• Title/Summary/Keyword: 고양력장치

Search Result 24, Processing Time 0.032 seconds

Gurney Flap의 전개각에 따른 공력 특성변화 연구

  • Kim, Yeong-Jin;Song, Hyeon-Seon
    • Proceeding of EDISON Challenge
    • /
    • 2016.11a
    • /
    • pp.23-26
    • /
    • 2016
  • Gurney Flap은 자동차의 스포일러 부분에 장착되는 고속주행용 Flap으로써 항공기에는 제한적으로 사용되고 있다. 매우 짧게 설치되는 특성이 있기 때문에 Flap의 길이를 항공기의 기준으로 10%로 증가시켜 Flap으로써의 역할을 확인해 보고자 실험을 진행하였다. Gurney Flap을 장착한 형상 3가지 모두 기본형의 NACA0012형상보다는 양력과 항력이 모두 증가하는 형상을 보였다. 양항비의 경우는 항력의 증가로 인해서 NACA0012에 비해서 모두 감소하는 것으로 나타났다. Gurney Flap은 고양력장치로 사용하기에는 다소 무리가 있지만, Dogfight와 같이 고항력장치를 사용하는 경우에는 좋은 성능을 기대할 수 있다.

  • PDF

Numerical Analysis of Stall Characteristics for Turboprop Aircraft (터보프롭 항공기의 실속 특성 수치해석)

  • Park, Young Min;Chung, Jin Deog
    • Aerospace Engineering and Technology
    • /
    • v.11 no.2
    • /
    • pp.65-72
    • /
    • 2012
  • Numerical simulations were performed to study the stall characteristics of turboprop aircraft. Stall characteristics were qualitatively investigated using the computational results of various configurations based on the combinations of propeller and high lift device. For the analysis of stall characteristics, three-dimensional Navier-Stokes solver with Spalart-Allmaras turbulence model was used and the relative motion between propeller and wing was simulated using sliding mesh technique. For the cruise configurations, major flow separation was occurred at the fuselage/wing fairing and the separation was reduced under propeller slipstream condition. For the high lift device configuration without propeller, major flow separation was occurred at the outboard side of nacelle. With rotating propeller, early stall onset due to low relative velocity and high effective angle of attack was observed on the outboard wing section. Regarding rotating direction of propeller, inboard-down direction was preferred due to the stall delay effect of propeller slipstream.

슬랫에 의한 항공기 주날개 공력특성변화 연구

  • Lee, Yeong-Jun;Kim, Jeong-Hun;Seo, Yeong-Deuk
    • Proceeding of EDISON Challenge
    • /
    • 2015.03a
    • /
    • pp.590-593
    • /
    • 2015
  • 항공기 운항 중에 가장 연료가 많이 소모될 때는 순간 고출력이 필요한 이륙 순간이다. 항공기가 이륙시 보다 적은 연료를 이용하여 효율적인 비행을 위해 고양력 장치를 사용하고 있다. 본 연구에서는 항공기가 이륙 시 사용되는 고양력 발생 장치 중 하나인 Slat을 이용하여 Slat의 각도 변화에 따라 가장 효율적인 공력특성을 찾아보았다. Slat의 각도를 $15^{\circ}$, $20^{\circ}$ $25^{\circ}$, $30^{\circ}$로 변화시켜 보면서 공력 특성 값들을 확인한 결과 Slat이 있는 경우 NACA2415만 있는 경우보다 양력계수가 좋아졌으나 Slat 뒷전의 와류에 의해 항력계수가 약간 증가 하는 모습을 보였다. 본 실험 case 중에서는 Slat 각도가 $30^{\circ}$일 때 Slat 뒷전의 와류가 사라져 가장 우수한 공력 특성을 보였다.

  • PDF

Design of Airfoil with Tab-assisted Flap System for Increasement of Controllability and Stability (조종성과 안정성 증가를 위한 플랩-­탭 익형의 설계)

  • No, Hyeon-Seop;Kim, Seong-Hwan;Park, Hyeon-U;Lee, A-Reum;Son, Chan-Gyu;Lee, Gwan-Jung;O, Se-Jong
    • Proceeding of EDISON Challenge
    • /
    • 2012.04a
    • /
    • pp.13-16
    • /
    • 2012
  • 본 논문에서는 항공기의 제어 안정성(Control Stability)과 조종성(Controllability), 그리고 기계 하중을 줄여 구조와 공기역학적인 안정성을 향상시키기 위해 고양력장치(High-lift Device)인 플랩에 탭이 추가된 익형을 설계하였다. 이 과정에서 한정된 해석자원 때문에 많은 설계조건을 해석하는데 어려움이 있었다. 이를 해결 하기위해 얇은 익형 해석(Thin Airfoil Theory)을 이용하여 지정된 설계구속조건을 통해 시위선을 지정하고 이를 바탕으로 두께를 부여하여 최종적인 익형을 설계하였다. EDISON CFD 2.0 Solver를 이용해 최종 설계한 익형의 성능을 해석하였다. 이를 바탕으로 플랩만 존재하는 익형에 비해 양력손실률이 15%이하로 감소하고, 힌지 모멘트가 최소인 공기역학적 익형을 산출하였다.

  • PDF

Flap Design Optimization for KLA-100 Aircraft in compliance with Airworthiness Certification (인증규정을 고려한 KLA-100항공기 고양력장치 최적화 설계)

  • Park, Jinhwan;Tyan, Maxim;Nguyen, Nhu Van;Kim, Sangho;Lee, Jae-Woo
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.41 no.8
    • /
    • pp.649-656
    • /
    • 2013
  • High-lift devices have a major influence on takeoff, landing and stall performance of an aircraft. Therefore, a slotted flap design optimization process is proposed in this paper to obtain the most effective flap configuration from supported 2D flap configuration. Flap deflection, Gap and Overlap are considered as main contributors to flap lift increment. ANSYS Fluent 13.0.0$^{(R)}$ is used as aerodynamic analysis software that provides accurate solution at given flight conditions. Optimum configuration is obtained by Sequential Quadratic Programing (SQP) algorithm. Performance of the aircraft with optimized flap is estimated using Aircraft Design Synthesis Program (ADSP), the in-house performance analysis code. Obtained parameters such as takeoff, landing distance and stall speed met KAS-VLA airworthiness requirements.

The Analysis of Wind Hole Effect for The Bangpae Kite (방패연의 방구멍 효과에 대한 분석)

  • Kang, Chi-Hang
    • Journal of the Korean Society for Aeronautical & Space Sciences
    • /
    • v.42 no.7
    • /
    • pp.561-566
    • /
    • 2014
  • Our Korean traditional cultural inheritance Bangpae Kite has the stable rectangular shield shape decorated with artistic paint or poem and a good flight performance due to the central wind hole. In this paper, to analyse the wind hole effect to kite performance we performed the wind tunnel testing of the various design factor of kite model and air flow visualization passing through the wind hole. As the result of aerodynamic analysis, we knew that the wind hole of kite displays similar function of slot system for the wing high lift device. This fact demonstrates that our ancestor understood the function of slot system and applied effectively to the development of kite flight performance.

CFD Study on Aerodynamic Characteristics of Frisbee (CFD를 이용한 Frisbee의 공기역학적 특성에 대한 고찰)

  • Kim C. W.;Chang B. H.;Lee J. Y.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2004.10a
    • /
    • pp.101-104
    • /
    • 2004
  • CFD simulation is peformed for 2D and 3D frisbees flying at 10m/s. For convenience of simulation, rotation of 3D model is not considered. CFD results show that pitching moment makes the nose down and holes at the leading and trailing edges improve the lift characteristics of the frisbee.

  • PDF

CFD Study on Aerodynamic Characteristics of Frisbee (II) (CFD를 이용한 Frisbee의 공력 특성에 대한 고찰(II))

  • Kim C. W.;Chang B. H.;Lee J. Y.
    • 한국전산유체공학회:학술대회논문집
    • /
    • 2005.04a
    • /
    • pp.114-118
    • /
    • 2005
  • CFD simulation was peformed for 2D and 3D flying and rotating frisbees. Multiple reference method(MRF) was utilized to consider the rotation of 3D model. Geometry change of 2D model shows dramatic increase of lift, but 3D simulation results for geometry change show decrease of lift and drag. Ground effect increases the lift of the frisbee being close to ground.

  • PDF

On the Lift Enhancement Technique of the Trailing Edge Rotor of Two Dimensional Hydrofoil (날개 끝 회전자를 이용한 양력강화기법에 관한 연구)

  • Oh, Jung-Keun;Noh, Jackyou
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.21 no.2
    • /
    • pp.200-206
    • /
    • 2015
  • In order to verify the lift enhancement of the 2D hydrofoil with trailing edge rotor and check the ability of its practical use, experimental studies were conducted in the caviation tunnel using the test model with NACA0020 section. The three-component forces acting on the model could be measured by exclusively designed sting type multi-component load cell. The trailing edge of the model has been replaced with rotor which could be controlled by DC servo motor installed at the exterior of the tunnel. A typical effect of the trailing edge rotor has been introduced among the systematic experiments on various angular deviation of the model and the rotational velocity of the trailing edge rotor. It is appeared that the circulation control effect could be easily adjusted by selecting the rotational velocity of the trailing edge rotor and the lift force was augmented more than two times. Thus the proposed lifting device could be utilized as a novel high lifting device which has adjustability of lift force.

Gurney Flap을 응용한 자동차 문 열림 대응장치 연구

  • Jang, Ho-Jun
    • Proceeding of EDISON Challenge
    • /
    • 2016.03a
    • /
    • pp.619-621
    • /
    • 2016
  • 자동차 주행 중 차 문이 열리는 경우에 운전자가 조향을 유지하는 채로 대응하기란 쉽지 않고, 이것이 방치될 경우 대형사고로 이어질 가능성이 생긴다. 따라서 이를 기계적 또는 역학적으로 해결해야 할 필요성이 있으며, 본 연구에서는 고양력 장치중의 하나인 gurney flap을 응용하여 항력 발생장치로 이용함으로써 자동차 문이 더 빨리 닫힐 수 있는지에 대한 연구를 진행하였다. 해석 결과, 문 모서리에 flap, 특히 판형 flap을 장착하였을 때, 그렇지 않았을 때보다 2배에 가까운 항력상승 효과가 나타남을 확인하였다.

  • PDF