• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.33-39
• /
• 1999

This paper included a data analysis of the unit of medical devices using mainternance recording card that had medical devices of unit failure mode, hospital of failure mode and MTBF. The results of the analysis were as follows : 1. Medical devices of unit failure mode was the highest in QC/PM such A hospital as 33.9%, B hospital 30.9%, C hospital 30.3%, second degree was the Electrical and Electronic failure such A hospital as 23.5%, B hospital 25.3%, C hospital 28%, third degree was mechanical failure such A hospital as 19.5%, B hospital 22.5%, C hospital 25.4%. 2. Hospital of failure mode was the highest in Mobile X-ray device(A hospital 62.5%, B hospital 69.5%, C hospital 37.4%), and was the lowest in Sono devices(A hospital 16.76%, B hospital 8.4%, C hospital 7%). 3. Mean time between failures(MTBT) was the highest in SONO devices and was the lowest in Mobile X-ray devices which have 200 - 400 failure hours. 4. Anverage failure ratio was the highest in Mobile X-ray devices(A hospital 31.3%, B hospital 34.8%, C hospital 18.7%), and was the lowest in Sono(Ultrasound) devices (A hospital 8.4%, B hospital 4.2%, C hospital 3.5%). 5. Failure ratio results of medical devices according to QC/PM part of unit failure mode were as follows ; A hospital was the highest part of QC/PM (50%) in Mamo X-ray device and was the lowest part of QC/PM(26.4%) in Castro X-ray. B hospital was the highest part of QC/PM(56%) in Mobile X-ray device, and the lowest part of QC/PM(12%) in Gastro X-ray. C hospital was the highest part of QC/PM(60%) in R/F X-ray device, and the lowest a part of QC/PM(21%) in Universal X-ray. It was found that the units responsible for most failure decreased by systematic management. We made the preventive maintenance schedule focusing on adjustement of operating and dust removal.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.1320-1323
• /
• 2008

현재 건설교통부 한강홍수통제소에서는 96개의(2006 한국수문조사연보 기준) 수위관측소를 설치 운영하고 있으며 현장에서 수집되는 수위자료의 전송방법은 크게 두 가지로 중계소를 통해 실시간으로 전송되는 TM(TeleMetering) 방식과 기록지(Recording) 방식으로 구분된다. 고품질 수위자료의 생산 및 제공은 비단 수자원 관련 연구 분야에서 뿐만 아니라 하천의 효율적인 관리, 각종 국토개발계획 등에 다양하게 이용되고 있으며 특히 TM 자료의 경우는 실시간으로 현장에서 관측되는 수문자료를 수집하여 홍수예보시스템의 가장 중요한 입력자료로서 활용된다. 한강홍수통제소에서 구축 운영하고 있는 TM 수위자료와 일반 수위자료를 대상으로 현황을 검토한 결과 일반적으로 수위관측소의 자료 오류 유형을 관측기기부터 전송단계별로 분류하면 수위계 기기 고장(부자 걸림 등), 전송로 변경 및 통신 장비 고장 등으로 인한 오 결측으로 구분될 수 있다. 과거 오 결측된 자료를 보정하기 위한 방법으로는 2시간, 3시간 전(前)수위 자료를 이용해 이상치를 보정하는 것이 유일하게 활용되고 있었으나 작년에 한강수계를 대상으로 "국가수문자료 품질관리시스템구축(1차)" 연구 용역을 실시하여 시범 구축 결과를 금년부터 활용하고 있으며 본 시스템에 자료보정에 대한 다양한 방법이 탑재되어 있다. 이와 별도로 기왕자료의 보정방법으로 TM과 일반방식이 이중화 되어 있는 관측소의 경우에는 연속적인 자료를 나타내는 기록지 자료를 활용하는 것이 대안으로 제시되고 있다. 하지만, 기록지 자료를 통해 오 결측된 TM 자료를 보완하는 것에 대해서는 아직 연구된 바가 없으며 이와 관련된 다각적인 검토가 국내에서 부족한 실정이므로 본 연구에서는 실제 한강홍수통제소에서 관할하고 있는 이중화 기록방식의 관측소를 선정하여 TM과 기록지 수위관측자료의 비교 분석을 통해 오 결측된 TM 자료를 일반 기록지 자료로 보완에 하는 것에 대한 실효성을 심도 있게 검토하여 수위자료 품질향상의 기반을 마련코자 한다.

• Journal of the Korea Society of Computer and Information
• /
• v.19 no.2
• /
• pp.21-30
• /
• 2014

The use of induction motors has been recently increasing in a variety of industrial sites, and they play a significant role. This has motivated that many researchers have studied on developing fault detection and classification systems of induction motors in order to reduce economical damage caused by their faults. To early identify induction motor faults, this paper effectively estimates spectral envelopes of each induction motor fault by utilizing a linear prediction coding (LPC) analysis technique and an expectation maximization (EM) algorithm. Moreover, this paper classifies induction motor faults into their corresponding categories by calculating Mahalanobis distance using the estimated spectral envelopes and finding the minimum distance. Experimental results show that the proposed approach yields higher classification accuracies than the state-of-the-art conventional approach for both noiseless and noisy environments for identifying the induction motor faults.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.26 no.1
• /
• pp.83-90
• /
• 2023

The external store fitted to the aircraft may affect the flight characteristics and flight safety of the aircraft, which requires the analyses and testing on it. The purpose of this study is to identify and analyze types of failures that can affect the flight safety of aircraft due to the installation of external stores, and to check the flight safety of aircraft through dropping tests of the external stores. After identifying the types of failures that could affect the flight safety of the aircraft, the criticality was calculated to analyze the effect on the flight safety of the aircraft. Four types of failures were selected: unintentional dropping, failure of dropping, unintentional main wing deployment, and release of tail wing restraint of the external store, which are considered to affect the flight safety of the aircraft due to the operation of the external store. As a result of the aircraft's flight safety analysis on the failure types, the criticality requirements were met. Based on this, after obtaining the airworthiness certification, the drop test was successfully performed to confirm the flight safety of the aircraft by mounting an external store on the aircraft. However, in addition to the four hazards carried out in this study, the real external stores of the military aircraft may have various factors affecting the flight safety of the aircraft, so further research will be needed.

• Journal of the military operations research society of Korea
• /
• v.35 no.3
• /
• pp.17-30
• /
• 2009

In this study, we propose the operational availability computation model that can be used on the weapon system's requirement planning phase. The proposed model consists of the time parameters of Ao(Operational Availability) for a system and each time parameter's estimation method. The time parameters for Ao computation are TT(Total Time) and TDT(Total Down Time). The time parameters are defined by considering OMS/MP(Operational Mode Summary/Mission Profile) elements. TT is a calendar time as a specific mission time at wartime or one year at peacetime. TDT consists of TPM(Total Preventive Maintenance time), TCM (Total Corrective maintenance time), TALDT(Total Administrative and Logistics Down Time). Then the estimation method for these time parameters are presented by the weapon systems types.

• KSCI Review
• /
• v.14 no.2
• /
• pp.129-134
• /
• 2006

In this paper, we designed and implemented DCS terminal remote monitoring middleware for real-time auditor and management terminal status signal with relay and fuse status at power management room. The middleware consist of four component as event analyzer, event manager, service manager and user interface. We expected economic effects extend relay life-time that pre-detected errors and prevented relay fault.

• 열병합발전
• /
• s.69
• /
• pp.15-20
• /
• 2009

소수력 계획 시 개발지점에 대하여 수많은 자료와 정보 등을 필요로 하게 되는데 특히 해당지역내의 유량분포에 대한 유황자료는 개발의 판단여부를 결정케 하는 중요한 요소이다. 소수력발전소의 설비용량에 직접 관계되는 설계유량의 결정과 재해방지를 위한 유출의 예측을 가능케 하고 발전소운영 시 가동률 및 경제성에도 직접적인 영향을 미치는 중용한 요소이나 여기서 논하는 소수력개발은 하천이나 댐과 같은 유형이 아니라 일정한 유량을 확보하여 배출하기 때문에 문제는 없다. 그러나 계절별 부하에 따른 냉각수량의 변화 및 소수력 발전유량의 변동, 조위(해수면) 변화 등에 따라 달라진다. 그러므로 수위조절을 위한 수문은 이들의 변화에 따라 자동운전이 가능해야 하지만 운전시 발전정격수위를 맞출 수 있도록 수문을 조절한 다음 Turbine Governor에 의해 유량 및 수위를 제어할 수 있도록 설계하여 냉각수 순환수 계통에 영향이 미치지 않게 언제나 적정수위를 유지시킬 수 있는 운전모드로 구축하는 것이 안정이라 볼 수 있다. 소수력발전설비 및 수문의 오작동 및 고장이 발생할 때 수위가 상승하여 냉각계통에 손실수두 증가, 취수펌프의 양정고 증가와 Surge 발생 등으로 발전소의 정상 운전에 미치는 영향이 없어야 하므로 세밀한 검토가 필요하기 때문에 폐쇄시간과 수압상승 값 등 요인 분석후 설계하여야 한다. Figure A와 같이 국내 화력발전단지에서 냉각수로 사용되고 방류되는 해수는 발전소에 따라 ca.70~150 CMS로 ca.2,000~5000 kW 이상의 수력에너지(H=4m 형성 기준)를 보유하고 있으나, 현재 활용되지 못하고 그대로 해양으로 방류되고 있어 이 수력에너지의 개발 방안을 오래전부터 검토하여 왔다. 발전소 온배수의 원활한 배수를 위한 설계 낙차와 함께 남서해안의 조위변화에 따른 낙차를 이용하는 것으로 소수력 발전 방식과 조력발전 방식의 특징을 동시에 활용할 수 있다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.24 no.1
• /
• pp.134-137
• /
• 2020

Recently, there are emphasized to support the maintenance and management system of vessels using acquired data from engine part equipment. But, there are limitations for data exchange and management. To solve the problem, the ISO published ISO 19847 and 19848. In this paper, we analyze the ISO 19848 requirements related to identify data channel ID for ship equipment, and propose the examples for applying encoding techniques. In addition, we suggest the proposed technique for applying of managing the failure and maintenance type of the ship's engine part facilities by examples. If this method is applied, the vessel's equipment can exchange data through the sharing of the code table, and express what response is needed or acted, including where the failure occurred.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.13-14
• /
• 2020

본 논문에서는 엣지 컴퓨팅 환경에서 머신러닝을 활용해 에스컬레이터 이상 감지 및 결함 분류를 하는 연구를 진행하였다. 엣지 컴퓨팅 기반 머신러닝을 사용해 에스컬레이터의 이상 감지 및 결함 분류를 위한 OneM2M환경을 구축하였으며 에스컬레이터에서 발생하는 소음에서 고장 유형에 따라 나타나는 주파수를 이용한다. Edge TPU를 활용해 엣지 컴퓨팅 시스템의 처리량을 최대화하고, 각 작업의 수행시간을 최소화함으로써 엣지 컴퓨팅 환경에서 이상 감지와 결함 분류를 수행할 수 있다.

• The Journal of Korean Society for Radiation Therapy
• /
• v.20 no.2
• /
• pp.91-102
• /
• 2008

Purpose: To enlarge the efficiency of operation and establish a constituency for development of new radiotherapy treatment through database which is established by arranging and indexing radiotherapy related affairs in well organized manner to have easy access by the user. Materials and Methods: In this study, Access program provided by Microsoft (MS Office Access) was used to operate the data base. The data of radiation oncology was distinguished by a business logs and maintenance expenditure in addition to stock management of accessories with respect to affairs and machinery management. Data for education and research was distinguished by education material for department duties, user manual and related thesis depending upon its property. Registration of data was designed to have input form according to its subject and the information of data was designed to be inspected by making a report. Number of machine failure in addition to its respective repairing hours from machine maintenance expenditure in a period of January 2008 to April 2009 was analyzed with the result of initial system usage and one year after the usage. Results: Radiation oncology database system was accomplished by distinguishing work related and research related criteria. The data are arranged and collected according to its subjects and classes, and can be accessed by searching the required data through referring the descriptions from each criteria. 32.3% of total average time was reduced on analyzing repairing hours by acquiring number of machine failure in addition to its type in a period of January 2008 to April 2009 through machine maintenance expenditure. Conclusion: On distinguishing and indexing present and past data upon its subjective criteria through the database system for radiation oncology, the use of information can be easily accessed to enlarge the efficiency of operation, and in further, can be a constituency for improvement of work process by acquiring various information required for new radiotherapy treatment in real time.