• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.199.1-199
• /
• 2003

제주민속주인 좁쌀약주의 제조를 위하여 전국에서 수집된 35종의 누룩으로부터 우수 곰팡이와 효모를 분리하였다. 수집된 누룩의 균수는 곰팡이가 6.4$\times$105~107개, 효모는 1.4$\times$104~107개로 나타났고, 이 중에서 곰팡이 169균주, 효모 103균주를 분리하였으며 전분당화력이 좋은 곰팡이 16균주와 효모 1균주를 선발하였다. 이 중에서 전분당화 균주의 효소활성을 분석한 결과 Aspergillus속으로 동정된 A8-3이 glucoamylase 활성, 액화력, xylanase 활성이 가장 높았고, Rhizopus속으로 동정된 B23-3은 당화력이 가장 우수하였다. 우수효모를 선발하기 위하여 pH, 무게 감량, 내당성, 내알코올성 등을 측정한 결과, Saccharomyces속인 A10-4가 가장 우수하였다. 같은 원료비율로 만든 누룩에 우수균주를 접종하였을 때, 단일 균주를 처리할 때보다 A8-3과 B23-3인 두 균주를 혼합하여 처리한 경우가 당화력이 높게 나타났다. 누룩을 원반형의 누룩과 팰릿(개량형) 형태로 만들어 혼합종균 배양액을 접종한 후 당화력을 측정한 결과, 비슷한 당화력을 나타내었다. 개량형 누룩을 사용하여 양조하는 경우, 좁쌀주 양조에 발효효율을 높일 수 있을 것으로 판단되었다. 수집된 누룩은 수분이 10~13%, 총당은 55~70%, 조단백질은 10~18% 조지방은 0.2~l.0%, 회분은 1.8~2.1%이었다. 본 연구에서 제조한 누룩은 수분이 12~15%, 총당은 61~7l%, 조단백질은 15~20%, 조지방은 0.4~1.5%, 회분은 1.1~1.5%이었다.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.864-865
• /
• 2007

외전형 유도전동기는 내전형에 비해 회전자가 외부에 존재하는 특징을 가지고 있어서 제품의 소형화 및 경량화를 시킬 수 있다는 장점이 있다. 하지만 외전형은 회전자의 직경이 내전형에 비하여 크기 때문에 조립 공정상에 존재하게 되는 회전자와 고정자간의 이심률에 따른 제품 전체의 불균형력이 상대적으로 크며, 이로 인해 모터의 정속적인 운전 방해 및 불규칙한 출력토크로 인한 제품 작동상의 오류발생이 더 크게 나타난다. 본 논문에서는 외전형 유도전동기에서 존재하는 이심률의 크기에 따른 불균형력이 최소화 될 수 있는 슬롯형태를 찾기 위해 회전자 슬롯의 형태를 전폐형, 반폐형, 개구형태의 3가지형태로 변경시킨 후, 이를 전자장 해석을 통해 불균형력을 비교하였다. 또한 이심률이 증가함에 따라 나타나는 불균형력의 증대를 슬롯 형태에 따라 비교 분석하여, 불균형력에 최적화된 외전형 모터의 슬롯형태를 알아보았다.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.67-75
• /
• 2018

In this study, we developed a micropile equipped with ground fixing wedge device which is able to ensure the bearing capacity early before grouting by expanding the tip and exerting the tip surface friction while compressing and expanding the tip of the micropile during loading. The purpose of this study is to verify the applicability of the developed micropile to the ground with various kinds of strength and to compare its characteristics with those of the simple tip expansion micropile. A new test system including a model soil box which can measure the tip resistance and the tip skin friction separately was devised. The loading test was carried out according to the changes of the ground strength and the tip cross section using the devised test systems. As a result of the test, it was found that the developed micropile increased the tip skin friction due to the wedge horizontal force as the soil strength increased and could be applied more effectively to the ground with the strength not lower than the strength of the weathered rock. In addition, it was found that additional bearing capacity could be obtained due to the tip cross section expansion and the wedge horizontal force exertion even in the ground with the strength below the weathered rock strength.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.3
• /
• pp.12-20
• /
• 2023

This study presents basic data on how to secure stability by analyzing the change in tensile force of steel rod and the inclination characteristics of PSC BOX in the "Temporary fixation system using internal prestressing tendon", which is mainly applied to construction of superstructures by FCM. To date, it has been difficult to confirm the changes in tension force of the steel rod and the inclination of the PSC BOX because the steel rod was installed vertically inside the pier and the PSC BOX. Therefore, measurement of the change in length of the steel rod and the displacement of PSC BOX were performed using a micro-measured FBG sensor. Comparisons of the calculated tensile force and the residual tensile force of the steel rod revealed that the safety factor decreased in all bridges. The cause was mainly identified to be the loss of tensile force in fixation~1segment, and countermeasures are suggested. The analysis of the inclination characteristics showed that the inclination increased with the segment progresses even in bridges with sufficient safety factor, and the difference before and after the segment was confirmed. In addition, the increase in inclination was related to the loss of tension force in the steel rod, and the stress on the opposite sides of the inclination was further reduced. It is believed that upward tensile force is generated in the steel rod on the opposite side of the inclined side due to the unbalanced moment, causing the difference in stress of the steel rod between the two sides.

• The Journal of Korean Academy of Prosthodontics
• /
• v.50 no.2
• /
• pp.119-127
• /
• 2012

Purpose: This study was performed to compare the stress distribution pattern of abutment-fixture connection area using 3-dimensional finite element model analysis when 5 different implant systems which have internal connection. Materials and methods: For the analysis, a finite element model of implant was designed to locate at first molar area. Stress distribution was observed when vertical load of 200 N was applied at several points on the occlusal surfaces of the implants, including center, points 1.5 mm, 3.0 mm away from center and oblique load of 200 N was applied $30^{\circ}$ inclined to the implant axis. The finite element model was analyzed by using of 3G. Author (PlassoTech, California, USA). Results: The DAS tech implant (internal step with no taper) showed more favorable stress distribution than other internally connected implants. AS compare to the situations when the loading was applied within the boundary of implants and an oblique loading was applied, it showed higher equivalent stress and equivalent elastic strain when the loading was applied beyond the boundary of implants. Regardless of loading condition, the abutments showed higher equivalent stress and equivalent elastic strain than the fixtures. Conclusion: When the occlusal contact is afforded, the distribution of stress varies depending on the design of connection area and the location of loading. More favorable stress distribution is expected when the contact load was applied within the diameter of fixtures and the DAS tech implant (internal step with no tapering) has more benefits than the other design of internally connected implants.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.203-206
• /
• 2000

Calcium carbonate $(CaCO_3)$ bead immobilized with alginate were developed as buffer system to enhance the cultivation efficiency of bifidobacteria. When Bifidobacteriuim longum KCTC 3128 and HLC 3742 were independently cultivated in 2.5-liter fermenter buffered the $CaCO_3$ bead, NaOH, $Na_2CO_3$, and $NH_4OH$. The proliferation of bifidobacteria and their storage stability were higher in culture broth buffered $CaCO_3$ beads than in culture broth buffered with NaOH, $Na_2CO_3$, and $NH_4OH$. Therefore, $CaCO_3$ bead may be useful as a buffer to enhance of the cultivation efficiency and viability of bifidobacteria.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.17 no.8
• /
• pp.1951-1962
• /
• 1993

The creation process of a typical machined surface is treated here as a dynamic system. An investigation is carried out to establish a relationship between the characteristics of cutting force fluctuations that cause vibration response of the tool-workpiece system and the formation of surface in face cutting by sintered carbide cutting tool. Cutting force is measured and analyzed in frequency domain. The power spectral densities of cutting force give a useful information in surface generation and it can be used to find out the control factor of surface roughness. The terms, PSD ratio & Normalized spindle frequency PSD, are defined and when the value of power in spindle frequency is absolutely little but relatively large, it is obtained high accuracy surface roughness. The aim of this research is to find surface profile by measured and analyzed cutting force signals. The simulation of surface generation gives the comprechension of its mechanism and help to predict and control the surface quality. In this study, it is suggested what informations about surface generation can be acquired from the cuttuing force signal and an way of generating a better surface.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.389-392
• /
• 2004

It is clinically well known that pre-tension of wires increases the fracture stability in ring or hybrid external fixation. In some cases, additional half pin should be necessary to increase the stability when soft tissue impalement occurs during fixation. In this paper, the fracture stability of a hybrid external fixator system with different pre-tension effects and additional half-pins was analysed using FEM to investigate the effects of these pre-tension and half pin on the system stability quantitatively. 3-D finite element models of five different fixator frames were developed using by beam elements. In axial compression analysis, the fracture stiffness was increased maximally 62％ as the pre-tension increased. In torsion analysis, in the other hand, there is little variations in the fracture stiffness. Additional half pin increased the system stiffness about 200 ％. From the results, proper pre-tension and additional half pin would provide good methods to increase the fracture stability of the hybrid external fixator and provide more surgical options to minimize soft tissue damage at the fracture site.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.1
• /
• pp.122-128
• /
• 2004

In this paper, the vibration characteristics of a linear stepping motor(LSM) are analyzed using the ACSL. A magnetic equivalent circuit is based on the structure of the LSM, and then the electric equivalent circuit of the LSM is derived by solving equations for the magnetic equivalent circuit. A normal force is calculated using finite element method(FEM). And the vibration characteristics(continuous vibration) of the LSM are simulated by the ACSL(Advanced Continuous Simulation language) with the voltage equations, the thrust equation, the normal force equation and the kinetic equation.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.5 no.2
• /
• pp.19-27
• /
• 2002

This paper deals with the experimental investigation on the hydrodynamic behavior of the submerged artificial seabed system in regular waves. This system can function as a basis of seaweed forest which will cultivate coastal fishing ground and enhance coastal productivity. The experiment was conducted with the submerged rectangular plates of different length and depth in 2-D wave flume of KRISO/KORDI. The wave exciting forces, mooring line tension and 2-D motion response are measured and analyzed to figure out the design strategy.