• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.499-502
• /
• 2014

This paper presents a comparison study between simulation and experiment for fault diagnostics of a spur gear. In simulation, fault diagnostics using transmission error (TE) was performed and concluded to be valid. In a real experiment, however, it is not as easy to detect faults of gears using TE as in simulation. In this paper, after seeding the various faults like tooth crack of different length, tooth breakage and spalling in test rig, TE was calculated. Then, several signal processing techniques were performed to overcome the limitations of an experiment in detecting the fault signals of TE. After signal processing, we could detect the various faults of spur gears and different amplitude of TE sparks from cracks of different length. Then we discussed the difference between simulation and experment.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.495-502
• /
• 2006

A fault diagnosis method is developed in this study using automaton through quantization of vibration signals for normal and faulty conditions, respectively. Automaton is a kind of qualitative model which describes the system behaviour at the level of abstraction. The system behavior was extracted from the probability of the output sequence of vibration signals. The sequence was made as vibration levels by reconstructing the originally measured vibration signals. As an example, a fault diagnosis for the bearing of ATM machine was done, which detected the bearing fault with confident level compared to any other existing methods of kurtosis or spectrum analysis.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2005.04a
• /
• pp.177-180
• /
• 2005

본 연구는 연속 회분식 반응기(SBR) 공정에서 시계열 데이터 마이닝을 이용하여 공정에 사용된 기기의 고장 진단 알고리즘 개발에 대한 내용을 보여주고 있다. 공정에서 비정상적인 반응을 유발하는 장비 관리에 대한 연구는 폭넓게 수행되고 있지 않으므로, 이러한 장비 진단은 소규모 하$\cdot$폐수처리장을 무인자동화로 통합관리에 유용하게 적용될 수 있다. 본 연구에서는 진동신호를 이용하여 무인자동화를 위해 선행되어야 하는 공정기기의 공장진단에 관한 알고리즘을 개발하였다.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2016.01a
• /
• pp.19-20
• /
• 2016

본 논문에서는 서포트 벡터 머신 (SVM)의 분류 성능에 영향을 주는 인수인 C와 ${\sigma}$ 값을 적응적으로 최적화할 수 있는 적응적 자가튜닝 SVM을 이용한 베어링의 상태 진단 방법을 제안한다. SVM의 각 인수의 변화에 따른 베어링 상태 진단의 성능 변화 패턴을 분석하여 적합한 인수를 적응적으로 찾을 수 있는 방법을 제안하고, 제안한 방법의 우수성을 검증하기 위해 실제 베어링 신호를 이용하여 기존방법인 격자탐색과의 성능을 비교하였다.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.275-277
• /
• 2001

열차제어시스템의 소프트웨어는 높은 신뢰성과 안전성이 요구된다. 이를 위해 철도에서는 고장회피(Fault Avoidance) 기법과 고장허용(Fault Tolerance)기법을 사용하고 있다. 그러나 최근 신호설비의 소프트웨어 신뢰성을 좀더 향상시키기 위해 일본, 프랑스, 스웨덴 등에서는 안전에 치명적인 시스템에 사용되고 있는 정형기법(Forma) Method)을 포함하여 많은 연구를 수행중이다. 본고에서는 국외 관련분야를 분석하고, 열차제어시스템 소프트웨어의 신뢰성 향상에 관하여 기술하고자 한다.

• Proceedings of the KIEE Conference
• /
• 2003.11a
• /
• pp.361-363
• /
• 2003

To reduce the effect of fault on underground power cable, we need exact and fast fault location detection technique. In this thesis, we describe on filter design technique that can be applied to on-line fault defection technique. To design fitter for fault location defection on Power cable, we should analysis fault signal. So we designed test bed for fault generation and measured fault signals for analysis. Through the analysis of signals, we found that ANC filter can be applied to separate fault signals and we designed a ANC filter. We tested on the designed filter through computer simulation, and we describe its results in this paper.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2002.04b
• /
• pp.1261-1264
• /
• 2002

개인 통신 서비스에서 주된 당면 문제중의 하나는 위치를 자주 이동하는 많은 이동 단말기들의 위치를 찾는 것이다. 위치 관리를 성취하기 위하여 많은 네트워크 신호처리 트래픽과 데이터베이스 질의가 요구된다. 다수의 정책들은 이동 단말기의 현재 위치를 저장하기 위하여 위치 레지스터 데이터베이스를 사용하고, 그 위치 레지스터의 고장에 대해 약점을 가지고 있다. 이 논문에서, 우리는 위치 레지스터들의 고장을 포용하는 분산 홈 위치 레지스터를 갖는 결함 포용 전방 포인터 방법을 제안한다. 제안하는 방법의 성공을 분석적 모델로 평가하고, Biaz의 우회 전방 정책, 두개 경로 전방 정책과 성능을 비교한다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.279-284
• /
• 2005

Knowledge based fault diagnosis has a limitation in determining the cause and scheme for the fault, because it detects faults from signal pattern only Therefore, model-based fault diagnosis is requested to determine the fault by analyzing output of the equipment from its dynamic model. This research shows a method how to devise the automaton of system as a model for normal and faulty condition through the reduction of handling data by quantization of vibration signals and the example which is concerning to the bearing of ATM. The developed model based fault diagnosis was applied to detect the faulty bearing of ATM, which results.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.3
• /
• pp.246-252
• /
• 2016

Since thermal power plant (TPP) equipment is operated under very high pressure and temperature, failures of the equipment give rise to severe losses of life and property. To prevent the losses, fault detection method is, therefore, absolutely necessary to identify abnormal operating conditions of the equipment in advance. In this paper, we present Mahalanobis distance (MD) based fault detection method for steam boiler tube in TPP. In the MD-based method, it is supposed that abnormal data samples are far away from normal samples. Using multivariate samples collected from normal target system, mean vector and covariance matrix are calculated and threshold value of MD is decided. In a test phase, after calculating the MDs between the mean vector and test samples, alarm signals occur if the MDs exceed the predefined threshold. To demonstrate the performance, a failure case due to boiler tube leakage in 200MW TPP is employed. The experimental results show that the presented method can perform early detection of boiler tube leakage successfully.

• The Journal of the Korea Contents Association
• /
• v.16 no.8
• /
• pp.671-680
• /
• 2016

This research suggested a new real-time traffic signal control algorithm using fusion data of the travel time and the occupancy rate. This research applied the travel time data of traffic information system to traffic signal operation, and developed the signal control process using the degree of saturation that was estimated from the travel time data. This algorithm estimates a queue length from the travel time based on a deterministic delay model, and includes the process to change from the queue length to the degree of saturation. In addition, this model can calculate the traffic signal timings using fusion data of the travel time and the occupancy rate based on the saturation degree. The micro simulation analysis was conducted for effectiveness evaluation. We checked that the average delay decreased by up to 27 percent. In addition, we checked that this signal control algorithm could respond to a traffic condition of oversaturation and detector breakdown effectively and usefully. This research has important contribution to apply the traffic information system to traffic signal operation sectors.