• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.10
• /
• pp.1026-1031
• /
• 2008

This paper describes the establishment result of high speed data receiving and archiving system(HDRAS) using data receiving card(DRC) developped by SaTReC and low cost RAID(Redundant Array of Independent Disks) storage instead of expensive enterprise RAID storage. We used three S-ATA2 type hard disks and performance test program developped by SaTReC to receive and save data at 350Mbps. Finally, we verified that the HDRAS using low cost RAID storage has a capacity to process received data at 79MB/s(632Mbps).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.816-823
• /
• 2008

This paper describes the test results of developed high speed data processing unit using Xilinx GTP(Multi-Gigabit-Transceiver) interface and DDR-2 memory. The high speed data processing unit receives input data from packet generator at 1.25Gbps and transmits stored data to the data receiving system at 700Mbps. Therefore, DDR-2 memory controller and Xilinx GTP interface are implemented by FPGA instead of CPU to process high speed data directly.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.30-31
• /
• 2020

일반적으로 CCTV 녹화기는 24시간 중단없이 다중 카메라로 부터 수신되는 Video, Audio, Meta 데이터를 파일형태로 저장한다. 그리고 다양한 IoT 센서들은 사건(event)이 발생되었을 때, 입력되는 데이터를 기록한다. 그런데 이 형태의 데이터를 통합하여 사용하는 서비스들에 대한 요구가 증대되고 있다. 그런데 영상데이터와 IoT센서 데이터를 분리해 저장하고 관리하는 기존의 방식으로는 사용 센서의 개수 등에 따라 물리적인 크기가 커지고 관리의 복잡성이 커지는 문제가 발생한다. 본 논문에서는 다중 카메라로부터 입력되는 동영상 데이터와 IoT 센서 데이터를 통합하여 저장하는 방안을 제시한다. 이러한 통합 데이터의 고속 입출력을 지원하기 위해, 본 연구에서는 자체 파일시스템을 개발하였고 저장되는 각각의 파일을 mp4 표준을 따르게 하여 호환성을 보장하도록 구현하였다. 그래서 동영상 파일 포맷으로 널리 사용되는 MP4 포맷에 IoT센서 데이터를 함께 저장함으로써 동영상과 IoT센서의 정보를 효율적으로 관리하고 검색의 편의성을 높일 수 있게 되었다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2010.07a
• /
• pp.287-290
• /
• 2010

최근 기기간의 접속에 적합한 근거리 무선 접속기술의 요구가 증대됨에 따라, 그 요구에 대응하는 무선통신기술의 하나로 UWB(Ultra Wide Band)가 주목을 받고 있다. 특히, TV와 캠코더, 카메라 등의 AV기기 상호 간의 무선접속을 포함하여 PC나 휴대정보단말(PDA) 등이 네트워크에 무선으로 접속하는데 UWB 기술은 주요한 역할을 담당할 것으로 예상된다. 최근 서비스가 진행되고 있는 HDTV를 비롯하여 향후 UHDTV(Ultra-HDTV) 등의 방송시스템이 본격화되면 HD급 이상의 캠코더는 고해상도에 따른 대용량 데이터를 저장하고 AV기기 간의 데이터 전송을 위해 고속 무선 데이터 전송이 필수적이다. 또한 이와 같은 고속 무선데이터 전송을 위해서는 보다 안정된 송수신 기술이 절대적으로 필요하다. 이를 위하여 본 논문에서는 차세대 UWB의 설계 제약조건 중 하나인 저전력 송신환경에서 수신 신뢰도의 향상을 이루기 위해 LDPC code를 오류정정부호로 고려하고, 제한된 반복복호 횟수를 가지고 개선된 성능을 얻기 위해 새로운 복호 알고리즘을 제안하였다. 또한, 제안한 복호 알고리즘에 대해 모의실험을 통하여 성능을 검증함으로써 차세대 UWB 송수신 기술로서의 유용성과 적용 가능성을 제시하였다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.12 no.5
• /
• pp.817-828
• /
• 2017

It is very hard to find the system which processes single 10Gbps stream, and the related application is also rare. But in the field of science such as physics and astronomy, these high speed systems have been widely used and now more upgraded performance is expected. For this reason, high speed network based storage which captures and records 10Gbps level of packets was developed for the support of small astronomical company in KASI. But for the use of the system in research, system performance should be not only evaluated but also optimized. In this paper, we first implement system environment for the performance evaluation and discuss the experiment procedure and solution to acquire numerical results.

• Journal of Satellite, Information and Communications
• /
• v.11 no.4
• /
• pp.1-9
• /
• 2016

This paper was studied in two ways with respect to the information received from the video signal separation technique of PPI Scop radar device. The proposed technique consists in generating an image signal through the video signal separation and synthesis, symbol generation, the residual image signal generation process. This technology can greatly improve the operating convenience with improved ease of discrimination, screen readability for the operator in analyzing radar information. The first proposed method was constructed for high-speed FPGA-based information processing systems for high speed operation stability of the system. The second proposed method was implemented intelligent algorithms and a software algorithm function curve associated resources.This was required to meet the constraints on the radar information, analysis system. Existing radar systems have not the frame data analysis unit image. However, this study was designed to image data stored in the frame-by-frame analysis of radar images with express information MPEG4 video. Key research content is to highlight the key observations expresses the target, the object-specific monitoring information to the positive image processing algorithm and the function curve delays. For high-definition video, high-speed to implement data analysis and expressing a variety of information was applied to the ARM Processor Support in Pro ASIC3.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.1
• /
• pp.40-47
• /
• 2009

This paper presents the method of measuring the feedback interference channel, which is developed between the transmit and receive antennas of a wireless repeater by receiving the transmit signal at the receive antenna of the identical repeater, and experiment results obtained by analyzing the measurements. This experiment uses 2 GHz WCDMA signal and is carried out near a highway. The high-speed mobiles on highways cause reflected signals with high Doppler frequencies and large energy. In order to characterize the feedback channel, the power delay profile and the scattering function are estimated by identifying the delay spread, the Doppler spread, the number of fingers, and the attenuation with delay. Since the feedback interference channel is constructed between the fixed TX and RX antennas, which is dependent upon the multipaths developed by moving or fixed objects around the antennas, the channel shows different properties comparing to the conventional channels between the base station and the mobile station. Therefore, the results presented in the paper are expected to provide guidelines for designing and evaluating wireless repeater systems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.41 no.2
• /
• pp.163-171
• /
• 2016

In order to detect the exact position of high-speed train, it is necessary to obtain location information from the transponder tag installed along the track. In this paper, we proposed parallel descrambling scheme for high-speed railway transponder system, which aims for reducing the processing time required to decode telegram. Since a telegram is stored in a tag after information bits are scrambled by an encoder, decoding procedure includes descrambling of received telegram to recover the original information bits. By analyzing the structure of the descrambling shift register circuit, we proposed a parallel descrambling scheme for fast decoding of telegram. By comparing the required number of clocks, it is shown that the proposed scheme significantly outperforms the original one.

• Journal of Broadcast Engineering
• /
• v.16 no.2
• /
• pp.350-359
• /
• 2011

Fast developments of broadcasting technologies since 1990s enabled not only High Definition Television service providing high quality audiovisual contents at home but also mobile broadcasting service providing audiovisual contents to high speed moving vehicle. Terrestrial Digital Multimedia Broadcasting (T-DMB) is one of the technologies developed for mobile broadcasting service, which has been successfully commercialized. One of the major technical breakthroughs achieved by T-DMB in addition to robust vehicular reception is an adoption of framework based on MPEG-4 System. It naturally enables integrated interactive data services by using Binary Format for Scene (BIFS) technology for scene description and representation of graphics object and Object Descriptor Framework representing multimedia service components as objects. T-DMB interactive data service has two fundamental limitations. Firstly, graphic data for interactive service should be always overlaid on top of a video not to be rendered out of it. Secondly, data for interactive service is only received by broadcasting channel. These limitations were considered as general in broadcasting systems. However, they are being considered as hard limitations for personalized data services using location information and user characteristics which are becoming widely used for data services of smart devices in these days. In this paper, the architecture of T-DMB hybrid data service is proposed which is utilizing broadcasting network, wireless internet and local storage for delivering BIFS data to overcome these limitations. This paper also presents hybrid BIFS technology to implement T-DMB hybrid data service while maintaining backward compatibility with legacy T-DMB players.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.6C
• /
• pp.601-609
• /
• 2002

The efficient Viterbi decoder that supports full data-rate output of DAB system was proposed. Viterbi decoder consumes lots of computational load and should be designed to be fast specific hardware. In this paper, SST scheme was adopted for Viterbi decoder with puncturing to reduced the power consumption. Puncturing vector tables are modified and re-arranged to be designed by a hardwired logic to save the system area. New re-scaling scheme which uses the fact that the difference of the maximum and minimum of the path metric values is bounded is proposed. The proposed re-scaling scheme optimizes the wordlength of path metric memory and greatly reduces the computational load for re-scaling by controlling MSB of path metric memory. Another saving of computation is done by proposed algorithm for branch metric calculation, which makes use of pre-calculated metric values. The designed Viterbi decoder was synthesized using SAMSUNG 0.35$\mu$ standard cell library and occupied small area and showed lower power consumption.