• Title/Summary/Keyword: 고정법

Search Result 1,914, Processing Time 0.025 seconds

마이크로파에 의한 생체물질 고정효과

  • 손태호
    • The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
    • /
    • v.5 no.3
    • /
    • pp.78-87
    • /
    • 1994
  • 생물학 및 의학등의 생명과학에서는 현미경을 이용하여 생체물질 즉, 생체조직을 관찰하고 이에 대한 조직의 검사 결과를 판정하고 발표한다. 이때 필히 고정과정(fixation process)을 거쳐야 한 다. 즉, 생체조직중 조직의 구조, 특정 세포나 바이러스 및 효소등을 관찰할 때 고정과정을 거쳐 조직을 절편하고 이를 염색하여 현미경으로 검사하게 된다. 고정과정이란 생체물질을 안정화시키고 자기분해 혹은 부패를 방지하여 보존이 가능하도록 변화시키 는 과정으로, 조직내의 용해성 물질을 불용성 물질로 변형시키는 과정이다. 고정과정을 거친 생체조직 은 구조를 보존하고 있기 때문에 조직의 훼손이 없는 상태에서 절편이 가능하고 또한 염색상태를 좋게 하며 관찰시 contrast를 증진시킨다. 만약 고정과정을 거치지 않으면 물질의 세포막이 파괴되고 단백질 등의 물질이 용해되어 조직의 변형을 일으켜 제대로 조직을 관찰할 수 없게 된다. 고정과정에는 크게 화학적 고정법과 물리적 고정법이 있다. 화학적 고정법은 생체조직을 화학용액에 처리하는 방법이며, 물리적 고정법은 직접적인 열 혹은 초음파등으로 물질을 고정시키는 방법이다. 표 면과 내부의 열전도가 달라져 고정이 균일하게 되지 않는 단점을 가지고 있기 때문에 보통 2~6일의 고 정시간을 요하는 화학적 고정법을 사용하고 있다. 따라서 조직에 대한 총 검사시간이 최소 6일에서 최 대 12일이 요구된다. 병원등에서 조직검사의 결과가 늦게 발표되는 사유는 바로 화학적 고정법을 사용 하여 생체조직을 관찰하고 그 결과를 판정하기 때문이다. 본 고에서는 마이크로파를 이용하여 약 3시간만에 조직의 상태를 관찰할 수 있는 고정법을 소개한다. 마이크로파를 이용하여 조직을 고정하는 고정방법을 기존의 고정법과 비교하여 이들의 장단점을 나타 낸다. 본 연구자에 의해 개발된 마이크로파 고정기를 소개하고, 이를 이용하여 생체물질을 고정한뒤 절 편, 염색하여 현미경 관찰결과를 발표하여 본 연구의 방법이 기존 방법보다 우수함을 나타낸다.

  • PDF

Effect of Topophysis and Uniting Method of Rootstock and Scion on Rooting and Subsequent Growth of Stenting-propagated (Cutting-grafted) Roses (접수의 채취부위 및 접수와 대목의 고정법에 따른 장미 접삽묘의 생육 특성)

  • Park, Yoo-Gyeong;Jeong, Byoung-Ryong
    • Horticultural Science & Technology
    • /
    • v.28 no.3
    • /
    • pp.456-461
    • /
    • 2010
  • A study was conducted to investigate the effect of topophysis, and uniting method of rootstock and scion on rooting and subsequent growth of stenting-propagated cut rose ($Rosa$ $hybrida$ Hort.) in an effort to develop an efficient stenting propagation method for domestic rose cultivars. Four cultivars used in this study were two standard type cultivars 'Sweet Yellow' and 'Hanmaum', and two spray type cultivars 'Chelsi' and 'May'. Scions were grafted on cuttings of a rootstock $Rosa$ $indica$ 'Major'. The stenting-propagated scion-rootstock unions were planted in rockwool cubes ($50{\times}50{\times}50mm$, Delta, Grodan, Denmark) and were placed in a graft-take chamber for five days before being placed on misted greenhouse beds. The rootstock was removed of all leaves and nodes. Both the base of scions and top of stocks were simultaneously cut at a $45^{\circ}$ angle for grafting. Scions were prepared as single node cuttings, each with a five-leaflet leaf. Three positions of topophysis used were 7-9th (top), 4-6th (middle), and 1st-3rd (bottom) nodes from the stem base. Four uniting materials used were tube, tube + parafilm wrap, tube + clothespin, and clothespin. Rooting and growth were affected by the topophysis and cultivar. The best topophysis for rooting was 7-9th (top) nodes in all cultivars. Topophysis affected percent rooting, and number of roots, length of the longest root, and but not weight, shoot length and graft-take. Rooting and growth were affected by the uniting method and cultivar. Tube uniting method generally showed higher percentage graft-take, percent rooting, and number of roots than other methods. However, rootstock and scion union was not complete in this treatment. On the whole, the greatest rooting and subsequent growth of stenting-propagated plants were found in the tube + clothespin method. Except 'Sweet Yellow', rooting and growth were not adequate in the clothespin method. The results suggested that a tube + clothespin method was the most effective, and this method may be used as a substitute to save labor compared to a tube + parafilm wrap method which is currently being used in commercial nurseries.

골절의 외골격 고정

  • 박성민
    • Journal of the korean veterinary medical association
    • /
    • v.36 no.8
    • /
    • pp.700-705
    • /
    • 2000
  • 외골격 고정법은 이미 외국에서는 골절의 고정, 관절의 일시적 또는 영구적인 고정, 골격 이상 교정 등에 널리 사용되고 있다. 그럼에도 불구하고 국내에서는 소수의 수의사를 제외하고는 별로 사용되고 있지 않아 외골격 고정 장치에 관해 소개해 드리고자 한다.

  • PDF

실험계획법에 의한 화인세라믹스 원통래핑의 최적화에 관한 연구

  • 최민식;김정두
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1992.10a
    • /
    • pp.145-150
    • /
    • 1992
  • 화인세라믹의 우수한 공학적 특성으로 인한 최근의 이용가치 증대와 더불어 세라믹의 고정도 가공에 대한 관심이 높아지고 있다. 다이아몬드휠을 이용한 연삭이나 다이아몬드 공구를 이용한 선삭에 의해 세라믹의 고정도 표면생성을 실현시키고자 하는 연구가 활발히 진행되고는 있으나 아직 미흡한 상태에 있다. 따라서 전통적으로 고정도 표면생성에 널리 용되어 온 래핑에 의한 표면다듬질이 현재 행하여지고 있는 일반적인 방법이다. 본 연구에서는 화인세라믹의 고정도 표면생성을 위한 원통래핑 공정의 최적화 방법으로 실험계획법의 한 응용분야인 반응표면분석법을 이용하였으며 그 결과, 적은 재료와 시간으로 능률적이고 체계적인 실험 및 통계적인 분석을 통해서 원통세라믹의 고정도 표면생성을 위한 최적래핑조건을 찾아내었다.

Estimation of Rotor Resistance and Stator Transient Inductance Using RLS in Stator Flux Oriented Control of Induction Motors (유도전동기 고정자 자속 기준 벡터제어에서 순환 최소자승법을 이용한 회전자 저항 및 고정자 과도 인덕턴스 추정)

  • Lee, Dae-Han;Choi, Jong-Woo
    • Proceedings of the KIPE Conference
    • /
    • 2019.11a
    • /
    • pp.100-101
    • /
    • 2019
  • 본 논문은 유도전동기 고정자 자속 기준 벡터제어에서, 슬립 관계식과 순환 최소자승법을 이용하여 회전자 저항 및 고정자 과도 인덕턴스를 동시에 추정하는 알고리즘을 제안한다. 모의실험을 수행하여, 추정 회전자 저항과 고정자 과도 인덕턴스가 제안된 방법에 의해 각각 실제 값에 수렴함을 보인다.

  • PDF

Immobilization of Transglucosidase from Aspergillus niger (Aspergillus niger 유래의 Transglucosidase의 고정화)

  • Ahn, Jang-Woo;Park, Kwan-Wha;Seo, Jin-Ho
    • Korean Journal of Food Science and Technology
    • /
    • v.29 no.2
    • /
    • pp.320-325
    • /
    • 1997
  • Transglucosidase (TG) from Aspergillus niger was immobilized on various carriers by several immobilization methods such as ionic binding, adsorption, entrapment, covalent linkage and metal chelation to improve the process performance. The covalent linkage with CNBr-activated sepharose 4B was found as the best method for immobilization of TG based on the immobilization yield which was 61.3%. The immobilization through ionic binding and adsorption gave 33.1% and 22.5% yield respectively but both methods were not selected due to lower yield than covalent linkage using CNBr-Sepharose 4B. Internal diffusion resistance in beads developed by entrapment were not suitable factor in producing final target products. Covalent linkage of TG on magnesium silicate, silica gel and glass bead and metal chelation method didn't result in higher yield than the selected one, either.

  • PDF

전해 인프로세스 드레싱법(ELID)을 이용한 고능률.고정도 원통연삭

  • 이득우
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 1993.10a
    • /
    • pp.161-165
    • /
    • 1993
  • 최근 산업의 발달과 함께 제품의 고정도화,다양화,생산성 향상등의 요구에 의해 연삭가공에 있어서도 고능률.고정도가공이 주목되고 있다. 특히 반도체산업,광산업 등에 넓게 응용되고 있는 광학소자 가공에서는 가공정도와 가공능률이 동시에 달성되는 것에 대한 요구가 많지만, 이러한 광학소자의 가공에 있어서 기존의 연마방법은 가공정도와 가공능률에 한계가 있었다. 그런데 연삭가공에서 고능률,고정도가공의 한가지 방법으로 "전해 인프로세스드레싱(Electrolytic In-Process Dressing;ELID)연삭법"이 개발되어 고강도 메탈본드숫돌에 의한 초경합금,세라믹재료등의 경취성재료를 고품위 가공하고 있다. ELID연석법이란 숫돌의 다이아몬드나 cBN등의 연삭입자를 결합하고 있는 금속결합재를 전기분해에 의해 적당량 제거하여 일반적인 연삭과 같이 연삭입자를 연속적으로 돌출시켜 가공이 유지되도록 하는 연삭방법이다. 본 연구는 ELID연삭기술을 이용하여 원통연삭에서 철갈재료 및 세라믹재료의 고능률.고정도 가공특성을 살펴보았다. 원통연삭에서의 주철파이바본드숫돌 및 코발트본드숫돌에 의한 ELID연삭과 비트리파이드본드숫돌에 의한 일반연삭과의 고능률 가공특성을 비교하였다.

  • PDF

Independent Component Analysis of Fixed Point Learning Algorithm Based on Secant Method (할선법에 기초한 고정점 학습알고리즘의 독립성분분석)

  • 조용현;박용수
    • Proceedings of the Korea Multimedia Society Conference
    • /
    • 2002.05c
    • /
    • pp.336-341
    • /
    • 2002
  • 본 연구에서는 엔트로피 최적화를 위한 목적함수의 근을 구하기 위해 단순히 함수 값만을 이용하여 계산을 근사화한 할선법에 기초한 고정점 알고리즘의 독립성분분석 기법을 제안하였다. 이렇게 하면 기존의 뉴우턴법에 기초한 고정점 알고리즘에서 요구되는 복잡한 도함수의 계산과정을 간략화 할 수 있어 더 우수한 학습성능의 독립성분분석이 가능하다. 제안된 학습알고리즘의 독립성분분석 기법을 512$\times$512의 픽셀을 가지는 10개의 영상을 대상으로 임의의 혼합행렬에 따라 발생되는 혼합영상들을 실험하였다. 실험결과, 기존의 뉴우턴법에 기초한 고정점 알고리즘의 분석기법보다 빠른 학습속도와 개선된 분리성능이 있음을 확인하였다. 특히 기존의 알고리즘에서 임의로 설정되는 초기값에 덜 의존하는 학습성능이 있음도 확인할 수 있었다.

  • PDF