• Polymer(Korea)
• /
• v.36 no.1
• /
• pp.1-8
• /
• 2012

In this study, we employed hydroxypropyl-${\beta}$-cyclodextrin (HP-${\beta}$-CD) as an excipient to produce poly(lactic-$co$-glycolic acid) (PLGA) fine particles by a supercritical fluid process, called aerosol solvent extraction system (ASES), and investigated the effect of HP-${\beta}$-CD content on the morphology of the particles. The influence of HP-${\beta}$-CD on the drug release characteristics of paclitaxel-loaded PLGA particles was also evaluated. Fine particles were obtained when the HP-${\beta}$-CD content in PLGA/HP-${\beta}$-CD mixtures was greater than 40% and 30%, respectively, for PLGA(75:25) and PLGA(50:50), whereas a film-like precipitate was obtained for lower HP-${\beta}$-CD content. The release rate for paclitaxel loaded PLGA(75:25)/HP-${\beta}$-CD particles was found to increase with HP-${\beta}$-CD content.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2001.05c
• /
• pp.92-95
• /
• 2001

고분자 복합체 절연재료는 porcelain 이나 glass 같은 세라믹 소재의 재료와 비교하여 옥외사용 시간의 관점에서 더 뛰어난 특정을 발휘한다. 그러나 노화되었을 때, 이들 옥외용 절연재료의 성질은 발수성이나 흡수성등과 같은 절연재료의 표면특성에 의해 변화한다. 이러한 표면특성의 변화는 누설전류에 의한 트래킹 (tracking), 침식 (erosion) 및 섬락현상(flashover) 등의 유전체 파괴에 이르게 한다. 본 연구에서는 고분자 복합체 절연재료로 널리 이용되고 있는 EPDM의 발수특성을 향상시키기 위해 기존에 이용되던 무기물 첨가제인 alumina hydrate(ATH)이외에 발수성이 뛰어난 실리콘 고무를 상용화제를 이용하여 블렌드하고, 각종 유기 첨가제 및 무기물 보강제를 이용하여 EPDM/Silicone 복합체를 제조하였다. EPDM/Silicone 복합체의 인장강도 및 유전강도는 실리콘의 함량이 증가할수록 낮아졌으며, 촉진 노화시험을 실시한 결과 $120^{\circ}C$까지 인장강도 및 신율을 유지하였다. 유전강도의 측정결과 복합체의 접촉각과 표면에너지 측정결과 Silicone 고무의 함량이 증가할수록 접촉각은 증가하고, 표면에너지는 낮아졌다. 경사평판법에의한 내트래킹성 측정결과 실리콘 함량이 증가할수록 내트래킹성은 우수하였으며, 실리콘 함량이 30%인 복합체에서는 트래킹 및 침식이 진행되지 않았다.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2003.10a
• /
• pp.130-135
• /
• 2003

고분자 재료는 일반적으로 전기적인 특성이 우수하고 가격이 저렴하기 때문에 케이블이나 wire의 절연재료로 널리 사용되고 있다. 그러나, 합성 고분자 물질은 대부분 유기 화합물로서 가연성을 지니고 있으며 작은 화재에서도 화염을 확산시켜서 경제적으로 막대한 손실을 유발할 수도 있으므로, 전기절연용 재료로 사용되는 합성 고분자 물질은 그 자체의 전기적 특성이 우수해야 할 뿐만 아니라 난연성을 부여할 필요할 필요가 있다.(중략)

• Journal of the Korean Chemical Society
• /
• v.55 no.1
• /
• pp.98-103
• /
• 2011

This study was done for the preparation of macromolecular material with UV-blocking features by adding the benzophenone group that is commonly used as a UV-absorbent and $TiO_2$ which is known to be a very stable material in chemical and physical aspects. Also, we compared the level of UV absorbency of the polymer produced from polymerization with previous materials and measured basic properties such as water content, refractive index and optical transmittance of produced contact lenses. The results of the measurement showed that the refractive index and water content of the contact lens with added UV-absorbent was 1.430~1.440 and 35.0~45.0% respectively, which was similar to that of previous contact lenses. Also, for optical transmittances of each wave length, contact lenses without the UV-absorbent was 89%, 88% and 89% respectively for UV-A, UV-B and visible light, indicating that the UV transmittance is very high though contrary with cases of contact lenses with added 2-hydroxy-4-methoxy-benzophenone and 2,4-dihydroxy-benzophenone which showed transmittances of 0% and 6% respectively for UV-A and UV-B showing a UV-blocking effect. Meanwhile, contact lenses with added $TiO_2$ showed transmittance of 6% and 51% respectively for UV-A and UV-B also showing a UV-blocking effect. The visible transmittance was 77~89% showing that it satisfies the visible transmittance required for ophthalmological materials.

• Korean Journal of Materials Research
• /
• v.8 no.2
• /
• pp.135-140
• /
• 1998

Drag reduction produced by dilute solution of water soluble ionic polymer-surfactant complex under turbulent flow in a rotating disk apparatus(RDA) was investigated in this study. Three different molecular weights of polyacrylic acid(PAA) were adopted as drag reducing additives, and distilled water was used as a solvent. Experiments were undertaken to observe the dependence of drag reduction on various factors such as polymer molecular weight, molecular expansions and flexibility, rotating speed of the disk and polymer concentration. Specific considerations were put on conformational difference between surfactant and polymer, and effect of pH on ionic polymer possessing various molecular conformation through pH. The complex of ionic polymer and surfactant(Sodium Dodecyl Sulfate) behaves like a large polyelectrolyte. Surfactant changes the polymer conformation and then increases the dimension of the polymer. The radius of gyration, hydrodynamic volume and relative viscosity of the polymer-surfactant system are observed to be greater than those of polymer itself. Such surfactant-polymer complex has enhanced drag reduction properties.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.5
• /
• pp.29-38
• /
• 2004

In this study, we investigated the thermal properties of corn-starch filled polybutylene succinate-adipate (PBS-AD) bio-composites. Thermal analysis (TA) is used to describe the analytical method for measuring the chemical property and weight loss of composite materials as a function of temperature. The thermal stability of corn-starch was lower than that of pure PBS-AD. As corn-starch loading increased, the thermal stability and degradation temperature of the bio-composites decreased and the ash content increased. It can be seen that the degree of compatibility and interfacial adhesion of the bio-composites decreased because of the increasing mixing ratio of the corn-starch. As the content of corn-starch increased, there was no significant change in the glass transition temperature (T_g) and the melting temperature (T_m) for the bio-composites. The storage modulus (E') and loss modulus (E") of the corn-starch flour filled PBS-AD bio-composites were higher than those of PBS-AD, because of the incorporation of corn-starch increased the stiffness of the bio-composites. At higher temperatures, the decreased storage modulus (E') of bio-composites was due to the increased polymer chain mobility of the matrix polymer. From these results, we can expect that corn-starch has potential as a reinforcing filler for bio-composites. Furthermore, we recommend using a coupling agent to improve the interfacial adhesion between corn-starch and biodegradable polymer.

• Journal of Adhesion and Interface
• /
• v.3 no.2
• /
• pp.45-52
• /
• 2002

기존의 점착제 합성방법에서 탈피하여 용액형 점착제(Solution)의 장점과 입자형 점착제(Emulsion)의 장점을 동시에 보유한 NAD (Non-Aqueous Dispersion Polymer)를 합성하였다. NAD는 메탄올 분위기에서 6개월 이상의 분산 안정성을 유지하였다. NAD는 용액에서 입자형 고분자의 형태를 이루고 있음을 도공 공정에서 확인하였다. 또한 기존의 아크릴 점착제의 장점과 고무계점착제의 장점을 결합한 고분자량의 점착제, GP (Graft Polymer)를 합성하였다. GP는 자체가 매우 높은 분자량을 보유하여 가교제의 첨가 없이도 우수한 물성을 나타내었다. GP는 일반적으로 고 분자량의 고분자에서 나타나는 Weissenberg effect 현상을 나타내었다. 이들의 점착제로 응용시 각각의 물성을 비교하여 나타내었다.

• Membrane Journal
• /
• v.27 no.3
• /
• pp.273-283
• /
• 2017

Polysulfone (PSF) is one of an important polymer that has been widely used in the manufacture of asymmetric microfiltration (MF) membranes. PSF membrane is considered as hydrophobic membrane that easily fouled during membrane operation process. The blending method is an effective method for improving the fouling resistance of PSF membranes. sPES (sulfonated polyethersulfone) is one of the useful polymers that can be used in PSF polymer blend method to improve hydrophilicity of PSF membranes. In this study, microfiltration polymer membranes were prepared by using PSF/sPES/PVP/BE/DMF casting solution and water coagulant. The morphology of MF membranes was changed by addition of a small amount of sPES in casting solution. The morphology of the sPES added membranes was changed into a highly asymmetric structure. The active layer grew and mean pore size was decreased by addition of sPES. However, the water flux of PSF/sPES/DMF/PVP/BE membrane was higher than that of PSF/DMF/PVP/BE membrane.

• Polymer(Korea)
• /
• v.27 no.6
• /
• pp.569-575
• /
• 2003

The flame retardancy was investigated when the halogenated flame retardant, decabromodiphenyl oxide (DBDPO) and chlorinated paraffin wax (CPW), was added to the polypropylene (PP) / montmorillonite (MMT) nanocomposites. The flame retardancy of polymer resin could be improved not only by addition of flame retardant but also with nanoparticles compositions. The effect of the contents of flame retardant and nanoparticles on the flame retardancy of polypropylene/ montmorillonite nanocomposite systems was thoroughly examined in terms of limited oxygen index (LOI) and cone calorimetry. As a results of cone calorimetry, the heat release rate (HRR) was reduced by the flame retardant DBDPO and CPW, and CPW was a little better than DBDPO. The LOI increased from flammable region (LOI<19) to nonflammable region (LOI>20) for all the flame retardants used in this study. Especially, the improvement in flame retardancy by compounding with PP and MMT was better than that by adding flame retardant to polypropylene. So, the addition of flame retardant after compounding with montmorillonite was more efficient than simple addition of flame retardant.

• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2013.11a
• /
• pp.221-222
• /
• 2013

다양한 첨가제가 들어가는 고분자 화합물(compound)의 제조에 있어 난연 발포 보조제인 팽창흑연(Expandable Graphite, EGP)은 흡유가가 낮기 때문에 비교적 많은 양을 첨가해도 혼합(Mixing)이 잘 되는 것으로 알려져 있다. 본 논문에서는 대표적인 인계 난연제 APP(Ammonium Polyphosphate)를 사용한 난연 EPDM(Ethylene Propylene Diene Monomer) 폼에 팽창흑연 첨가량을 증가시키면서 산소 지수와 발열량을 통해 난연 성능의 변화를 분석하였다. 산소지수는 ISO 4589-2 상온 산소지수 방법을, 발열량 평가는 ISO 5660-1 콘 칼로리미터를 활용하였다.