• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.13 no.2
• /
• pp.83-87
• /
• 2003

$(Nd/Y)_{1.8}Ba_{}2.4Cu_{3.4}O_{7-x}$high $T_c$ superconductor was directionally grown by floating Bone melt growth process with a large temperature gradient in air. Cylindrical green rods of (Nd/Y)1.8 oxides were fabricated by cold isostatic pressing (CIP) method using rubber mold. Microstructures were observed by SEM and TEM and superconducting properties were measured by a SQUID magnetometer. Nonsuperconducting $(Nd/Y)_2BaCuO_5$ inclusions were uniformly distributed within the superconducting $(Nd/Y)Ba_2Cu_3O_x$ matrix. The directionally melt-textured (Nd/Y) 1.8 superconductor showed an onset Tc $\geq$ 90 K and a sharp superconducting transition.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.4
• /
• pp.328-332
• /
• 2007

A superconducting magnetic energy storage (SMES) system has shorter response time and longer life time, and is more economical, and environment-friendly than other uninterruptible power supply (UPS). A conduction cooling system is well answer for the high temperature superconductor (HTS) SMES system. Because the conduction cooling system is simple, light and small structure. The purpose of this paper is to design and verify the effective conduction cooling system for the HTS SMES system. The analysis of heat loads in cryostat is performed. Thermal shield heat loads, temperatures of HTS coil surface and conduction Cu plate are estimated and measured.

• Proceedings of the KSME Conference
• /
• 2000.11b
• /
• pp.186-191
• /
• 2000

Stability of a Bi-2223/Ag tape was studied by using a numerical method. A numerical modeling has been developed to analyze the dynamic evolution of normal zone in a composite tape Bi-2223/Ag. In this paper, the stability of HTS tape is studied by considering the non-uniform temperature distribution in a cross-sectional area. The finite-difference method(FDM) is used to solve the two-dimensional heat conduction equation. Two kinds of analyses are compared to quantify the critical disturbance energy fur quenching HTS tapes. One is the length-thickness(x-y) side and the other is the length-width(x-z) side. The results of analyses shows that the critical disturbance energies for each cases seem to be very close for considered Bi-2223/Ag tape.

• Electrical & Electronic Materials
• /
• v.5 no.3
• /
• pp.271-277
• /
• 1992

X-선 회절 분석 및 적외선 투과율 측정은 실온에서 수행되었다. 또한 $Y_{1-x}$Nd$_{x}$Ba$_{2}$Cu$_{3}$O$_{7-y}$고온초전도체의 자기 임계전류밀도와 저항은 각각 30K와 80-140K 범위의 온도에서 조사되었다. 시료들은 고상 반응법에 의해서 제조되었다. 시료들의 결정구조는 X-선 회절무늬로 부터 모두 직방정계임이 판명되었다. 한편 x의 양이 증가함에 따라서 전이온도 T$_{c}$는 88K 근처의 값을 가지며 x의 양이 증가함에 따라 약간 감소하였다. 적외선 투과율 측정에서 날카로운 peak들은 472.23-618.87$cm^{-1}$ / 범위에 있었다. 이것은 특이할 정도로의 low-lying plasmalike edge와 낮은 에너지의 전자적인 여기가 존재함을 나타내는 것이다. 자기임계 전류밀도는 $10^{2}$~$10^{3}$A/$cm^{2}$ 범위에 있었다.있었다.

• Korean Journal of Materials Research
• /
• v.4 no.7
• /
• pp.828-836
• /
• 1994

In order to investigate the high temperature deformation characteristics in YBaiCu307-, oxide superconductor, the compression test was performed at temperatures from $890^{\circ}C$ to $930^{\circ}C$ at initial strain rate between $1.0 x 10^{-5}s^{-1}\; and \; 1.0^{-4}s^{-1}$. As the temperature increased and the initial strain rate decreased, the flow stress decreased. The strain rate sensitivity exponent measured as 0.41-0.46, supporting occurence of a superplastic deformation. The activation energy for superplastic deformation was calculated as 500-580KJ/mol, which decreased with increasing Ag content. Microstructure of the superplastically-deformed specimens showed that a grain growth occurred during deformation, and it appeared to be considerable when Ag content increased, but most grains still remained equiaxed after deformation. In this study, the deformation mechanism of YBCO superconductor was the grain boundary sliding with the diffusional accommodation and the contribution of the gram boundary sliding to the total strain was estimated to be 65%.

• Korean Journal of Materials Research
• /
• v.4 no.1
• /
• pp.37-43
• /
• 1994

Y-Ra-Cu-0 oxide superconductors were fabricated by the sinter-forging method to make the critical current density improve through controlling of microstructure and crystal texture. The grain alignment of oxide superconductor was formed by the sinter-forging process and it's c-axis orientation was parallel to the press direction.The orientation factor of texture increased with sinking temperature and pressure, and also grain alignment was improved by the addition of Ag. As for the sinterforged Y-Ba-Cu-O/Ag sample, the $T_c$(on-set) was not almost varied with the sinter-forging temperature, but $T_c\;^{zero}$ decreased more or less at high sinter-forging temperatures. In addition, it was observed that added-Ag was mainly distributed along the grain boundar~es in the (123) matrix, resulting in the densification of microstructure. From these results, i t was thought that the improvement of $J_c$ over 2000A/$\textrm{cm}^2$ was attributed to the texture, densification of microstructure, and (123) grain growth due to the Ag addition.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.844-845
• /
• 2008

고온초전도체를 코일형태로 제작할 경우 코일사이 접합저항의 크기는 운전전류 및 전체시스템의 안정도를 결정할 때 중요한 부분을 차지한다. 특히 극저온 냉동기를 이용한 전도냉각 시스템의 경우는 액체냉매를 이용한 냉각시스템보다 더욱 중요하게 접합저항에 의한 열손실이 고려 되어야한다. 현재 저자들은 전도냉각형 2T 마그네트를 제작하고 있다. 권선에 사용된 도체는 Sumitomo Electric Industries, Ltd(SEI) DI-BSSCO H type이다. 이 도체는 stabilizer가 없는 기계적으로 매우 약한 도체이다. 본 논문에선 stabilizer가 없는 도체로 권선된 코일의 경우 발생 할 수 있는 문제점에 대해 나타내었고 안정된 접합을 위해 고려되어야 할 사항에 대해 논의하고자한다.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.760_761
• /
• 2009

초전도 시스템에서 전류를 공급하는 역할을 하는 전류리드는 없어서는 안 될 핵심 부품이다. Powder-in-tube(PIT) 법으로 제작한 1세대(1G) 고온초전도 선재보다 열전달특성이 나쁜 2세대(2G) 고온초전도 선재를 이용하여 고온초전도 전류리드를 제작하였다. 사용한 선재는 미국 AMSC사 선재이다. 초전도 자석으로의 열침입을 최소화하기 위해 지지구조물은 GFRP를 사용하였고 금속연결부는 무산소동을 사용하였다. 2G 선재 6가닥을 사용하여 제작한 전류리드는 액체질소 온도에서 I-V 특성을 평가한 결과 약 400 A급 전류리드도 사용 가능하다고 판단되었으며, 열전달 특성을 측정하기 위해 무냉매형 특성평가장치를 사용하였는데, 77 K과 7 K 사이에서 약 50 mW정도 였다. 본 논문에선 2G 고온초전도 선재를 사용하여 제작한 전류리드의 전기적 열적 특성에 대해 논의하고자 한다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2007.06a
• /
• pp.246-247
• /
• 2007

최근 KEPRI-LSIS가 공동 개발한 하이브리드형 초전도 한류기 동작 시, 사고 검출을 담당하는 초전도체의 최적 설계에 적용하기 위하여 Au/YBCO 박막의 ��치 회복 특성을 조사하였다. $600\;V_{rms}$, 3 ms의 사고가 초전도 박막에 인가되었을 때, ��치가 종료된 이후 초전도성을 회복하기 위해 142 ms의 시간이 소요되었다. 또한 인가 시간이 증가함에 따라 소요 시간도 비례하여 증가하여 4 ms 동안 인가되었을 때, ��치 회복 시간은 272 ms로 측정되었다.

• The Science & Technology
• /
• no.5 s.432
• /
• pp.48-51
• /
• 2005