounts of antisperm antibodies(ASA) by direct and indirect immunobead binding assay. In group A, 11 husbands were ASA positive showing 62.2% and 61.1% binding with IgA and IgG, respectively, and two wives were ASA positive showing 70.0% and 71.0% binding with IgA and IgG, respectively. Binding sites were mainly at the head of sperms (84%). In group B, 8 husbands were ASA positive showing 37.5% and 40.0% binding with IgA and IgG, respectively, and two wives were ASA positive showing 41.3% and 42.0% binding with IgA and IgG, respectively. Binding sites were also mainly at the head of sperms (78%). For the treatment of ZIFT patients who had fertilization failure at the first trial, we used albumin fractionation method and dilution method with 30% fetal cord serum (FCS) to reduce the titer of ASA. We used partial zona dissection (P.Z.D.) method for wives who have antisperm antibodies in their serum. According to represented method, we could inhance the fertilization rate to 60.0% by albumin fractionation and 20.0% by P.Z.D., respectively. We concluded that the use of micromanipulation like P.Z.D. or the other sperm processing methods is required to increase a chance of fertilization. This result suggested that it should be a prerequisite to test antisperm antibodies prior to entering assisted reproductive technologies (ART) programs.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.4
• /
• pp.3-11
• /
• 2015

Apartment developers consider the initial sales rate as an important indicator for their success of apartment development projects. They tried to achieve a secure level of initial sales rate. In spite of its importance, there is little research on the initial sales rate because of the difficulties in gathering proper data for analysis. This study, however, collects the data in initial sales rates in Su-won from various sources such as construction companies, marketing companies, sales companies and so on. By using this rare data, this study analyses the initial contract rate of apartment and estimates the initial contract rate by sales price. The result of this study shows that important of land area ratio, brand, and distance to park. It is expected that the proposed model will be used for apartment developers in sales planning phase.

• Clinics in Shoulder and Elbow
• /
• v.11 no.2
• /
• pp.137-142
• /
• 2008

Purpose: To evaluate the clinical and radiographic results of the treatment of a proximal humerus fracture with a locking compression plate(LCP). Materials and Methods: This study reviewed the results of 24 cases of a proximal humerus fracture treated with a LCP from January 2005 to April 2007, after a follow up of more than 12 months. There were 8 males and 16 females with a mean age of 68.9(33-90) years. The clinical results were evaluated using the Neer's evaluation criteria, and the radiographic results were evaluated using the bone union time and Paavoleinen method. Results: The mean time for bone union was 11.9 weeks. Using the Neer's functional evaluation, 21 cases of the 24 patients (87%) showed excellent or satisfactory results. Twenty two cases (91%) showed good results according to the Paavoleinen method. The complications encountered were metal failure (1 patient), AVN of the humeral head (1 patient) and joint stiffness (1 patient). Conclusion: The LCP demonstrated good results in the treatment of a proximal humerus fracture and has relatively fewer complications than other internal fixators.

• Journal of Chest Surgery
• /
• v.33 no.11
• /
• pp.886-893
• /
• 2000

배경: 흉복부 대동맥류는 질환 자체가 광범위하고 수술 중 척수를 포함한 각종 장기의 보호 및 허혈 방지라는 면에서 아직도 수술 합병증이 높은 질환이다. 본 연구에서는 그 동안의 임상경험을 바탕으로 치료성적, 합병증 발생, 사망률 등을 검토하였다. 대상 및 방법: 1990년 1월부터 1999년 12월까지 흉복부동맥류로 수술을 시행한 38명의 환자를 대상으로 의무 기록 검토을 통한 후향적 분석을 시행하였다. 결과: 남자가 22명, 여자가 16명, 평륜 연령은 46.2$\pm$12.3세였고, 크로포드 진단분류 상 1형 이 13례(34.2%), 2형이 19례(50%), 3형이 4례(11%), 4형이 2례(4.8%)였다. 만성 대동맥박리증에 관련된 경우가 29례(76.3%)로 가장 많았고, Marfan 증후군이 동반된 경우가 9례(23.7%)에서 있었다. 원위부 대동맥 관류를 35례에서 시행하였으며, 고동맥-고정맥 심폐바이패스를 31례에서, 좌심방-고동맥 바이패스를 4례에서 시행하였다. 심폐바이패스를 이용한 31례중 4례에서 초저체온하 완전순환정지를 이용하였다. 대동맥 차단 중 복강내 주요 대동맥 분지로의 선택적 관류를 시행하였다. 대동맥류의 최대직경은 평균 8.2$\pm$2.4cm이었고, 동맥류가 파열된 경우는 11례(28.9%)에서 있었다. 전례에서 인조혈관을 이용한 대동맥의 치환술을 시행하였다. 단계적으로 흉복부 대동맥을 겸자하면서 인공혈관을 문합하였고, Adamkiewicz 동맥으로 생각되는 부위의 늑간 동맥을 문합해주었는데, 8번째부터 12번째 흉추 사이의 늑간 동맥 중 역류혈류가 나타나고 상대적으로 내경이 큰 것들을 문합해 주었다. 술 후 조기사망은 3례에서 있었으며, 사인은 심폐기 이탈 실패 (2례), 저혈압 및 산증(1례) 등이었다. 조기 합병증으로는 애성 5례, 출혈 5례, 창상간염 3례, 장기간의 인공호흡기보조가 3례 등이 있었다. 치명적인 조기 합병증인 하지마비는 2례(5.3%)에서 발생하였고, 이 중 1례는 대동맥의 심한 석회화로 늑간동맥을 문합해 주지 못했던 경우였다. 35명의 환자에서 평균 추적기간은 103.1$\pm$6.1 개월, 2년 생존율은 93.8%, 5년 생존율은 86.1%, 8년 생존율은 80.7%였다. 추척기간 동안 4례의 만기사망이 관찰되었고, 사인은 2례에서는 갑작스런 의식소실이 발생하여 규명하기 어려웠으며, 대동맥-식도루 발생에 의한 경우가 1례, 경동맥류 파열에 의한 경우가 1례 등이었다. 만기 합병증으로는 복부 대동맥류(2례), 상행 대동맥 및 대동맥 근부 확장(1례), 대동맥-늑막루(1례), 창상 부위 탈장(1례), 역행성 사정(1례) 등이 있었다. 결론: 저자들은 흉복부대동맥류의 수술에 있어 심폐우 회술 혹은 좌심방-고동맥 바이패스를 통한 원위부 관류 및 저체온법, 수술 시 척수의 혈류공급과 관련된 늑간동맥의 연결 등으로 주요 신경합병증의 발생을 줄이고 좋은 성적을 거두고 있다고 판단하였으며 향후 임상 경험 축적과 함께 보다 정련된 위험인자의 분석이 필요하다고 본다.

• Journal of Biomedical Engineering Research
• /
• v.19 no.5
• /
• pp.503-511
• /
• 1998

In this study, the stress distribution for different tibial components was observed In order to Investigate the load transfer and potential failure mechanism of the tibial components subjected to dynamic impact loading and also to evacuate the effect of bone-implant bonding conditions on the implant system. The 3-dimensional finite element models included an intact tibia, cemented metal-backed tibial component, uncemented metal-blocked tibial component, cemented all-polyethylene tibial component, and metal-backed component with a debonded bone/stem interface. The results showed that the cemented metal-hocked component Induced slightly higher peak stress at stem tip than the uncemented component. The peak stress of the all-polyethylene tibia1 component at stem trip showed about half thats of metal-backed tibial components. The all-polyethylene component showed a similar dynamic response to intact tibia. In case of debonded bone/stem interface, the peak stress below the metal tray was three times Higher than that of the fully bonded interface and unstable stress distribution at the stem tip was observed with time, which causes another adverse bone apposition and implant loosening. Thus, the all-polyethylene tibial component bonded fully to the surrounding bone might be most desirable system under an impact loading.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.23 no.3
• /
• pp.263-269
• /
• 2001

Median cleft of the lower lip and/or mandible is a rare congenital anomaly, first mentioned by Couronne in 1819. Monroe(1966), Fujino(1970), Ranta(1984) and Oostrom(1996) conducted comprehensive reviews and list cases in literature. Median cleft varies greatly, from a simple vermilion notch to a complete cleft of the lip involving the tongue, the chin, the mandible, the supporting structures of the median of the neck, and the manubrium sterni. The associated anomalies include ankyloglossia, cleft tongue, neck contraction, heart lesion, absence of hyoid bone, and so on. The etiology of median cleft is unknown. Various possibilities, such as failure of mesodermal penetration into the midline, failure of fusion of mandibular processes, external factors apart from the embryogenic pattern such as pressure, position in utero, circulatory failure caused placental adhesion, diseases in pregnancy, and so on, have been discussed. A 8-year-old girl was referred to the Dept. of Oral & Maxillofacial Surgery, Kyungpook National University Hospital and had been aware of the fact that at birth "she had something wrong with her mouth." Shortly after birth she had been examined by a plastic surgeon and at that time surgical procedure had been performed to release the tongue from the lower jaw and lip at local hospital. On admission, she had a slight notching of lower lip and two fibrous frenum ran from the lip along the ventral surface of the tongue, diastema between her mandibular central incisors, and slightly constricted bifid mandible associated independent movement of the two halves of mandible. The patient had autogenous iliac bone graft to reconstruct the mandibular midline defect. The postoperative result was uneventful. In future, the correction of the soft tissue deformities such as notching of the lower lip and partial ankyloglossia will be required for the esthetic and functional improvement.

• The korean journal of orthodontics
• /
• v.37 no.2 s.121
• /
• pp.89-97
• /
• 2007

Objective: The purpose of this study was to measure the insertion torque of orthodontic miniscrews regarding changes in their shape, diameter, and length. Methods: Torque values were measured during continuous insertion of the miniscrews into solid rigid polyurethane foam, using a torque tester of driving motor type with a regular speed of 3 rpm. Orthodontic miniscrews (Biomaterials Korea, Seoul, Korea) of cylindrical type and taper type were used. Results: Increasing the length and diameter of the miniscrews increased the maximum insertion torque value in both cylindrical and taper type screws. Insertion torque was increased at the incomplete head of the cylindrical type screw, and at the tapered part of the taper type screw. The insertion torque value of miniscrews was influenced most by diameter, then shape and length. As a result, it was shown that the diameter of the screw had the most influence on insertion torque, and the taper type screw had a higher torque value than the cylindrical type screw. Conclusion: Therefore, a large diameter or taper type screw are adequate for areas of thin cortical bone with a large interdental space, and a small diameter or cylindrical type screw are adequate in the mandibular molar area or the midpalatal area having thick cortical bone.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.1
• /
• pp.47-57
• /
• 2010

An undisturbed healing process without micromotion at the implant-bone interface is essential for achievement of osseointegration of dental implant. Therefore, initial stability was advocated as prerequisite for successful clinical outcome. Adequate bone quality and quantity were important to achieve initial stability and to prevent early failures. However there were few published data available regarding the effect of design change in implant geometry on initial stability of the implants. The purpose of the current study was to assess the initial stability of various designs of implants when placed into artificial bone materials of varying qualities and shapes of insertion holes. Within the scope of this study, the following results were drawn. Bone quality was major importance to achieve initial stability. Initial stability was higher on GS II which had additional design feature of double thread. With a tapered design of implant such as GS III showed a higher initial stability than straight one. An insertion hole with the similar shape of implant would lead to reduce a compression force on cortical bone and enhance a bone anchorage on cancellous bone.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.43 no.2
• /
• pp.200-206
• /
• 2016

Root fracture is defined as a fracture involving the dentin, cementum, and pulp. Most fractures occur in the maxillary anterior teeth between the ages of 11 and 20 years old. The treatment for root fracture in permanent teeth involves the reduction and fixation of the displaced coronal segment. When signs of pulp necrosis or inflammatory root resorption are present, root canal therapy should be performed. Since most apical fragments maintain pulp vitality, root canal therapy is typically limited to coronal fragments. However, it's too difficult to achieve a proper apical stop on coronal fragment. Intentional replantation involves performing root apex treatment outside the mouth after intentional extraction of the tooth in a controlled environment and then replanting it. The objective is 'perfect' root canal therapy. Intentional replantation may be used in cases of failed typical root canal therapy, problematic endodontic retreatment due to the existing restoration or a calcified root canal, and when apical surgery is contraindicated because of a lack of reasonable approaches. In this case, intentional replantation was carried out to treat a horizontal root fracture in a maxillary central incisor with a calcified root canal due to previous trauma. We achieved a clinically and functionally satisfactory result.

• The Journal of the Korean dental association
• /
• v.53 no.9
• /
• pp.644-655
• /
• 2015

Purpose: This study was conducted to evaluate the effect of the fixture abutment connection type and diameter on the screw joint stability in external butt joint for 2nd surgery and internal cone connected type implant system for 1st and 2nd surgery using ultimate fracture strength. Materials and Methods: USII system, SSII system and GSII system of Osstem Implant were used. Each system used the fixture with two different diameters and cement-retained abutments, and tungsten carbide / carbon coated abutment screws were used. Disc shaped stainless steel metal tube was attached using resin-based temporary cement. The experimental group was divided into seven subgroups, including the platform switching shaped specimen that uses a regular abutment in the fixture with a wide diameter in USII system. A static load was increased to the metal tube at 5mm deviated point from the implant central axis until it reached the compression bending strength at a rate of 1mm/min. Then the deformations and patterns of fracture in threaded connection were compared. Results and Conclusion: 1. In the comparison between the Regular diameter, compression bending strength of SSII system was higher than USII system and GSII system. There was no significant difference between USII system and GSII system. 2. In the comparison between wide diameter, compression bending strength was increased in the order of GSII system, USII system, and SSII system. 3. In comparison between the implant diameter, compression bending strength of the wide diameter was greater than the regular diameter in any system(P<0.05). 4. There was no significant difference between the platform switching (III group) and the regular diameter (I group) in USII system. 5. In USII system, fracture of abutment screw and deformation of both fixture and abutment were observed in I, II and III subgroups. 6. Failure pattern of SSII system, which was the fracture of abutment screw and deformation of the abutment and fixture, was observed in both IV and V subgroups. Fracture of some fixtures was observed in subgroup V. 7. Failure pattern of GSII system, which was the fracture of the abutment screw and deformation of the fixture and the abutment, was observed in both VI and VII subgroups. Apart from other subgroups, subgroup VII demonstrated no bending neither the fracture at the top of the fixture. The compressive deformation of internal slope in the fixture was the only thing observed in subgroup VII.