• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.9
• /
• pp.1681-1688
• /
• 2017

In this paper, we implemented a high-speed signal processing hardware system for Color Line Scan Camera using FPGA and Nor-Flash. The existing hardware system mainly processed by high-speed DSP based on software and it was a method of detecting defects mainly by RGB individual logic, however we suggested defect detection hardware using RGB-HSL hardware converter, FIFO, HSL Full-Color Defect Decoder and Image Frame Buffer. The defect detection hardware is composed of hardware look-up table in converting RGB to HSL and 4K HSL Full-Color Defect Decoder with high resolution. In addition, we included an image frame for comprehensive image processing based on two dimensional image by line data accumulation instead of local image processing based on line data. As a result, we can apply the implemented system to the grain sorting machine for the sorting of peanuts effectively.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.480-483
• /
• 2018

In this paper, we study the interference canceling and image sensing processing technology of multiple light sources for high speed transmission in CMOS sensor based visible light communication system. To improve transmission capacity in optical camera communications via image sensors, different data must be transmitted simultaneously from each LED. However, multiple LED light source environments for high-speed transmission can cause interference between adjacent LEDs. In this case, since the visible light communication system generally uses intensity modulation, when a plurality of LEDs transmit data at the same time, it is difficult to accurately detect the respective LEDs due to the light scattering interference of the adjacent LEDs. In order to solve this problem, the ON / OFF state of many LEDs of the light source is accurately recognized by using a dual CMOS sensor, and the spectral estimation technique and the pixel image signal processing technique of each LED are proposed. This technique can accurately recognize multiple LED pixels and improve the total average bit error rate and throughput of a MISO-VLC system.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.6
• /
• pp.3672-3679
• /
• 2015

The heat generated by electrical components during train operation was estimated by measuring the wall temperature in a locomotive, as well as the temperature and speed of the air entering from the outside and then returning to the outside. The temperatures of the electrical components and wall surface in a high-speed train were measured using an infrared camera. The heat generated by the electrical components was exhausted to the outside through a duct installed on the ceiling of the high-speed train. Thus, the temperature and speed of this exhaust air were measured, as well as those of the air entering the locomotive from the outside. The temperatures at the surfaces of the electrical components and walls in the locomotive were also measured using an attachment-type temperature sensor. In addition, the measurement results were applied to analyze how the heat characteristics of the electrical components were affected by the train operation.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.05a
• /
• pp.747-750
• /
• 2008

JPEG(Joint Photographic Expert Group)은 손실 압축 기법을 사용하여 데이터 양을 20:1 이상으로 현저히 줄이면서도 원 영상과 거의 유사한 영상을 복원할 수 있도록 해주기 때문에, 요즘 디지털 카메라 및 휴대폰 등 영상을 저장할 매 대부분 Exif(Exchangeable image file format)로 JPEG 압축형식을 널리 사용하고 있다. 본 논문은 JPEG 베이스라인 모드로 압축되어진 영상의 디코딩 단계에서 필요한 비계층형 헤더를 파싱하는 모듈의 기능을 소프트웨어로 모델링하고 VHDL을 이용하여 회로를 합성하고 동작을 검증하였다. 설계 결과 Xilinx xc3s1000 fg676-4 환경에서 154.488MHz의 동작속도를 나타내었고, JPEG 디코더의 고속 데이터 처리에 적응 가능하다.

• Journal of Institute of Control, Robotics and Systems
• /
• v.10 no.2
• /
• pp.178-184
• /
• 2004

In this paper, we designed an image processing system for the high speed line-scan camera which adopts the new memory model we proposed. As a resolution and a data rate of the line-scan camera are becoming higher, the faster image processing systems are needed. But many conventional systems are not sufficient to process the image data from the line-scan camera during a very short time. We designed the memory controller which eliminates the time for transferring image data from the line-scan camera to the main memory with high-speed SRAM and has a dual-port configuration therefore the DSP can access the main memory even though the memory controller are writing the image data. The memory controller is implemented by VHDL and Xilinx SPARTAN-IIE FPGA.

• Journal of the Society of Naval Architects of Korea
• /
• v.49 no.2
• /
• pp.146-150
• /
• 2012

Free vibrations of strings due to initial conditions have been analyzed by the conventional mode summation method, and the nondimensionalized displacements and velocities have been derived in the form of infinite series. The results show wave propagating phenomena and confirmed by experiments using the high speed camera. Other physical characteristics have been discussed and examined with help of waveform solutions.

• Proceedings of the IEEK Conference
• /
• 2003.07c
• /
• pp.2665-2668
• /
• 2003

초고속 인터넷 망의 발전과 함께 네트워크를 통한 전체 시스템의 통합관리 및 감시가 가능해지고 있다. 본 논문에서는 Windows CE 기반의 무선 인터넷 서비스를 이용한 감시 시스템을 구현하였다. 각각의 웨이블릿 인코더를 가진 원격지 카메라를 이용하여 압축한 데이터를 802.11b(Wi-Fi) 무선 랜 망을 사용하여 전송하고, 전송된 9 채널의 영상 데이터를 각 채널별로 웨이블릿 디코더를 이용하여 압축을 풀고, 고속 데이터 버스를 이용하여 동시에 화면에 디스플레이 하였다. 이러한 시스템을 구현하기 위하여 Geode GXl 프로세서 기반의 Windows CE 서버시스템을 구현하였고, FPGA를 이용하여 9 개의 웨이블릿 디코더를 통하여 입력된 영상 데이터를 제어하였고, 실시간 디스플레이가 가능하도록 하였다. 그리고, Windows CE 기반의 PCI 디바이스를 제어하기 위한 디바이스 드라이버 및 응용 소프트웨어를 작성하였다.

• Journal of Power System Engineering
• /
• v.9 no.2
• /
• pp.14-18
• /
• 2005

In this study, the spray characteristics of blended fuels with biodiesel were investigated. The experiments were performed for the effect of mixing ratio and injection pressures on the spray behavior. Conventional diesel fuel and biodiesel fuel and blended fuels were used as test fuels. Through the spray visualization system, composed of a Halogen lamp and High speed camera. The process of spray injection was visualized. Fuel containing biodiesel has different spray pattern on account of the high viscosity and large surface tension. Through this experimental result, we found that, after solenoid driving pulse generates, the increase of injection pressure enables delay time to get shorter, but the increase of mixing ratio makes delay time lengthen.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.1
• /
• pp.1-6
• /
• 2008

A flow visualization is conducted to investigate a flight characteristics of a Coleoptera and an effect of flapping elytra was considered in this study. Also the movements of outer wing(elytra) and inner wing is analyzed using High Speed Camera. As a result of this experiment, in case of flapping insect, three mechanisms to generate lift is confirmed. A small movement of outer wing(elytra) is confirmed and the effect of outer wing(elytra) is estimated.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.7 no.6
• /
• pp.57-64
• /
• 1999

Initial flame development and propagation were visualized under the new ignition system developed to estimate the effects of ignition characteristics on the engine performance in a port injection SI engine. Effects of intake air flow characteristics were also investigated by three different kinds of the swirl control valve. Experiments were performed in an optical single cylinder engine modified form a commercial engine. Flame images were captured through the quartz window mounted in the piston by the high speed video camera and analyzed to compare initial flame development. Results show that IMEP tends to rise slightly as the ignition duration gets longer. The direction of flame propagation is decisively governed by the in-cylinder flow motion. Every flame grows toward the exhaust valve forming a kind of turbulent flame. Initial flame propaagation characteristics are very similar to ones analyzed form pressure data.