• 한국항공우주학회지
• /
• 제47권2호
• /
• pp.98-106
• /
• 2019

인간동력항공기의 날개는 고세장비의 형상을 가지고 있어 큰 굽힘변위가 발생한다. 본 논문에서는 고세장비 형상의 날개가 가지는 구조적인 한계를 붙임각을 변경함으로써 개선하고자 하였다. 날개의 익형 및 단면형상을 고정시킨 후 동일 수준의 양력 발생을 만족시킨다는 전제하에 붙임각의 변경에 따른 날개 끝단의 굽힘변위 변화 경향을 관측하였다. 이를 위해 유한날개의 양력, 항력, 모멘트 하중을 날개의 각 섹션에 분포시켰다. 그리고 EDISON의 "geometrically exact beam (GEB)" 프로그램과 "Variational Asymptotic Beam Sectional Analysis (VABS)" 단면해석 프로그램을 사용하여 변경된 설계안의 구조 안전도를 평가하였다. 또한, 다물체 동역학 해석 프로그램 DYMORE를 이용하여 본 논문에서 예측한 날개의 끝단 변위 예측값을 비교 검증하였다.

• 한국레이저가공학회지
• /
• 제18권2호
• /
• pp.11-13
• /
• 2015

Pressure-drop in a micro-channel is critical when a hole diameter is less then 100um with the high aspect ratio, more than 40. To minimize these pressure loss for micro-channel applications is important and there would be the best hole diameter, taper angle, and their combinations. In this work, the parametric study for laser drilling of anodized material is conducted to obtain the micro-channel hole with high aspect ratio.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1124-1128
• /
• 2008

Thin-wall injection molding is associated with many advantages, including increased portability, the conserving of materials, and the reduction of the molding cycle times. In the application of the thin-wall molding, a considerable reduction of the effective flow thickness results in filling difficulty. High-frequency induction is an efficient way to overcome this filling difficulty by means of heating the mold surface by electromagnetic induction. The present study applies the induction heating to the injection molding of thinwalled micro structures with high aspect ratio. The feasibility of the proposed heating method is investigated through a numerical analysis. The estimated filling characteristics of the micro-features are investigated with variations of mold temperature and part thickness, of which results are also compared with experimental measurements.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 추계학술대회 논문집
• /
• pp.79-82
• /
• 2005

Fresnel lens has number of applications in the optical systems because of its advantages. It is nearly flat lens that has small weight. It is conventionally used in lighthouse beacons, condensing unit of overhead projector and etc. Recently, demands of small size optical systems such as display units, information storage systems, optical detecting units had increased. Conventional manufacturing process of high quality Fresnel lens is direct machining. But it is not suitable for mass production because of high cost and long cycle time. Replication process is more suitable for mass production. But the Fresnel lens has number of sharp blade shape prism. In the replication process, this blade shape causes defects that can affect optical efficiency. In this study, replication process of blade shape pattern that has maximum height of $280{\mu}m$, aspect ratio 1.4 for Fresnel lens application.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2009년도 춘계학술대회 논문집
• /
• pp.84-87
• /
• 2009

This paper describes a novel method for fabricating large area metallic stamp with high aspect ratio micro intaglio features. Micro machined brass master with pillar and larger width groove patterns were electroformed to form inverse structures on the large area metallic stamp. This enabled large area metallic stamp with fine micro high aspect ratio micro intaglio features which were small width groove patterns and quadrilateral hole patterns that cannot be fabricated by direct micro machining process. Fabricated large area metallic stamp with high aspect ratio micro intaglio features was measured and analyzed.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.356-359
• /
• 2007

Continuing improvements in integrated circuit chip density and functionality have mostly contributed toward a very large-scale integrated circuit(VLSI) and display device. In order to test (pass or fail) all of the high integrated semiconductor chip and display device, fine pitch probes are used. Fine pitch probes are manufactured by electroforming process of a Ni alloy in an electrolytic bath. In this paper, we expect that the electric field in bath with the Finite Element Method and applying the FEM result. So, we can obtained the probes that have high aspect ratio of 10 : 1

• 한국수소및신에너지학회논문집
• /
• 제34권1호
• /
• pp.32-37
• /
• 2023

In this study, in order to propose a integrity evaluation for type IV high aspect ratio hydrogen storage vessel, a numerical analysis of the hoop tensile test and pressure test was performed using FEM software, and the results of the actual physical property test were reviewed. The property test and numerical analysis were compared, and very similar results were obtained with deviations of maximum tensile strength of 4.75% and fiber direction stress of 5.39%.

• 대한기계학회논문집A
• /
• 제34권2호
• /
• pp.219-226
• /
• 2010

스탬핑 프로세서는 고생산성과 낮은 가격으로 인해 자동차 차제나 항공기 부품, 그리고 전자제품 등 다양한 장치에 널리 이용된다. 최근에 에너지 산업과 연관되어 연료전지 분리판, 열교환기 등에 사용되는 주름구조를 가지는 박판의 응용이 급속히 증가되고 있다. 그러나 복잡한 형상 때문에 주름구조물을 한번의 성형으로 만들기가 매우 어렵다. 따라서 본 연구에서는 다단성형공정을 이용하여 성형성을 향상시키는 방법을 제안하였다. 1 차 박판성형 후 열처리를 통하여 가공경화 부분을 제거하고 다시 성형하는 방법으로 복잡하고 실용성이 높은 박판구조물 제작이 가능하도록 하였다. 본 연구에서는 제안한 방법을 검증하기 위하여 판형 열교환기에 응용이 가능한 두께 $100{\mu}m$를 가지는 박판주름구조를 제작하고 공정변수를 연구하였다.

• 한국항공우주학회지
• /
• 제41권2호
• /
• pp.127-133
• /
• 2013

본 논문에서는 일체형 복합재 날개 제작에 대한 연구를 수행하였다. 날개는 피벗구조 형태 및 양항비가 큰 고 세장비 구조를 가지고 있다. 날개는 가벼워야할 뿐만 아니라 구조성능 요구조건을 만족하는 충분한 강도 및 강성이 요구되므로 탄소섬유 복합재를 적용하여 설계하였다. 제작비용을 줄이기 위해 구성 부품을 일체형으로 설계하여 구조 부품수를 감소시키고, 오토클레이브를 사용하여 날개를 일체성형으로 제작하였다. 제작공정별 시편시험을 수행하여 재료물성을 확인하였으며, 부분품시험을 통하여 일체성형에 따른 구조성능을 검증하였다.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.156-162
• /
• 2006

Direct fabrication of nano patterns has been studied employing a nano-stereolithography (NSL) process. The needs of nano patterning techniques have been intensively increased for diverse applications for nano/micro-devices; micro-fluidic channels, micro-molds. and other novel micro-objects. For fabrication of high-aspect-ratio (HAR) patterns, a thick spin coating of SU-8 process is generally used in the conventional photolithography, however, additional processes such as pre- and post-baking processes and expansive precise photomasks are inevitably required. In this work, direct fabrication of HAR patterns with a high spatial resolution is tried employing two-photon polymerization in the NSL process. The precision and aspect ratio of patterns can be controlled using process parameters of laser power, exposure time, and numerical aperture of objective lens. It is also feasible to control the aspect ratio of patterns by truncation amounts of patterns, and a layer-by-layer piling up technique is attempted to achieve HAR patterns. Through the fabrication of several patterns using the NSL process, the possibility of effective patterning technique fer various N/MEMS applications has been demonstrated.