• Journal of the Korean Society for Railway
• /
• v.16 no.5
• /
• pp.402-409
• /
• 2013

In metropolitan railway systems, the average commuting time keeps increasing as the scheduled speed increases, and this leads to a decline of rail service usage and competitiveness. Therefore, effective express operation for urban trains is required to improve the scheduled speed. In this study, based on the obtainable time shortening efficiency and economic viability, several express operations are suggested for urban railways and these suggestions are compared by considering high performance trains with acceleration/deceleration and maximum speed improvement. As a result, the optimum express system, which can minimize the cost for sidetrack construction, is suggested.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.969-972
• /
• 2016

In this paper, we propose an algorithm of angular mode selection for high-performance HEVC intra prediction. HEVC intra prediction is used to remove the spatial redundancy. Intra prediction has a total of 35 modes and block size of $64{\times}64$ to $4{\times}4$. Intra prediction has a high amount of calculation and operational time due to performing all 35 modes for each block size for the best cost. The angular mode algorithm proposed has a simple difference between pixels of the original image and the selected angular mode. A decision is made to select one angular mode plus planar mode and DC mode to perform the intra prediction and determine the mode with the best cost. In effect, only three modes are executed compared to the traditional 35 modes. Performance evaluation index used are BD-PSNR and BD-Bitrate. For the proposed algorithm, BD-PSNR results averagely increased by 0.035 and BD-Bitrate decreased by 0.623 relative to the HM-16.9 intra prediction. In addition, the encoding time is decreased by about 6.905%.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.4
• /
• pp.572-580
• /
• 2021

In order to reduce transmission delay and increase reliability in networks, mainly high-performance and high-power network equipment is used to guarantee network quality. In this paper, we propose an optimization algorithm to minimize the energy consumed when transmitting traffic in networks with a bundle link composed of multiple physical cables. The proposed optimization algorithm is a meta-heuristic method, which uses tabu search algorithm. In addition, it is designed to minimize transmission energy by minimizing the cables on the paths of the source and destination nodes for each traffic. In the proposed optimization algorithm, performance evaluation was performed in terms of the number of cables used in the transmission and the link utilization for all traffic on networks, and the performance evaluation result confirmed the superior performance than the previously proposed method.

• Journal of KIISE:Computer Systems and Theory
• /
• v.35 no.9_10
• /
• pp.452-465
• /
• 2008

This paper proposes a light-weight, seamless integrated access control for global e-Science resource sharing. E-Science, based on Grid Computing, was designed to help scientists to remotely control and process the Grid resources such as high-end equipments and remote machines. As many researchers engage in the e-Science Grids, the researchers in a grid often have to wait for or give up use of the Grid resources, even when there are idle resources in other Grids. In this case, provided that proper compensation is given, Grid resource sharing is helpful both for the researchers and the Grids which provide their resources. But, sharing Grid resources globally is not simple, as each e-Science Grid is especially designed for resource sharing in its Virtual Organization(VO) and already has its unique access control policy for its resources. This paper proposes a new integrated access control for e-Science Grid resource sharing. The access control is light-weight without any priori service level agreement(SLA)s among the Grids which share their resources and seamless because the users can use the resources shared as the ones belonging to their Grids without their additional registration to the other Grids.

• The Journal of Korean Association of Computer Education
• /
• v.17 no.2
• /
• pp.97-106
• /
• 2014

There is a lot of interest in the data storage and backup systems according to increasing the data intensive services and related user's data. The overhead of backup performance in massive storage system is a critical issue because the traditional incremental backup strategies causes the time consuming bottleneck in the SAN environment. The SANique Smart Vault system is a high performance backup solution with data de-duplication technology and it guarantees these requirements. In this paper, we describe the architecture of SANique Smart Vault system and illustrate efficient delta incremental backup method based on journaling files. We also present the record-level data de-duplication method in our proposed backup system. The proposed forever incremental backup and data de-duplication algorithms are analyzed and investigated by performance evaluation of other commercial backup solutions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.11
• /
• pp.1087-1093
• /
• 2008

Regenerative cooling passage to guarantee the thermal survivability in high performance rocket engine combustors could have complex configurations of the branching/merging of channels and flow turning, etc. By applying the classical hydraulic coefficients which can be found in the literature according to the flow conditions, hydraulic characteristics in regenerative cooling passages can be obtained effectively through dividing the pressure loss into friction loss and local resistance loss. Satisfactory agreement has been obtained by comparing the present results with experimental measurement of water flow test. In addition, the present results were in good agreement with CFD results when the actual coolant, kerosene was used. Therefore, the application of the present method is expected to be useful to design regeneratively cooled combustors.

• Journal of the Korean Society of Hazard Mitigation
• /
• v.9 no.2
• /
• pp.1-9
• /
• 2009

Water binder ratio combine high-performance concrete shrinkage of less than 0.4 to determine the transformation to a total shrinkage of water to move outside and internal consumption of moisture due to drying shrinkage and autogenous shrinkage, and then, the relative humidity changes and strain to be approached by surface physics describe the relationship between self-desiccation and autogenous shrinkage was set. To verify the self-desiccation in the humidity shrinkage and humidity measurements performed, and the research model, Tazawa, CEB-FIP model than to let the measure and the most similar results in this study based on self-desiccation model, autogenous shrinkage didn't represent the linear shrinkage by the drying shrinkage of the external moving but exponential relationships, unlike with the nature and rapid in the early age properly describes the attributes in shrinkage could see. After this research to move moisture and to reflect the shrinkage model, temperature, moisture transfer, strain analysis by multi-physics model is very similar to the results of mock-up specimen measurements performed for this research, the value measured by the internal consumption of moisture, therefore self-desiccation and a multi-physics model considering autogenous shrinkage might be relevant.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38C no.1
• /
• pp.118-130
• /
• 2013

With the advent of a new services environment based on high-speed mobile networks and high-performance mobile devices, users in real life require content-centric services that provide personalized information conveniently and efficiently. These services are defined as ambient services. To implement and support sustainable ambient services, there is a critical need to conduct research regarding practicable models and methodologies. This paper proposes an effective model for ambient services based on the personalization of real-life space. The model consists of Public Info-space, Universal Info-space and Private Info-space. We also show a methodology for implementing the model with currently available techniques in order to prove that the model and methodology constitute an applicable solution to developing true ambient services. Finally, a kind of role-playing game which is built on a real university campus is presented to show the model to be available, where the test bed infrastructure consists of wireless mesh networks and real-time location systems (RTLSes).

• Journal of the Korean Society of Hazard Mitigation
• /
• v.8 no.2
• /
• pp.23-30
• /
• 2008

UHPC has high performance, high strength and excellent mechanical properties. Moreover UHPC(Ultra High Performance Cementitious Composite) has advantage to reduce cross section under the same load compared with other kinds of concrete. But silica fume which is imported from foreign country has a abundant portion in UHPC mixture in comparison with normal concrete. This is one of the main reason to raise the construction cost. Superior mechanical properties of UHPC due to the optimum filling composition can be changed by replacing the very fine ingredient. The purpose of this research is to grasp the characteristic of UHPC which silica fume and silica flour is replaced with limestone powder. This experiment can be divided into three classes according to the kinds of replacement. The compressive strength and flow of all types were measured and microstructure and hydration phenomena for comparing RPC were analyzed by SEM, XRD, NMR method. As a result, the replacement can be considered to be effective by for the decrease of the UHPC structure construction cost and improvement of the fresh UHPC.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.38-42
• /
• 2008

In the 2000s, the PC package game market has withered, but the internet based on-line game, the wireless internet based mobile game and high-powered console game market have been main stream. Among those markets, mobile game market has rapidly increased because it has 'mobility' that overcomes the limitation of time and area. But, unlike other platforms, mobile game user have to pay the higher price for download mobile game contents through the wireless internet and mobile game developer have to overcome the limitation of storage memory capacity.of mobile phone. Chiefly, the image data consume the storage capacity of mobile game contents, this paper present a technology to optimize image data for mobile game contents through analyzing type of compression method and image formats.