• Title/Summary/Keyword: 고분해능 TEM 이미지

Search Result 3, Processing Time 0.022 seconds

Computer Simulations of HRTEM Images in GaAs/AlAs/InGaAs Epilayers (GaAs/AlAs/InGaAs 에피층의 고분해능 TEM 이미지 전산모사)

  • Lee, Hwack-Joo;Ryu, Hyun;Lee, J.D.;Nahm, Sahn
    • Applied Microscopy
    • /
    • v.26 no.4
    • /
    • pp.479-487
    • /
    • 1996
  • Thin epilayer structures of GaAs/AlAs/InGaAs, grown by Molecular Beam Epitaxy, were investigated by high resolution transmission electron microscopy, Image in the [110] zone axis was taken and compared with the calculated images. The supercell structure which contains GaAs, AlAs and InGaAs layers was designed and was employed in the image calculation with MacTempas computer program. Good agreement was shown between experimental image and a set of calculated images with varying defocus and sample thickness.

  • PDF

Microstructure of Nanocrystalline Electrolytic $MnO_2$ (EMD) (Nanocrystalline Electrolytic $MnO_2$ (EMD)의 미세구조 연구)

  • ;Anqiang He;Arthur H. Heuer
    • Korean Journal of Crystallography
    • /
    • v.14 no.2
    • /
    • pp.79-83
    • /
    • 2003
  • The microstructure of bulk electrolytic MnO₂ (EMD) was studied using x-ray diffraction and transmission electron microscopy (TEM). The bulk sample showed a typical powder x-ray diffraction pattern of EMD materials. TEM study showed that the structure of EMD is present at two length scales;grains, ∼0.2 ㎛ in diameter, and ∼10 nm crystallites within the grain. The electron beam microdiffraction study revealed that each grain is an assemblage of multiphase with a common crystallographic orientation, and_that ∼50% of the crystallites are Ramsdellite, ∼30% are ε-MnO₂, and ∼15% are Pyrolusite. The {1120}peak located at about 67° in powder XRD pattern as well as a high-resolution electron microscope (HREM) image of (0001) plane support the existence of ε-MnO₂ phase.

Fabrication and Device Characteristics of Infrared Photodetector Based on InAs/GaSb Strained-Layer Superlattice (InAs/GaSb 응력초격자를 이용한 적외선검출소자의 제작 및 특성 연구)

  • Kim, J.O.;Shin, H.W.;Choe, J.W.;Lee, S.J.;Kim, C.S.;Noh, S.K.
    • Journal of the Korean Vacuum Society
    • /
    • v.18 no.2
    • /
    • pp.108-115
    • /
    • 2009
  • The superlattice infrared photodetector (SLIP) with an active layer of 8/8-ML InAs/GaSb type-II strained-layer superlattice (SLS) of 150 periods was grown by MBE technique, and the proto-type discrete device was defined with an aperture of $200-{\mu}m$ diameter. The contrast profile of the transmission electron microscope (TEM) image and the satellite peak in the x-ray diffraction (XRD) rocking curve show that the SLS active layer keeps abrupt interfaces with a uniform thickness and a periodic strain. The wavelength and the bias-voltage dependences of responsivity (R) and detectivity ($D^*$) measured by a blackbody radiation source give that the cutoff wavelength is ${\sim}5{\mu}m$, and the maximum Rand $D^*$ ($\lambda=3.25{\mu}m$) are ${\sim}10^3mA/W$ (-0.6 V/13 K) and ${\sim}10^9cm.Hz^{1/2}/W$ (0 V/13 K), respectively. The activation energy of 275 meV analyzed from the temperature dependent responsivity is in good agreement with the energy difference between two SLS subblevels of conduction and valence bands (HH1-C) involving in the photoresponse process.