• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.1
• /
• pp.79-89
• /
• 2001

Anaerobic Digestion - Thermophilic Oxic Process(ADTOP) has been known to be one way reducing and composting of organic wastes without draining or forming excess sludge. It could be completely performed by the evaporation of water using the bio-energy from the microbial degradation of organic. In the present study the complete treatment of Chinese restaurant wastes was conducted and utility of bio-energy produced from the ADTOP was estimated. Base on results, it could be concluded as follows; 1) chinese restaurant wastes could be completely treated using the TOP without draining or excess sludge. Maximum volumetric loading rate was determined as $55.0kg-garbage/m^3$. Input water was almostly evaporated and 90.5% of carboneous organic wastes was conversed to carbondioxide. 2)The optimum volumetric loading rate which is acceptable to maintain over $55^{\circ}C$ in the anaerobic digester was determined as $45kg-garbage/m^3{\cdot}d$. 3) The optimum HRT was at least over 10 days in order to maintain about $50^{\circ}C$ in the anaerobic digester using bio-energy produced from TOP. Therefore the utilization of bio-energy produced from TOP could be used in the process which had long HRT such as the anaerobic digestion. 4) The efficiency of anaerobic digester rate were over 90% by the ADTOP under the organic loading rate of $1.1kg-COD/m^3{\cdot}d$, 50kg-Chinese restaurant garbage and $250{\ell}/m^3{\cdot}min$ of the aeration rate.

• Environmental engineer
• /
• s.20
• /
• pp.36-37
• /
• 1988

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.1
• /
• pp.67-77
• /
• 1999

The biodegradation of algae coagulated with poly aluminum chloride(PAC) was investigated by using the thermophilic oxic process. The compositions of coagulated algae were 83.5% of water content, 24.6% of ash, 32% of organic carbon with in total solid, respectively. In present study, food waste oil was used for the increment of calorie of mixtures in order to accelate the microbial activity. As a result, the maximum temperature of mixtures was higher than $50^{\circ}C$ when the mixing ratio of food oil was over 10%. However the temperature indicated the lower than $50^{\circ}C$ when conditions of no mixing with waste food oil, and 5% of mixing ratio. Therefore, the optimum condition was 10% of the mixing ration at $217l{\cdot}m^{-3}{\cdot}min^{-1}$ of air supply rate. The conversion efficiency of carbon was highest as 92% at the optimum condition. And then water was evaluated from imxture without accumulation at 10% of mixing ratio. The thermophilic oxic process well conducted that is good process for the treatment of waste algae without effluents however it has to consider the retreatment of accumulated aluminum in the reactor.

• Journal of Korean Society of Water and Wastewater
• /
• v.24 no.2
• /
• pp.203-210
• /
• 2010

The signification of calorie/water (C/W) ratio was investigated in the treatment of highly concentrated organic wastes by thermophilic oxic process (TOP). Swine waste was used in this study. When C/W ratio was 1.6, most of swine waste was decomposed and all water was evaporated in the 24-h injection cycle. To improve treatment efficiency of TOP treating swine waste, the effect of shortening the swine waste injection cycle was examined. The shortening of injection cycle was conducted to stimulate the activity of thermophilic bacteria. A high temperature in the reactor was maintained by shortening of the injection cycle. When the swine waste injection cycle was shortened, the C/W ratio was fixed at 1.6. As a result, by shortening the swine waste injection cycle from 24-h to 12 and 6-h, the maximum loading rate of swine waste per day could be improved 1.9 and 3.5 times, respectively.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.7 no.2
• /
• pp.57-64
• /
• 1999

The purpose of this study is to establish effective conditions for controlling $CH_4$, $N_2O$ emission from organic Waste / wastewater treatment processes. Continuous and batch experiments were conducted to treat the micro algae from polluted and eutrophicated lakes through the thermophilic oxic process. The microalgae used were mainly Microcystis sp.(collected from eutrophic lake) and Chlorella sp. (cultured in laboratory) Wasted cooking oil was added by aid-heating source. Physico-chemical components of sludges and microalgae were analyzed. In batch experiments, air supply was changed from 50ml/min to 150ml/min. The temperature. water content and drained water were affected by the air flow rate at initial stage. However, there was almost no influence of air flow rate on them in middle and last stages. At air flow rate of 100ml/min, the degradation rate of organic material was higher than that at other air flow rates. $CO_2$ concentration in exhaust was proportional to the strength of aeration, especially at initial stage when degradation was active. $CH_4$ with low concentration was detected only at starting stage when air diffusion was not enough. $N_2O$ production was not affected by variation of air supply. In continuous experiments no matter what the dewatering methods (with PAC and without PAC) and media (wood chip and reed chip) were changed, $N_2O$ was almost not affected by variation of injected air. Result showed that the reed chips using for lake purification could be used as media for thermophilic oxic process in lake and marshes area. $CO_2$ concentration was not so much affected by the change of dewatering methods and media types. $CH_4$ was not detected in the experimental period. So it can be shown that the thermophilic oxic process had been well operated in wide handling conditions regardless of media and dewatering methods.

• Microbiology and Biotechnology Letters
• /
• v.25 no.6
• /
• pp.623-629
• /
• 1997

The studies of isolation and physiological characteristics of mesophilic or thermophilic bacteria from thermophilic oxic process (TOP) treating Chinese restaurant wastes were conducted. Chinese restaurant wastes were consist of moisture; 75.8%, solids; 24.2% and ash; 0.49%. The volatile solid was about 99% of total dry solids. In wastes used in this experiment, there was content of crude protein; 4.47%, crude lipid; 3.56%, free sugar, 0.4% , crude starch; 10.34% and crude fiber 3.14%, respectively. And then it has about 4,970 kcal/kg-dry solid of Chinese restaurant wastes. From TOP treating the chinese restaurant wastes, 37 strains of mesophilic or thermophilic bacteria were primarily isolated using medium used for the isolation and among them 6 strains of thermophilic and 7 strains of mesophilic bacteria were selected by testing the activities of amylase, cellulase, protease and lipase. TB-1, TB-9 as thermophilic bacteria and MB-15-1, 15-2, MB23 as mesophilic bacteria having strong enzyme activity were selected among isolated strains. All selected strains reduced nitrate to nitrite and they utilized glucose, manose, manitol, and maltose as carbon source. From these MB15-2 was identified as Bacillus cereus, TB1, Bacillus licheniformis and TB9; Bacillus schlegelii.

• Journal of Welding and Joining
• /
• v.13 no.2
• /
• pp.12-24
• /
• 1995

Recently, more researches have been actively performed for the assessment of material degradation and residual-life of elevated temperature plant components, as some of domestic fossil power plants become older than 30 years. In this paper, results of on_site residual life assessment are reported for main steam pipes of Youngwol power station #2 which have operated since 1965. For critical weld locations such as butt welds branch welds, Y_sections and a T-section, replication technique and hardness measurement technique were employed for life_assessment. When cracks were detected by conventional NDT tests, crack growth life was calculated using a computer code. On the other hand, for matrix of pipes, residual life was quantitatively estimated by an analytic method and material degradation was estimated qualitatively using diameter measurement data and grain-boundary etching method. Also, direction in further improvement of on-site life assessment techniques are proposed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.21 no.3
• /
• pp.43-52
• /
• 2013

In this study, various influent sludge pre-treatment methods were adopted to investigate their effects on the sludge digestion and methane production in combined mesophilic anaerobic and thermophilic aerobic sludge digestion process. A lab-scale sewage sludge digestion process was operated during 4 phases using different feed sludge pre-treatment strategies. In phase 1, feed sludge was supplied without any pre-treatment. In contrast, in phases 2, 3 and 4, thermal, thermal-alkaline and long time alkaline treatment (7 days) were applied to influent sludge, respectively. With sludge pre-treatment, TCOD removal was drastically increased from 44% to 76% from phases 1 to 4, respectively. Also, pre-treatment of feed sludge significantly improved the methane production rate of MAD, showing an increment from 101 to 165-256mL/L/day. Meanwhile, TCOD removal and methane production at phase 4 were not increased, compared to those at phase 3. Based on the experimental results, it was concluded that pre-treatment of feed sludge significantly increases the efficiency of sludge digestion and thermal-alkaline method was the most effective method among the pre-treatment methods examined.

• Plant Journal
• /
• v.18 no.3
• /
• pp.52-61
• /
• 2022

This study tested the effect of de-NOx Facility operating condition on Nox emisiion in a 125 MW wood pellet power plant in Yeongdong Eco Power Plant Unit 1, which is in operation. As SNCR urea flow rate increased, NOx emission gradually decreased, but ammonia slip after SCR increased. The boiler under test has a structure that is unfavorable to SNCR operation due to the high internal temperature, and the optimum location of the nozzle will be required. SCR dilution air temperature change did not affect the amount of NOx generated. Increasing SCR ammonia flow reduced the NOx emission at SCR outlet and also increased the NOx removal efficiency. However, the ammonia flow rate of 111 kg/h, which does not exceed the ammonia slip its own reference limit, is estimated to be the maximum operating standard. The increase in SCR mixer pressure reduced NOx emission and the removal efficiency was also measured to be the most effective variable to inhibit NOx production.