• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.1 s.71
• /
• pp.55-62
• /
• 2006

The natural frequency of a beam plays a critical role in the dynamic analysis of beams. Especially it is a complicated and difficult task to analyse the natural frequency of a stepped beam with an irregularly varying section. The lumped mass methods, multi-degree of freedom analyses, are mainly used for the analysis of this kind of stepped beams. The accuracy of these methods are determined by the number of the partitions of elements, the number of the iterations in calculation, and the accuracy of assumed mode shapes. This study presents a method of transformation from symmetrically stepped beams to an equivalent beam and a method of the eigenvalue analysis. Appropriateness and utility of this method are demonstrated by comparing examples from other literatures and various models.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.276-276
• /
• 2017

홍수 시 하천의 급격한 유량증가로 인하여 하상의 변화를 야기할 수 있으며, 이를 저감하기 위한 하천사업에는 자연친환경적이고 고유속흐름에서도 변동되지 않는 하상재료를 도입한 연구들이 다양하게 진행되고 있으며, 과거 제방보호 기능만을 가진 단순한 호안에서 식생을 이용한 다양한 종류의 호안공법이 개발되어 각종 하천에 도입되고 있다. 호안공법을 도입할 때 고유속흐름과 식생의 유무에 따라 하천의 흐름에 미치는 영향을 파악하는 것은 하천설계에 있어 중요한 부분이다. 최근에는 기후변화로 인한 극우강우가 많아지고 호안의 안정성을 위한 평가기법이 제시되지 않기 때문에 호안사면의 수리학적 안정성과 지반공학적 파괴거동의 적절한 평가가 필요하다. 따라서 본 연구에서는 식생 유무에 따라 유속, 레이놀즈수, 바닥전단응력 등을 산정하여 흐름특성을 파악하고 호안 및 제방에 대한 적용성을 검토하고자 실험연구를 진행하였다. 실험에 사용된 재료는 모래, 식생점토. 본 연구를 위해 자체적으로 양생시킨 잔디를 이용하였으며, 실내 고속수로 실험 장치를 이용하여 유속의 변화에 따라 실험을 실시하였다. 이를 통해 초기상태의 재료와 세굴 이후의 세굴심을 비교하여 고유속흐름에서의 식생 유무에 따른 하상재료 유실변화 정도를 비교하고자 하였다.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.503-517
• /
• 2021

This study is focused on tourism storytelling(educational, interesting, emotional, uniqueness), SNS tourism value (functional, social), SNS trust, and immersion in travel agency relationship, which are important discussions in the tourism industry. The study subjects are verified 390 respondents who had accommodation experience using SNS, and SPSS 25.0 and Smart PLS 3.0 were used to perform the analysis. The study results are as follows. First, it was confirmed that the educational and interesting factors of tourism storytelling had a positive effect on the functional value, and that the affective relationship was not established between emotional and uniqueness factors. In addition, it was confirmed that educational, interesting, and uniqueness factors had a positive effect on social values, but emotional factors did not establish an influence relationship. Secondly, it was confirmed that SNS tourism value had a positive effect on immersion in travel agency relationship. However, there was no relationship between SNS tourism value and social value. Finally, it was confirmed that SNS trust had a moderating effect on the relationship between SNS tourism value and immersion in travel agency relationship. Through these research results and implications, comprehensive recommendations were presented to tourism industry practitioners.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.9 no.3
• /
• pp.276-286
• /
• 2021

General high fluidity concrete is the area of high strength concrete with a high amount of cement to secure the required fluidity and workability. Since most of the concrete structures currently used have normal strength, there is a limit to the practical expansion and practicality of use. Thus it is necessary to develop normal strength-high fluidity concrete with low binders that can be used not only in general buildings but also in special buildings, and can greatly reduce construction time and save labor costs. This requires to develop and apply the polycarboxylate-based superplasticizer. In this study, PCE was prepared for each combination of starting materials(WR, HB, RT) and the rheological properties of cement paste were analyzed using ringflow cone and a rotary viscometer. As a result, when PCE with a combination of WR 80%, HB 6.5%, and RT 13.5% was applied, the yield stress can be minimized while securing the plastic viscosity at level of the normal strength. In addition, high fluidity due to the high dispersion effect was confirmed.

• Journal of the Korea Concrete Institute
• /
• v.14 no.2
• /
• pp.223-230
• /
• 2002

The main intent of this research was to determine the feasibility of utilizing recycling bottom ash as CLSM (controlled low-strength material). CLSM is a cementitious material, commonly a blend of portland cement, fly ash, sand, and water, that is usually flowable and self-leveling at the time of placement. The durability characteristics of mixtures made bottom ash we compared with those of fly ash CLSM in order to evaluate the effectiveness and suitability of bottom ash as material in CLSM. A comprehensive evaluation of the bottom ash in CLSM and mix proportions indicated that the bottom ash are capable of performing as CLSM mixtures. The durability characteristic of CLSM incorporating the bottom ash under various physical and chemical causes of deterioration were investigated. Test results indicated that CLSM using bottom ash has acceptable durability performance. CLSM incorporating with bottom ash were also found to be environmentally safe.

• Journal of the Korean GEO-environmental Society
• /
• v.12 no.6
• /
• pp.53-60
• /
• 2011

The purpose of this study is to propose a method that can reliably evaluate the fundamental period of a rockfill dam using the micro-earthquake records, which were obtained at the domestic dam sites. For total 20 micro-earthquake records obtained at 7 domestic rockfill dam sites against 6 earthquake events which recently occurred, the fundamental periods of seven rockfill dams were evaluated by two kinds of methods; one is a method using acceleration amplification ratio and the other is a method using acceleration response spectrum ratio. Applicability of each method to evaluation of fundamental periods of domestic rockfill dams was examined. In the moderate seismicity region like our country, the method using acceleration response spectrum ratio, which could evaluate the fundamental period of the rockfill dam using the ratio between the response spectrum for acceleration observed at the dam crest and that observed at the dam base or abutment, proved to be reliable and was proposed in this study. From the results of analyses, it was found that the proposed method could consistently evaluate the fundamental period of the rockfill dam and the results obtained by the proposed method were very similar to the results by the existing method which was proposed from the analysis for the earthquake records observed at Japanese dam sites.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.8 no.4
• /
• pp.195-202
• /
• 2004

In this study, it was founded to make the optimal mixture for producing concrete which is self-compacting, yet, and generates low heat of hydration by using flyash, blast furnace slags and limestone powders as binders in addition to cement while using super-plasticizers and viscosity agents as admixture agents. The structural behaviors of the concrete produced with the selected mixture were compared with those of the concrete currently using for construction of nuclear power plants. The study shows that the blended high fluidity concrete including limestone is better in workability and durability than the concrete currently in use for nuclear power plants.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.42-47
• /
• 2011

A method of calculating natural frequencies corresponding to the modes of vibration of beams and tower structures with irregular cross sections and arbitrary boundary conditions was developed. The result is compared with that of the beam theory. Finite difference method is used for this purpose. The influence of the $D_{22}$ stiffness on the natural frequency is rigorously investigated. In this paper, the relation between the applied loading sizes and the natural frequency of vibration of some structural elements is presented. The results of application of this method to steel bridge and reinforced concrete slab bridge by using specially orthotropic plate theory is presented.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.1109-1112
• /
• 2008

Concrete structure is recognized as the universal structuring material for its outstanding formability, economic efficiency, and strength development. However, as the ageing of field workers and the deficiency of skilled workers due to evasions from 3D business have recently become the major issues of the industry in Korea and as the materials are becoming more diversified and complicated for today's concrete structures are becoming higher, larger, and specialized, the need for practicality of construction work based on new technology and new method has greatly increased. Therefore, the overall condition of today's construction business requires researches and developments on the high fluidity concrete for higher construction efficiency and quality improvements. With this reason, this study investigated study development tendency and development situation of the high fluidity concrete, arranged experiment performance, and domestic or international specification used in performance valuation of the high fluidity concrete.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2009.04a
• /
• pp.89-92
• /
• 2009

본 논문에서는 비선형구조물의 위상최적화를 위하여 개발된 요소 연결 매개법 (Element Connectivity Parameterization Method)을 이용하여 기하비선형 구조물의 고유진동수(Eigenfrequency)를 최적화하는 연구를 소개한다. 기존의 밀도를 기반으로 한 위상최적화기법은 비선형 구조물의 위상최적화를 수행할 때 약한 탄성계수를 가지는 요소가 대변형을 일으켜 전체 강성행렬(Tangent Stiffness Matrix)이 양정정성(Positive definiteness)를 잃어버리는 문제점이 있어서 위상최적화를 수행하기 어렵다. 이 문제점을 해결하기 위하여 최근에 요소 연결 매개법(Element Connectivity Parameterization Method)이 개발되었다. 이 요소 연결 매개법은 요소의 강성을 설계하는 것이 아니라 요소의 연결성을 설계하는 기법으로 이를 이용하여 비선형 구조물의 위상최적화를 효과적으로 수행할 수 있다. 이 연구에서는 요소 연결 매개법을 동적인 문제에 적용하기 위한 연구를 수행하며 이를 이용하여 비선형 구조물의 고유진동수를 최적화 하는 위상최적화 문제에 적용하였다. 비선형 수치 예제를 통하여 기하 비선형 구조물의 고유진동수를 최대화를 통하여 기하 비선형 구조물의 강성최대화 문제와 같은 결과를 얻을 수 있었다.