• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.130-131
• /
• 2009

얼굴 영역 검출은 얼굴 인식, 얼굴 복원 등 산업 및 학술 여러 분야에 걸쳐 사용되는 기술이다. 고속의 얼굴 영역 검출을 위하여 고성능 하드웨어를 사용하거나 고속 알고리즘을 사용하는데, 본 논문에서는 GPU 기반 프로그래밍 기법인 CUDA를 이용하여 고속 얼굴 영역 검출 시스템을 구현하였다. 기존의 얼굴 영역 검출 시스템은 처리 속도의 한계로 인해 고속의 검출이 어려웠을 뿐 아니라 고속으로 동작하도록 하려면 고가의 시스템 부품을 사용하여야 하므로 사용자에게 부담을 안겨주었다. 그러나 nVidia 등 그래픽 칩셋 제조업체들이 속속 내놓고 있는 GPGPU 기술을 이용하여 얼굴 영역 검출 시스템을 구현할 경우 보다 저렴한 가격에 보다 뛰어난 성능을 가질 수 있도록 할 수 있다. 따라서 본 논문에서는 이러한 범용 GPU 사용 기술 중 하나인 nVidia의 CUDA를 이용하여 얼굴 검출 시스템을 구현하였다. 실험 결과 GPU 기반 시스템은 CPU 기반 시스템보다 고속으로 검출이 가능함을 확인하였다. 제안하는 방법은 nVidia 그래픽 카드가 설치된 시스템에서 고속의 감시카메라 서버 등으로 적용이 가능하다.

• Spatial Information Research
• /
• v.19 no.4
• /
• pp.73-79
• /
• 2011

With the recent increase in demand for geo-registered imagery, Mobile Mapping Systems(MMS), which can quickly construct geographic information, has become important. The main part of MMS is the high-precision observation system, which collects geographic information at a certain speed. MMS has a complex data generation process and requires a standard-specific vehicle for its use, limiting its application range. In this paper, lightweight MMS is proposed to overcome its complexity by replacing the time synchronizer with a high-speed camera and by stabilizing motion with MEMS IMU/GPS. The proposed low-cost, portable method is expected to produce of geo-registered imagery efficiently.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.827-829
• /
• 2016

In this paper, in order to achieve the user's convenience in golf putting during practice, to provide a method of tracking the golf ball using a high speed camera. This is recently, it is to analyze so that you can hit a golf putting part of the leisure sport to enjoy a lot of people accurately. The proposed method, the pixel when using a common USB camera is blurred, since the golf ball detection rate is low and using a high-speed camera capable of measuring up to per second 380 frames. First, by using the Hough transform after pretreatment, to detect a golf ball. Movement path by using the information subsequently detected golf ball, calculating the moving distance and angle. The proposed method result of applying, improved travel route detection rate of the golf ball is improved, the accuracy of the moving distance and angle.

• The Optical Journal
• /
• v.13 no.5 s.75
• /
• pp.90-91
• /
• 2001

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.145-147
• /
• 1999

• Proceedings of the KWS Conference
• /
• 1999.05a
• /
• pp.148-149
• /
• 1999

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.45 no.1
• /
• pp.30-35
• /
• 2017

In this study, we measured the natural frequencies of aluminum honeycomb sandwich beams using digital image correlation technique. The vibration images were captured using two high speed digital cameras and the images were converted to displacements by the digital image correlation technique. Displacement data in time domain were tranformed to frequency domain data by fast Fourier transform software. To reduce noise invoked by random exitation, a spectrum averaging technique and Savitsky-Golay digital filter were adopted. A conventional vibration measurement using an accelerometer and a finite element analysis were performed to compare the results by high speed digital camera measurement method. In conclusion, new method using high speed digital cameras and digital image correlation technique can measure the vibration of beam structures and can be applied to bio-structures where sensors cannot be attached.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.9
• /
• pp.1093-1098
• /
• 2013

A single-crystal sapphire is used as a transparent bulletproof window material; however, few studies have investigated the dynamic behavior and fracture properties under high-speed impact. High-speed and high-resolution sequential images are required to study the interaction of the bullet with the brittle ceramic materials. In this study, a device is developed to capture the sequence of high-speed impact/penetration phenomena. This system consists of a speed measurement device, a microprocessor-based camera controller, and multiple CCD cameras. By using a linear array sensor, the speed-measuring device can measure a small (diameter: up to 1 2 mm) and fast (speed: up to Mach 3) bullet. Once a bullet is launched, it passes through the speed measurement device where its time and speed is recorded, and then, the camera controller computes the exact time of arrival to the target during flight. Then, it sends the trigger signal to the cameras and flashes with a specific delay to capture the impact images sequentially. It is almost impossible to capture high-speed images without the estimation of the time of arrival. We were able to capture high-speed images using the new system with precise accuracy.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.6
• /
• pp.79-84
• /
• 2012

An experiment of rapid pressurization-induced crack propagation of solid propellant was conducted by using a windowed test chamber. A pre-cracked specimen of solid propellant is installed in the chamber, and highly compressed nitrogen gas in an accumulator pressurizes the chamber until the chamber pressure reaches set-up pressure to make the chamber depressurization. Pressure-time trace was obtained from the experimental result, and pressurization rate was defined from the trace. In this study, three pressurization rates (64.34, 73.86 and 85.44 MPa/s) are considered, and propagation lengths are measured. Also, a progression of the crack propagation recorded by a high-speed digital camera is presented.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2012.05a
• /
• pp.539-544
• /
• 2012

An experiment of rapid pressurization-induced crack propagation of solid propellant was conducted by using a windowed test chamber. A pre-cracked specimen of solid propellant is installed in the chamber, and highly compressed nitrogen gas in a accumulator pressurizes the chamber until the chamber pressure reaches set-up pressure to make the chamber depressurization. Pressure-time trace was obtained from the experimental result, and pressurization rate was defined from the trace. In this study, three pressurization rates (64.34, 73.86 and 85.44 MPa/s) are considered, and propagation lengths are measured. Also, a progression of the crack propagation recorded by a high-speed digital camera is presented.