• Title/Summary/Keyword: 고성만

Search Result 5,755, Processing Time 0.034 seconds

Characteristic of Long Term Variation of the Water Quality at the Waters of Goseong bay (고성만 수질의 장기변동 특성)

  • Kwon, Jung-No
    • Journal of the Korean Society for Marine Environment & Energy
    • /
    • v.13 no.4
    • /
    • pp.279-287
    • /
    • 2010
  • To identify characteristics of the water quality at Goseong bay, we analyzed long term monitoring data collected at surface and bottom water which was accumulated during the period of 1987~2009. The result showed that the waters of Goseong bay represented mesotrophic level that is based on chlorophyll-a, DIP and DIN and seasonal average of COD that indicates level by the COD criteria. This analysis can be translated that the waters is comparatively clean even though the waters is in the closed bay that slowly diffuses influx mass. We also did the time series analysis, correlation analysis and regression analysis on the moving average of the water parameter at Goseong bay. According to the results, DIP showed a increasing trend as time passed while DIN was on a decreasing trend under the same condition. In the waters of Goseong bay, the phyto-plankton growth was shown to be limited by DIN concentration. The chlrophyll-a was at the peak in August, at $4.60{\mu}g/L$. As the seasonal average and index were the highest in November, it was understood that the balance of nutrient at Goseong bay was dependent more on inner factors, ie, mass farming of aquatic species and release of bottom sediment rather than on inflow of fresh water. Accordingly, it is needed to consider the balance of nutrient like DIP and DIN to manage the water quality or estuaries at Goseong bay.

Distribution and Pollution Status of Organic Matter and Heavy Metals in Surface Sediment Around Goseong Bay, a Shellfish Farming Area, Korea (패류양식해역인 고성만 주변 표층 퇴적물의 유기물과 중금속 분포 및 오염현황)

  • Lee, Garam;Hwang, Dong-Woon;Hwang, Hyunjin;Park, Jung-Hyun;Kim, Hyung-Chul;Kwon, Jung-No
    • Journal of the Korean Society of Marine Environment & Safety
    • /
    • v.23 no.6
    • /
    • pp.699-709
    • /
    • 2017
  • We measured the grain size, total organic carbon (TOC), total nitrogen (TN), and heavy metals (As, Cd, Cr, Cu, Fe, Hg, Mn, Pb, and Zn) in order to understand the spatial distribution and pollution level of organic matter and metals in surface sediment around Goseong Bay, a shellfish farming area, Korea. The surface sediments were composed of finer sediments such as mud and clay. The concentration of TOC, TN, and heavy metals were much higher in the innermost bay than in the mouth and outside of bay. The spatial distribution of organic matter and heavy metals and C/N ratio (5-10) in sediment showed that the organic matter and heavy metals in sediment of the study region were significantly influenced by oceanic origin organic matter and anthropogenic sources, respectively. Based on the results of four assessment techniques (sediment quality guideline, geoaccumulation index, pollution load index, ecological risk index), the sediments around the Goseong Bay were a little polluted for heavy metals and the high metal concentrations in the northern region of bay could adverse impact on benthic organisms in sediment. Thus, the systematic management plan for the improvement of water and sediment environment and the concentrated monitoring of pollutants for sustainable aquaculture and seafood safety around Goseong Bay are necessary in the future.

Study on pretreatment of aramid blended fabric (아라미드 혼방직물의 전처리 조건에 관한 연구)

  • Kim, Jong-Won;Song, Byung-Kab;Hong, Jin-Pyo;Kim, Gyung-Hwan;Han, Sung-Ku;Sung, Sang-Hun
    • Proceedings of the Korean Society of Dyers and Finishers Conference
    • /
    • 2011.03a
    • /
    • pp.109-109
    • /
    • 2011
  • 국내의 섬유산업은 핵심 원천기술의 부족으로 고성능 섬유소재 등 고부가가치 제품의 제조가 취약한 실정이다. 이러한 고성능 섬유제품 산업의 기반이 되는 요소기술인 고성능 소재 생산, 복합화, 염색/후가공, 제품 설계, 디자인 및 제품화 기술 등의 모든 분야에서 선진국 대비 기술 수준이 부족하다. 하지만, 최근 들어 부가가치가 큰 고성능 의복 시장에의 관심이 증대되고 있으며, 국내에서 p-aramid 및 m-aramid 등의 고성능 소재의 양산화 및 활발한 기술개발 등이 이루어지고 있다. 또한 다양한 용도 전개 노력으로 제품화가 이루어지고 있으므로 고성장 가능성이 잠재되어 있는 분야이다. 이처럼 기 개발된 고성능 섬유소재를 이용하여 용도에 따른 제품화로 산재되어 있는 고성능 의류 시장에의 진입 및 선점이 필요하다. 본 연구에서는 고내열 소재인 FR-rayon(100%) 직물과 FR-rayon/m-aramid로 혼방하여 제직된 직물을 이용하여, 동일 전처리 조건에서 조제 투입비를 달리하여 전처리 공정을 진행한 후 침투도,호발성, 인장강도 등을 비교/분석하여 전처리 효과를 확인하였다.

  • PDF

Water Budget Analysis of Agricultural Reservoirs Using Continous Rainfall-runoff Model (연속유출분석모형을 이용한 농업용 저수지 물 수지 분석)

  • Lee, Myung-Jin;Jeong, Woo-Chang
    • Proceedings of the Korea Water Resources Association Conference
    • /
    • 2011.05a
    • /
    • pp.293-293
    • /
    • 2011
  • 고성군의 상수도 보급률은 2008년 기준으로 61%이며, 인근지역인 통영시의 92%에 비하여 매우 낮은 실정이다. 고성군 용수공급 전망을 살펴보면 2014년 일 최대 $25,830m^3$/일의 수요가 예상되나 현재 광역상수도를 전량 수수하는 고성군의 배분량은 $20,500m^3$/일로 $5,330m^3$/일이 부족하여 용수 확보가 필요한 실정이라고 볼 수 있다. 이러한 배경을 바탕으로 본 연구에서는 고성군의 218개소 저수지중 주변의 오염요소가 적은 42개소 저수지 유역에 대해서 강우-유출모형을 모의 수행하였으며, 토양과 관련된 각종 자료와 이를 GIS기법을 이용하여 매개변수를 산정하여, 연속유출분석모형인(NWS-PC)를 통하여 42개 유역의 유입량을 모의 수행하였다. 이러한 산정된 매개변수를 통해 2006년~2009년 동안의 강우량을 토대로 유출모의를 수행하였으며, 2008년 강우량을 토대로 극한 가뭄시의 경우도 모의 수행하였다. 최악의 가뭄시 최저 강우량을 2008년으로 선정하였기에 고성군의 평균유입량은 2,866.8천$m^3$/년으로 나타났다. 1990년~2005년도 평균 농업용수 이용량은 5,879.4천$m^3$/년이며, 2006년~2007년의 평균 농업용수 이용량은 2,186.2천$m^3$/년으로 2005년 이전 농경지 면적이 50%이상 줄어듦에 따라 이용량도 줄었다. 고성군의 평균 식수량은 406.3천$m^3$/년으로 산정되었으며, 고성읍, 하이면, 마암면, 거류면에서 유입량과 농업용수 및 식수량 차이에서 부족한 현상이 나타났으나 고성군 전체 평균으로 봤을 때는 274.3천$m^3$/년의 양이 남는 것으로 나타났다. 본 연구를 통하여 고성군 지역은 대부분의 농촌지역에서 생활용수를 마을상수도나 지하수에 의존하며 생활한다. 고성군 관내 농업용 저수지 중 식수겸용 저수지로 활용함으로써 인근 마을의 생활용수를 공급하게 되면 안정적인 마을상수원확보와 이상기후에 대비한 물 부족 대책을 수립할 수 있으며, 상습가뭄지역의 물 부족 문제가 해결하는데 기초자료로 활용할 수 있다고 판단된다.

  • PDF

A Study on Determinants of High-growth Firms: Focusing on Technology Appraisal Indicators (고성장기업의 결정요인에 관한 연구: 기술평가지표를 중심으로)

  • Kim, Sung-tae;Hong, Jae-bum
    • Journal of Technology Innovation
    • /
    • v.23 no.3
    • /
    • pp.373-396
    • /
    • 2015
  • This study analyzed the determinants of high-growth firms using the technology appraisal data of the Korea Technology Finance Corporation. This study is differentiated from previous studies for three reasons. First, it analyzed the determinants of firms that will grow into high-growth firms in the future, not the characteristics of current high-growth firms. Second, it analyzed high-growth firms by dividing them in two aspects: sales and employment. In other words, they were divided into three types: the case in which a firm achieves high growth in both sales increase and creation of jobs, the case in which a firm achieves high growth in creation of jobs but low growth in sales increase, and the case in which a firm achieves high growth in only sales increase but low growth in creation of jobs. Third, this study applied the technology appraisal indicators of Kibo Technology Rating System(KTRS) by the Korea Technology Finance Corporation as the explanatory variable. As a result of analysis, it was found that a firm achieved high growth in both sales and employment if the position in the technology life cycle was appropriate and the technology readiness level was high. However, it turned out that the management system of technical manpower had conflicting effects on high growth of employment and sales. In other words, a firm that had well managed its technical manpower achieved high growth in terms of employment, but rather showed low growth in terms of sales. This result suggests the inference that firms showing high growth in employment may appear mainly in the high-tech industry where management of technical manpower is important. Accordingly, as a result of adding dummy variables that represent whether or not firms are in the high-tech industry, it was found that the result supported the inference, as firms in the high-tech industry were highly likely to achieve high growth in employment.

An Experimental Study on the Ductility Capacity of Reinforced High Performance Concrete Beams (고성능 철근콘크리트 보의 연성능력에 관한 실험적 연구)

  • 김용부;고만영;오명석
    • Magazine of the Korea Concrete Institute
    • /
    • v.10 no.3
    • /
    • pp.117-124
    • /
    • 1998
  • 본 연구는 고성능 철근콘크리트 보의 연성능력에 관한 실험이다. 실험변수로는인장철근비( )와 하중재하형태(1점가력과 2점가력)가 있다. 콘크리트의 실린더 압축강도가 800-900㎏/㎠, 슬럼프 20∼25㎝ 및 슬럼프 플로우가 60∼70㎝인 고성능 철근콘크리트 보의 휨 실험 결과,고성능 콘크리트는 일반강도 콘크리트보다 취성적인 성질을 나타냈으며, 이러한 성질은 고성능 콘크리트의 연성능력을 감소시켰다. 고성능철근콘크리트의 경우 등가응력블록 변수는 MacGregor블록이나 New Zealand 규준을 사용하는 것이 바람직하다. 또한, 극한 곡률을 구할때는 cu= 0.0042값을 사용하는 것이 타당하다고 사료된다. 고성능 철근콘크리트 보의 경우, 현재 ACI 규준의 철근비에서 허용하는 2 및 4 이상의 연성지수 확보는 각각 '/ 0.30 범위에서 정적하중 상태의 경우 철근비가 - '=0.60 b이하에서 가능하고 휨 부재의 모멘트 재분배를 위한 경우는 철근비를 - '=0.33 b이하로 낮추어야 할 것으로 판단된다.

An Experimental Study on the Quality Performance of Chemical Admixtures for High Strength Concrete - Focussed High Range Water Reducer - (고강도 콘크리트용 혼화제의 품질성능에 관한 실험적 연구 - 고성능 감수제를 중심으로-)

  • 권영호;이보근;박정국;박칠림
    • Magazine of the Korea Concrete Institute
    • /
    • v.5 no.1
    • /
    • pp.165-173
    • /
    • 1993
  • 본 연구는 고강도 콘크리트 실용화의 일환으로 국내에서 시판되고 있는 고성능 감수제의 품질성능을 평가하기 위한 것이다. 이러한 연구를 위하여 8종류의 고성능 감수제를 대상으로 첨가량에 따른 특성을 비교하였다. 또한 경시변화에 따른 특성을 비교, 분석하기 위하여 슬럼프, 공기량 그리고 압축강도비를 측정하였다. 이 때 고성능 감수제의 품질성능 평가 규준는 JASS 5T-402 규준에 따라 실시하였다. 실험결과 국내에서 시판되는 고성능 감수제는 공기량, 앞축강도비에 대해서는 모두 만족하였지만 슬럼프 경시 저하량은 DA를 제외한 모든 고성능 감수제가 규준치를 초과하였다. 따라서 현장에서 고강도콘크리트를 생산할 경우 배합방법이나 첨가방법을 개선하여 시공성을 확보하는 방안이 필요할 것이다.

Relevant Study of Ancient Town Regeneration Construction Based on Theory of Henry Lefebvre -Focused on 'Wu Zhen Ancient Town'- (앙리 르페브르의 이론을 통한 고성구(古城區) 재생구축에 관한 연구 -오진(烏鎭)을 중심으로-)

  • Chen, When-Li;Hong, Kwan-Seon
    • The Journal of the Korea Contents Association
    • /
    • v.18 no.4
    • /
    • pp.388-397
    • /
    • 2018
  • With the continuous expansion and updating of modern cities, the historical and cultural space of ancient city is under increasing impact from the expansion of modern cities. At present, the regeneration and protection of the ancient city has achieved remarkable results together with poor results. Based on this background, this paper has revealed the power operation behind the space production of three regenerated ancient cities with 'spatial practice', 'representation of space' and '"representation of space' as the framework to, and pointed out the influence of stake holders on space shaping and analysis on the construction of regeneration model. From the perspective of specific materials, society, power, and culture, this paper has analyzed the methods of regeneration construction of Wuzhen ancient city, and provided new methods and reference values for how to regenerate and protect ancient cities. Based on these studies and analysis of the regeneration issues in ancient cities and villages, other historical cultural areas, the paper has indicated that it is necessary to coordinate with the government to clarify the issue of property rights, as well as planners and managers, to activate the regional culture and integrate it with modern culture.

Bridge Deck Overlay Technology Using High Performance Concrete (고성능 콘크리트를 활용한 교량 교면포장 기술)

  • Park, Hae-Geun;Won, Jong-Pil
    • Proceedings of the Korea Concrete Institute Conference
    • /
    • 2008.04a
    • /
    • pp.1113-1116
    • /
    • 2008
  • The application of High Performance Concrete (HPC) for protecting bridge deck concrete with micro-silica, fly-ash and ground granulated blast-furnace slag was introduced to North America in the early 1980's. This report introduces the literature reviews of high performance concrete for protecting concrete bridge deck and explains 2-different types of construction methods using this materials. One is high performance concrete overlay method and the other is full depth bridge deck method. Both methods have been successfully applied and demonstrated in north america. Especially, modified high performance concrete overlay method including silica-fume and PVA fiber has been successfully applied in korea also. Therefore, both methods that high performance concrete overlay and full depth bridge deck are considered as reasonable bridge deck protecting methods compared with the conventional bridge deck system using asphalt modified materials.

  • PDF

The Study on the Characteristics of Technology Innovation Activities of High Growth Firms (고성장기업의 기술혁신활동 특성에 대한 연구)

  • KIM, HYEON-CHANG
    • Journal of Korea Technology Innovation Society
    • /
    • v.22 no.1
    • /
    • pp.28-49
    • /
    • 2019
  • This paper explores the characteristics of innovation activities in high growth firms that contribute to national and regional economic growth and job creation. The analysis is based on the 2016 KIS data to analyze the difference in innovation activities between high growth firms and general firms. The main results are as follows: First, high growth firms have a higher proportion of R&D personnel than general firms. Second, high growth firms are actively introducing product innovation, process innovation, and organizational innovation as compared to general firms. In the innovation activities related to product innovation and process innovation, there is no statistically significant difference between high growth companies and general companies except for external R&D. Third, High growth firms are more likely to cooperate with other technology partners than general firms. But, there is no statistically significant difference between high growth firms and general firms in the external knowledge search and the diversity of cooperating partners. Fourth, in terms of protecting innovation, high growth firms are more likely to use all kinds of innovation protection method, such as 'utilizing intellectual property rights', 'maintaining confidentiality', 'adopting complex design methods', 'market preemption ahead of competitors', and the most important means is the intellectual property rights. Fifth, government innovation policies that high growth firms chose as important are 'innovation subsidies and loans', 'acquirement, utilization and protection of intellectual property rights' and 'human resource support'.