• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.27 no.5
• /
• pp.565-574
• /
• 2009

The water vapor weighted vertically mean temperature(Tm) models, which were developed by the consideration of seasonal characteristics over the Korea, was used in the retrieval of precipitable water vapor (PWV) from GPS data which were observed at four GPS permanent stations. Since the weighted mean temperature relates to the water vapor pressure and temperature profile at a site, the accuracy of water vapor information which were estimated from GPS tropospheric wet delay is proportional to the accuracy of the weighted mean temperature. The adaption of Korean seasonal weighted mean temperature model, as an alternative to other formulae which are suggested from other nation, provides an improvement in the accuracy of the GPS PWV estimation. Therefore, it can be concluded that the seasonally appropriate weighted mean temperature model, which is used to convert actual zenith wet delay (ZWD) to the PWV, can be more reduced the relative biases of PWV estimated from GPS signal delays in the troposphere than other annual model, so that it would be useful for GPS PWV estimation with high accuracy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.44 no.11
• /
• pp.1006-1015
• /
• 2016

This paper presents preliminary design and performance analysis of a fast and high precision Tracking Mount for 1m Satellite Laser Ranging(SLR) which is development by Korea Astronomy and Space science Institute(KASI). SLR is considered to be the most accurate technique currently available for the precise orbit determination of Earth satellites. The SLR technique measures the time of flight between pulses emitted from laser transmitter and pulses returned from satellites with laser retro-reflector array. It provides millimeter level precision of range measurements between SLR stations and satellites. A fast and high precision Tracking Mount for SLR which is proposed in this research should be capable of day and nighttime laser tracking about the satellites with laser reflectors from 200 km to 36,000 km altitude(geosynchronous orbit). In order to meet this requirement, we performed mechanical design and structural analysis for Tracking Mount. Also we designed the motion control system and conducted pre-performance analysis to obtain good performance results for a fast and high precision Tracking Mount.

• The Journal of Engineering Geology
• /
• v.6 no.3
• /
• pp.137-153
• /
• 1996

The purpose of this study is to investigate the possibilities of identifying and detecting underground cavities using seismic waves recorded by the fixed and mobile stations. During 18 months of field work we recorded chemical explosions near the Bongdarn station. Seismic Stations were installed on the free surface and underground inside the Samba mine. The seismograms at the fixed(lorg-term) seismic station show abrupt change of polarization characteristics which can he associated with the appearance of P-to-S converted phase(PS) at 150 ~ 200 msec after the first P arrival. This result indicates that converted phases are generated very near to the Bongdarn station at a depth of 190m. Shear-wave splitting phenomena have also been observeci The time delay between fast shear(fS) and slow shear(sS) waves ranges between 30 and 60 msec(average is 42 msec). However, exact time delay between the fast and the slow shear waves can not be accurately measured because of the very short time delay and limitation of sampling rate. Chemical explosion experiments were recorded at stations along various paths to contrast the seismic response of areas with and without cavities. The seismograms recorded at the stations installed at cavity areas show an abrupt change of polarization characteristics but not on the other stations. Seismic waves propagating through the cavity are characterized by the attenuation of high frequency waves and predominantly low frequency seismic waves after the S wave arrivals.

• Journal of Korean Society for Geospatial Information Science
• /
• v.12 no.1 s.28
• /
• pp.55-62
• /
• 2004

More recently, multiple reference based RTK GPS techniques(VRS ; Virtual Reference System) are becoming increasingly important for many precise GPS applications in many countries to overcome the constrained distance limitations of standard RTK systems. The precision of the position solutions of the rover receiver is closely connected with that of the corresponding virtual reference points(VRPs). The objective of this paper is to investigate the accuracy and performance of the VRPs on the test network have been made in post mode, and the overall analysis results were presented by comparing the solutions for the VRPs from the existing GPS reference station with the true values of the coordinates used to produce the observation data. The results show the reasonable accuracies of VRPs in the network area by using the VRS concept in post mode.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.136-136
• /
• 2020

홍수와 가뭄은 우리나라에 대표적인 수재해로서 관련 연구도 활발히 진행되고 있다. 반면 겨울철에 발생하는 적설의 경우 발생빈도와 피해가 상대적으로 적었으며 관련 연구 또한 미비한 실정이다. 우리나라 일부 남부지방은 강우와 다르게 연중 눈이 내리지 않는 경우가 존재하며, 자료 중 '0'값을 가지게 된다. 이로 인해 최적분포형 선정 및 매개변수 추정에 어려움이 있으며, 특히 '0'값으로 인해 단일 확률분포를 이용한 빈도해석은 한계가 있다. 본 연구에서는 연중 눈이 내리지 않는 무적설량을 고려하기 위하여 두 가지 이상의 확률분포함수를 결합한 혼합분포함수를 개발하였다. Bayesian 기법을 이용하여 무강우의 기준이 되는 값(δ)을 매개변수로 고려하여 추정하였으며, 이에 따른 적설발생 평균확률(P을 Mixing Ratio로 고려하여 혼합분포함수를 제시하였다. 본 연구에서는 기상청 산하 관측소 중 20년 이상의 지점을 선정하여 최심신적설량을 활용하였으며, 빈도별 확률적설심을 산정하였다. 적합한 확률분포형 선정을 위해 먼저 Bayesian 기법으로 매개변수와 우도함수를 산정한 후 각 분포형의 BIC(bayesian information criterion)값을 비교하였다. 선정된 최적분포형에 대해 빈도분석을 실시하여 최심신적설량을 제시하였다. 추가적으로 무강우를 기존 기준인 '0'으로 고정하여 본 연구에서 제시한 결과 값과 비교하였다.

• Journal of Astronomy and Space Sciences
• /
• v.23 no.4
• /
• pp.385-396
• /
• 2006

The International GNSS Service (IGS) has prepared for a transition from the relative phase conte. variation (PCV) to the absolute PCV, because the terrestrial scale problem of the absolute PCV was resolved by estimating the PCV of the GPS satellites. Thus, the GPS data will be processed by using the absolute PCV which will be an IGS standard model in the near future. It is necessary to compare and analyze the results between the relative PCV and the absolute PCV for the establishment of the reliable processing strategy. This research analyzes the effect caused by the absolute PCV via the GPS network data processing. First, the four IGS stations, Daejeon, Suwon, Beijing and Wuhan, are selected to make longer baselines than 1000km, and processed by using the relative PCV and the absolute PCV to examine the effect of the antenna raydome. Beijing and Wuhan stations of which the length of baselines are longer than 1000km show the average difference of 1.33cm in the vertical component, and 2.97cm when the antenna raydomes are considered. Second, the 7 permanent GPS stations among the total 9 stations, operated by Korea Astronomy and Space Science Institute, are processed by applying the relative PCV and the absolute PCV, and their results are compared and analyzed. An insignificant effect of the absolute PCV is shown in Korea regional network with the average difference of 0.12cm in the vertical component.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.3
• /
• pp.31-40
• /
• 2017

This paper deals with the high precision of GPS measurement reduction and its implementation on near real-time and kinematic mode for those applications requiring centimeter-level precision of the estimated coordinates, even if target stations are a few hundred kilometers away from their references. We designed the system architecture, data streaming and processing scheme. Intensive investigation was performed to determine the characteristics of the GPS medium-range functional model, IGS infrastructure and some exemplary systems. The designed system consisted of streaming and processing units; the former automatically collects GPS data through Ntrip and IGS ultra-rapid products by FTP connection, whereas the latter handles the reduction of GPS observables on static and kinematic mode to a time series of the target stations' 3D coordinates. The data streaming unit was realized by a DOS batch file, perl script and BKG's BNC program, whereas the processing unit was implemented by definition of a process control file of BPE. To assess the functionality and precision of the positional solutions, an experiment was carried out against a network comprising seven GPS stations with baselines ranging from a few hundred up to a thousand kilometers. The results confirmed that the function of the whole system properly operated as designed, with a precision better than ${\pm}1cm$ in each of the positional component with 95% confidence level.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.138-146
• /
• 2011

With the increased use of GPS in the field of various applications including surveying, the request for fast and precise positional information has increased. Several countries such as USA, Canada, and Australia have already been operating Internet-based automatic GPS data analysis system using e-mail and FTP. Expanding GPS market, it is necessary to establish automatic GPS baseline processing system that is accessible via Internet. The system developed in this study is operating on the web, and it allows the users to access easily regardless of time and place. The main processing engines are Bernese V5.0 and PAGES. They process user data with three GPS CORS(Continuously Operating Reference Station), and then send the report to the users through e-mail. This system allows users to process high accurate GPS data easily. It is expected that this system will be used for various GPS applications such as monitoring large-scale structures and providing spatial information services in private sector.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.26 no.6
• /
• pp.549-559
• /
• 2008

This study verified the limitations of commercial GPS data processing software and the applicability on precise positioning through comparing the processing results between Bernese and TGO under various conditions. To achieve the goal, we selected three nationwide station data and two smaller local data to constitute networks. By using Bernese and TGO, those networks are processed through the baseline analysis and the network adjustment. The comparative analysis was carried out, in terms of software, baseline length and network scale, observation duration, and number of fixed points. In the comparison between softwares, the scientific software was excellent in accuracy. It was confirmed that, as GPS-related technology is developed, the performance of the receiver was enhanced. And, in parallel with this, even the functionalities of the commercial software were tremendously enhanced. The difference, however, in result between the scientific and commercial software are still exist even if it is not big. Therefore, this study confirms that the scientific software should be used when the most precise position is necessary to be computed, especially if baseline vectors are big.

• The Korean Journal of Applied Statistics
• /
• v.28 no.2
• /
• pp.137-149
• /
• 2015

Flood planning needs to recognize trends for extreme precipitation events. Especially, the r-year return level is a common measure for extreme events. In this paper, we present a nonstationary temporal model for precipitation return levels using a hierarchical Bayesian modeling. For intensity, we model annual maximum daily precipitation measured in Korea with a generalized extreme value (GEV). The temporal dependence among the return levels is incorporated to the model for GEV model parameters and a linear model with autoregressive error terms. We apply the proposed model to precipitation data collected from various stations in Korea from 1973 to 2011.