• 소성∙가공
• /
• 제16권5호통권95호
• /
• pp.348-353
• /
• 2007

The propagation of a macro-scale crack and the accompanying transformation zone around it was visualized in an Y-TZP ceramic using a mechano-luminescence (ML) technique. The technique allows realistic fractures that take place catastrophically in actual applications to be realistically stimulated. Unlike conventional quasi-static R-curves, the ML technique on a relatively fast time frame permitted a so-called quasi-dynamic R-curve in the crack speed range from 50 to 140 m/sec. to be measured. Effective toughening then commenced and the applied stress intensity factor increased to 27 $MPa{\sqrt{m}}$. The transformation zone height obtained from the ML observations was in good agreement with that predicted by the Marshall model, and coincided with previously observed results for quasi-static conditions by Raman spectorscopy and x-ray analysis.

• 한국기계가공학회지
• /
• 제12권5호
• /
• pp.116-121
• /
• 2013

A high speed deburring machine was developed based on the analysis of magnetic contact force, forced vibration, stiffness and deformation of the structure. After 3 dimensional CATIA modelling, the stiffness and the deformation properties of the deburring machine in static and dynamic condition using finite element method were analyzed. Both static and dynamic simulation results showed that designed high speed deburring machine was well satisfied the stability properties at the operating condition. we have performance test program for the real system to evaluate the simulation results.

• 광학세계
• /
• 통권100호
• /
• pp.26-29
• /
• 2005

레이저 가공기 세계시장은 2010년에 약 70억 달러 이상의 규모가 예상되고 고출력 CW 고체 레이저 시장은 2010년까지 매년 약 30%의 성장이, 펄스레이저 시스템 및 레이저마킹기 시장는 연간 10% 이상의 성장을 예상하고 있다. 반면, 세계 레이저 발진기의 시장에서 CO2 레이저의 경우 시장의 규모가 작아져서 2004년에 약 4억 달러의 규모가 2010년에는 약 2.3억 달러 수준으로 하향할 것으로 예상되고 있다. 고체 레이저에서 특기할 사항은 2010년에 Lamp Pumped CW Nd;YAG 레이저의 경우 약 74백만 달러로 규모가 축소됨에 비해 고출력 DPSSL(Diode Pumped Solid State laser) 시장규모는 약 17억 달러로 급성장하며 레이저 마킹 및 미세 정밀 가공용 저출력 DPSSL의 시장 규모가 약 13억 달러로 고속 성장할 것으로 예측이 된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1992년도 추계학술대회 논문집
• /
• pp.17-21
• /
• 1992

최근 들어 공작기계 자동화의 보편화로 절삭가공작업은 고속화, 정밀화되고 있어 생산성을 높이고 있다. 하지만 이러한 생산성의 증가는 단위시간당 chip생산량을 증가시켰으며, 이에 따라 효율적이면서 바람직한 chip처리가 생산성 향상과 연관되어 매우 중요한 문제로 대두되었다. 본 연구에서는 부착장애형 chip breaker를 설치한 insert 공구를 이용, 피삭재로서 내식성, 내마모성을 기계적 성질이 우수하여 근래 산업의 여러 분야에서 각광받고 있는 난삭재 STS304를 절삭하였다. 난삭재 STS304연질금속으로서, 자유표면이 다소 매끄러운 일반재료와 달리 chip의 단면이 어느 정도 규칙적인 톱니형 chip을 발생한다. 그러므로 부착장애형 chip breaker의 각 및 거리, 기타 각 조건을 이용하여 STS304를 절삭특성 및 chip 조절상태를 관찰하고, 기존의 실험에서 자주 이용되었던 연강과 STS304의 비교절삭을 행하여 chip형태등을 비교하여 보는 것도 난삭재의 절삭가공기술 진전에 일조하리라 생각한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.92-96
• /
• 1996

최근 유용한 신소재로많은 광심을 보이고 있는 오스템퍼처리 구상흑연 주철(Austempered Ductile Cast Iron 이하 ADI라 한다) 은 기지조직이 베이나이트와 잔류 오스테나이트로 구성되어있기 때문에 같은 화학 조성을 갖는 일반 구상 흑연 주철에 비하여 연성 및 연성의 감소가 없이 2배 정도의 강도를 증가 시킬수 있기 때문에 자동차, 선박 부품 및 각종 기계부품에 적용시키기 위한 많은 연구가 진행되고 있다. 본 연구에서는 서로 재질의 성분이 다른 고속도강 드릴인 소경드릴을 이용하여 ADI재료를 보통(비관통)이송 및 단계이송 절삭가공시 발생되는 공구의 마멸량과 표면조도와의 관계, 절삭력의 변화에 따른 공구마멸과 공구수명과의 관계를 실험적으로 규명하여 ADI재료 의 보통 및 단계이송절삭시 공구수명에 미치는 제반 절삭특성의 영향에 관해 고찰 하고자 한다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 춘계학술대회 논문집
• /
• pp.889-893
• /
• 1997

In this study the runout of spindle is selected as a parameter through which we could measure the machinability of machine and the quality of products. We experimented the effects of runout on surface roughness in high-speed ball-end milling by cutting HP4M workpiece in various cutting condition. It was founs that sunout makes a directive effects on surface roughness and the frequensy type of runout is more or loss similar with that of surface roughness. So the predcition of surface roughness could be possible through measuring the spindle runout.

• 한국정밀공학회지
• /
• 제17권5호
• /
• pp.186-194
• /
• 2000

The purpose of this study is to investigate the difference in cutting characteristics of cermet, carbide and coated carbide tools in the similar application range via turning test of various conditions. The cermet and carbide tools in the range of ISO P10 grade were developed using optimum compositions with a view to obtaining a high toughness and hardness by PM process. First mechanical properties were characterized on these tools. Experimental results of wear behaviour and resistance to fracturing were presented and discussed in the turning of gray cast iron and alloy steels by cermet, carbide and coated carbide tools. The coated carbide tool shows similar cutting performance compared to the cermet, while the cermet has better combination of wear resistance and toughness of high speed (V=500m/min) cutting in comparison with carbide and coated carbide tools, and also shows a potentiality for cast iron cutting. Fe adhesive behaviour on the tools and surface roughness of workpieces were explained by chemical affinity between tools and workpieces.

• 소성∙가공
• /
• 제16권1호
• /
• pp.15-19
• /
• 2007

This paper presents an integrated machining error compensation method based on captured images of tool deflection shapes in flat end-milling processes. This approach allows us to avoid modeling machining characteristics (cutting forces, tool deflections and machining errors etc.) and accumulating calculation errors induced by several simulations. For this, a high-speed camera captured images of real deformed tool shapes which were cutting under given machining conditions. Using image processes and a machining error model, it is possible to estimate tool deflection in cutting conditions modeled and to compensate for machining errors using an iterative algorithm correcting tool paths. This corrected tool path can effectively reduce machining errors in the flat end-milling process. Experiments are carried out to validate the approaches proposed in this paper. The proposed error compensation method can be effectively implemented in a real machining situation, producing much smaller errors.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 1999년도 추계학술대회 논문집 - 한국공작기계학회
• /
• pp.221-226
• /
• 1999

It can be acquired the high effective productivity through of high speed, precision of machine tools, and then, machine tools will be got a competitive power. Industrially advanced countries already developed that the high speed feed is 50m/min using the high speed ball screw. Also, a lot of problems have happened the feed and servo drive system. It is necessary to study about the character of positioning accuracy, heat generation and high speed/accuracy control for feed/servo drive system of high speed/accuracy. In this study, we make use of high performance vertical machine center with a ball screw of large-scale-lead. Also, we'll apply the high-speed/accuracy control technology in this part of feedforward control, multi-buffering block size, etc. Using the design of the mechanical element and high-speed precision control, the basic design concept can be established.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.34-38
• /
• 2000

The trend of cutting process today goes toward higher precision and higher efficiency. Many thermal/frictional troubles occur in high-speed machining of die and mold steels.In this paper, the thermal characteristics are evaluated in high sped ball end-milling of hardened steel(HRc42). Experimental work is performed on the effect of cutting environments on tool life and cutting temperature. Cutting environments involve dry, wet(20bar), compressed chilly air at -9$^{\circ}C$, compressed chilly air at -35$^{\circ}C$. The measuring technique of cutting temperature using implanted thermocouple is used. The cutting temperature is about 79$0^{\circ}C$, 35$0^{\circ}C$ and 54$0^{\circ}C$ in dry, wet and compressed chilly air at +9$^{\circ}C$, respectively. The tool life for compressed chilly air at -9$^{\circ}C$ is longer than all other cutting environments in experiment.