• Journal of the Korean Magnetics Society
• /
• v.9 no.3
• /
• pp.149-153
• /
• 1999

Frequency and temperature dependence of magnetic loss has been investigated in Mn-Zn ferrites containing the sesistive temary compounds of $SiO_2-CaO-V_2O_5$. The Mn-Zn ferrite with the composition of $MnO:ZnO:Fe_2O_3=36:11:53$(by mol %) are prepared by self-propagating high-temperature synthesis. From the results of frequency dependence of core loss, it has been found that the hysteresis loss is dominant at low frequency and the eddy current loss becomes more dominant as the frequency increases. With the addition of resistive compound, the frequency dependence of core loss, it has been found that the hysteresis loss is dominant at low frequency and the eddy current loss becomes more dominant as the frequency increases. With the addition of resistive compound, the frequency region where the hysteresis loss is dominant becomes wide. The core-loss minimum occurs at about 4$0^{\circ}C$ in the specimens with the additive because of the reduction in eddy current loss.

• Korean Journal of Materials Research
• /
• v.2 no.3
• /
• pp.197-201
• /
• 1992

The temperature dependence of the magentic moment was determined for the system of high $T_{c}$ superconductor $Y_{1-X}Sm_{x}Ba_2Cu_3O_{7-y}$ with x=0, 0.2, 0.4, 0, 6, 0.8 and 1.0. Also the magnetic susceptibility and the magnetic critical current density were measured from the magnetic hysterisis loops obtained at 30 K. From the results of the magnetic susceptibility measurements, the high $T_{c}$ phase were ranged from 14.7 to 49.1%. The values of the magnetic critical current densities were in the range of $10^3~10^4A/cm^2$. The penetration depth was approximately ninety times larger than the coherence length.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.8 no.4
• /
• pp.544-549
• /
• 1998

The single crystal of $KMgCl_3$ was grown in Ar atmosphere by Czochralski method for the first time. For the stoichiometric composition, $K_2MgCl_4$ crystal was obtained, and the nonstoichiometric method was used for the $KMgCl_3$ crystal growth. The phase transition sequences of $KMgCl_3$ were investigated by the DTA, DSC and the ferroelastic properties by using the high temperature polarizing microscope and the thermomechanical system. The temperature dependences of the ferroelastic domains and the spontaneous strain obtained from the stress-strain hysteresis loops were analyzed.

• Magazine of the Korea Concrete Institute
• /
• v.10 no.3
• /
• pp.143-152
• /
• 1998

본 연구에서는 콘크리트 강도에 미치는 양생온도의 영향이 양생시점에 따라 어떻게 변하는지에 대한 실험과 기존의 모델식을 이용하여 분석을 수행하였으며, 양생시점의 영향을 고려한 수정된 등가재령식을 제시함으로써 새로운 강도예측식을 개발하기 위한 기초연구이다. 이를 위해 2종류의 물.시멘트비에 대하여 각각 11종류의 양생이력을 고려한 실험을 수행하였다. 실험변수로는 3종류의 양생온도 (5 $^{\circ}C$, 20 $^{\circ}C$, 4$0^{\circ}C$)와 4종류의 양생시점(0~1일. 1~2, 2~3, 6~7일)을 선정하였다. 또 기존의 Saul 및 Arrhenius 모델식을 이용하여 실험결과를 분석하여 양생시점의 영향을 도입한 각각 수정된 등가재령식을 제시하였다. 실험결과에서 초기재령에서 고온 양생한 경우에는 초기에는 높은 강도를 나타내지만 재령이 증가할수록 오히려 낮은 강도를 나타내었다. 또 초기에 저온으로 양생한 콘크리트는 그 반대의 경향을 보였다. 기존의 등가재령식에서는 같은 등가재령에서도 압축강도는 양생시점에 따라 달라짐을 알 수 있었다. 기존의 모델식은 특히 초기재령에서의 강도예측결과가 실험결과와 잘 맞지 않았으나 이 논문에서 제시된 수정된 등가재령식은 실험결과와 잘 일치하는 결과를 보여 주었다.

• Fire Science and Engineering
• /
• v.23 no.5
• /
• pp.17-23
• /
• 2009

Moisture evaporates, when concrete is exposed to fire, not only at concrete surface but also at inside the concrete to adjust the equilibrium and transfer properties of moisture. The equilibrium properties of moisture are described by means of water vapor sorption isotherms, which illustrate the hysteretical behavior of materials. In this paper, the prediction method of the moisture distribution inside the concrete members at fire is presented. Finite element method is employed to facilitate the moisture diffusion analysis for any position of member. And the moisture diffusivity model of high strength concrete by high temperature is proposed. To demonstrate the validity of this numerical procedure, the prediction by the proposed algorithm is compared with the test result of other researcher. The proposed algorithm shows a good agreement with the experimental results including the vaporization effect inside the concrete.

• Journal of Sensor Science and Technology
• /
• v.5 no.6
• /
• pp.60-67
• /
• 1996

The interfacial electrical properties of InSb MIS structure with low temperature remote PECVD $SiO_{2}$ have been characterized. The interlace-state density at mid-bandgap of the MIS structure was about $1{\sim}2{\times}10^{11}\;cm^{-2}eV^{-1}$, when the $SiO_{2}$ film was deposited at $105^{\circ}C$. However, large amount of interlace states and trap states were observed in the MIS structure fabricated at temperatures above $105^{\circ}C$. The time constant of $10^{-4}{\sim}10^{-5}\;sec$ of interface states was extracted from G- V measurement. As the deposition temperature increased, the hysteresis of C- V curves were increased due to the high trap density.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.103-103
• /
• 2000

강한 결정 방향 의존성과 낮은 항정계를 갖는 Bi4Ti3O12 강유전체 박막은 NDRO형 비휘발성 강유전체 메모리 분야에서 매우 유망한 재료이다. 이를 위해서는 실리콘 기판과의 계면조절과 실리콘 기판성에서 고품질의 강유전성 박막을 성장시키는 기술이 필수적이다. MOCVD에 의한 Bi4Ti3O12 의 증착에서는 Bi 성분의 강한 휘발 특성과 낮은 반응성으로 인하여 조성과 두께 등의 조절이 매우 어렵다. 따라서 화학기상증착의 기구를 이해하고 제어하는 기술이 양질의 박막을 얻는데 필수적이다. 본 연구에서는 유기금속 원료 TPB, TIP 과 산소를 이용하여 실리콘 기판위에 Bi4Ti3O12 강유전체 박막을 증착할 때, 증착 변수의 변화에 따른 박막의 증착 거동과 구조적, 전기적 특성을 연계하여 분석하였다. 특히 기판부착력이 낮고 휘발성이 강한 Bi의 특성으로 인한 문제를 개선하기 위하여 TIP원료를 주기적으로 공급, 중단을 반복하는 펄스주입법을 고안하여 그 효과를 살펴보았다. 실리콘 기판위에서 TiO2의 증착속도는 실험온도 영역에서 온도에 따라 변화하지 않는 전형적인 물질 전달에 의해 지배되는 양상을 나타내었다. 반면 Bi2O3 경우에는 50$0^{\circ}C$ 이상에서 급격하게 증착속도가 감소하는 특이한 경향을 나타내었으며 이는 Bi2O3의 높은 휘발성 때문일 것이다. Bi4Ti3O12 박막은 온도증가에 따라 증착속도가 증가한 후 $600^{\circ}C$ 이상에서 포화되는 경향을 보였다. 이로부터 실리콘 기판위에서의 Bi4Ti3O12 박막의 증착 모델을 제시하였다. Bi2O3에 비해 상대적으로 표면 부착력이 월등히 큰 TiO2가 우선적으로 실리콘 펴면에 형성된 후 TPB 유기금속 원료가 이 TiO2와 반응하는 과정으로 Bi4Ti3O12 박막이 증착된다. $600^{\circ}C$이상에서는 증착 변수들을 바꾸어도 물성이 변하지 않는 자기조절기능이 있음을 알 수 있었는데 이는 고온에서의 Bi2O3의 강한 휘발성 때문일 것이다. 실리콘 기판에서 층상 페로브스카이트 상은 58$0^{\circ}C$ 이상에서 형성되며, 매우 좁은 온도 변화에도 결정구조, 박막현상 및 성분이 크게 바뀌는 온도에 민감한 증착거동이 관찰되었다. 증착 모델에서 예견되는 Bi의 불리함을 개선하기 위해 펄스주입법을 실시한 경우 Bi의 성분량이 증가되었고 결정성이 향상되었다. 이로부터 펄스주입법이 박막내에 부족하기 쉬운 Bi를 보충하여 박막의 특성을 개선함을 확인하였다. Bi4Ti3O12 박막의 증착온도에 따른 누설전류 특성 측정 결과 증착온도가 감소할수록 누설전류가 감소함을 알 수 있었고 펄스주입법이 연속주입법보다 더 낮은 누설전류를 보임을 알았다. 펄스주입법의 경우 -2.5V 인가 시의 누설전류는 7.4$\times$10-8A/cm2에서 1.3$\times$10+7A/cm2의 매우 우수한 값을 가졌다. 연속 주입법에 의해 증착된 박막은 C-V 측정 결과 강유전성 이력이 나타나지 않았으나, $600^{\circ}C$ 이상에서 펄스주입법에 의해 증착된 박박은 강유전성 이력을 나타내었다.

• Journal of Sensor Science and Technology
• /
• v.6 no.3
• /
• pp.188-193
• /
• 1997

The lanthanum-modified lead titanate (PLT) thin films on (100) cleaved MgO single crystal substrate have been prepared by RF magnetron sputtering method using PbO-rich target with varing La contents. The substrate temperature, working pressure, $Ar/O_{2}$, and RF power density of PLT thin films were $580^{\circ}C$ 10mTorr, 10/1, and $1.7W/cm^{2}$, respectively. In these conditions, the c-axis growth and tetragonality of the PLT thin films decreased for addition of La content and the PLT thin films showed diffuse phase transition from high temperature XRD patterns. The infrared sensor was fabricated. The remanent polarization was above $1.71{\mu}C/cm^{2}$ and the pyroelectric voltage was above 500mV with 10:1 signal to noise ratio.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.34 no.1
• /
• pp.95-105
• /
• 2014

Reinforced concrete (RC) shield tunnel lining must be designed for fireproof performance because the lining is sometimes exposed to very high temperature due to traffic accidents. Both experimental and numerical studies are carried out to evaluate fire resistance performance of precast RC tunnel lining systems. In the experimental studies, six full-scale precast RC tunnel segments are exposed to fire in order to examine the influence of various parameters on the fire resistance performance of precast RC tunnel lining. We used the temperature curve of the RABT criteria, which are severe conditions of fire temperatures. The fire test showed that the explosive spalling was not observed by substituting concrete to PP fiber reinforced concrete. A transient heat flow analysis was carried out in consideration of the material properties that change with temperature, and the results showed good agreement with the test results.

• KSBB Journal
• /
• v.24 no.6
• /
• pp.563-569
• /
• 2009

Fibroin is an insoluble structural protein from Bombyx mori. It can be solubilized by dissolving in a hot $CaCl_2$ solution and subsequent dialysis. The aqueous solution is unstable and a transition from aqueous fibroin molecules rich in random coil is undergo to one rich in $\beta$-sheet content, resulting in hydrogelation. However, fibroin gel is so fragile and plastic that its mechanical property should be reformed for various applications. In this report, a semi-solid form of fibroin gel was prepared using glycerol and ethanol and was investigated to analyze their flow properties. A fibroin gel with 80% glycerol showed pseudoplastic and thixotropic properties. The square root of its yield stress varied linearly with fibroin concentration and it extrapolated to zero shear stress at 0.2% fibroin. A fibroin gel with 40% ethanol was shown to be highly thixotropic but its shear-thinning behavior was only observed above a certain level of shear rate. Its pseudoplasticity was restored by a high rate of shear stress.