• Polymer(Korea)
• /
• v.32 no.1
• /
• pp.70-76
• /
• 2008

The PES-g-BTCA membrane was synthesized by UV irradiation method and then used to be modified into the PES anion exchange membrane by the amination reaction. Their chemical structures and adsorption properties were investigated. The degree of grafting and amination were increased with increasing the reaction time and had the maximum values of 138% and 1.20 mmol/g at 80 min, respectively. The initial thermal degradation temperature of PES membrane was $400^{\circ}C$. Which was reduced as the surface modification reaction had proceeded. The values of contact angle for PES membrane were decreased from 68.1 to $40.2^{\circ}$ with increasing the extent of amination, the water up-take and ion exchange capacity were also increased with increasing UV irradiation time until 80 min. The average pore size and BET surface area were decreased in order of PES, PES-g-BTCA, and aminated PES ion exchange membrane. Their average pore sizes were 624.8, 359.7, and 138.5 ${\AA}$, and their surface areas were 10.1,9.7 and 1.7 $m^2/g$, respectively.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.10a
• /
• pp.172.2-173
• /
• 2003

단백질, 탄수화물, 유지 등과 같은 생고분자를 소재로하여 제조하는 가식성 또는 생분해성 필름은 식품표면을 코팅하거나, 식품의 내부에 사용하여 식품을 외부의 충격으로부터 보호하고 식품의 저장수명을 증가시키는 동시에 수분, 기체 및 용질의 이동을 방지하는 기능을 한다. 이러한 가식성 필름의 소재 중 하나인 전분은 비교적 저가의 재료이고 기체투과를 방지하는 성질은 우수하지만, 탄력성이 적은 단점을 가지고 있다. 생고분자필름의 물리적 강도를 증진시키고 수증기의 투과성을 낮추는 방법으로 단백질과 탄수화물을 복합적으로 사용한다 본 실험에서는 분리 대두 단백질(SPI)과 옥수수 전분을 혼합하여 가식성의 생분해성 필름을 제조하고 이들의 이화학적 특성에 대해 연구하였다. SPI 필름은 SPI 5g에 증류수 100$m\ell$을 가해 glycerol 2g을 첨가해 제조하였으며, 옥수수 전분필름은 옥수수 전분 6g에 증류수 100$m\ell$을 가해 glycerol 1.2g을 첨가해 제조하였다. SPI와 옥수수 전분의 혼합필름은 SPI와 옥수수 전분의 양을 1：1 비율로 혼합하여 제조하였다. SPI 필름, 옥수수 전분 및 SPI와 옥수수 전분 용액의 혼합필름의 각각의 수증기 투과도는 7.49$\times$$10^{-11}$, 2.69$\times$$10^{-11}$, 4.24$\times$$10^{-11}$ g.m/m$^2$.s.Pa이었다. 본 실험으로 SPI의 단일재료로만 필름을 제조하였을 때보다 SPI 용액에 옥수수 전분용액을 혼합해 필름을 제조하면 탄력성을 유지하면서 수증기 투과도를 낮출 수 있다는 결과를 얻을 수 있었다.현미밥의 유리아미노산 분석 결과 필수아미노산을 포함한 다량의 아미노산이 존재하였으며 혈압강하 기능성 성분인 GABA(${\gamma}$ -amino butyric acid) 함량은 현미가 4.7 mg/100 g, 발아현미 20.8 mg/100 g이었으며, 동결건조 후 분석한 발아현미밥의 GABA 함량은 5.7 mg/100 g이었다. 발아현미밥의 관능검사 결과는 색, 윤기, 맛, 부착성, 응집성, 탄력성이 A가 유의적으로 높았으며, 외관의 경우도 A가 더 높은 평가를 받았다. 또한 전반적으로 A가 B에 비해 유의적인 차이를 나타내진 않았지만 더 나은 선호도를 나타내었다.좋게 평가되었다.＊값은 63-68사이로, a＊값은 0.13에서 -0.89사이를 b＊값은 2-5값 사이에서 변화하여 제조한 죽의 색이 옅은 황색임을 알 수 있었다. 고형분 함량, 퍼짐성과 pH에 대한 $R^2$은 각각 0.4280, 0.5433과 0.2406임을 볼 때 버섯, 당근, 대파의 비율에 따라 제조한 쇠고기 야채 쌀죽의 고형분 함량, 퍼짐성과 pH는 설정된 범위내에서 그 유의성이 인정되지 않아 큰 영향을 미치지 않음을 알 수 있었다. 관능검사 결과, 색과 향에 대한 반응표면 회귀식의 $R^2$은 각각0.6000과 0.7825이고 P-value는 각각 0.4290과 0.0942로서 5% 수준에서 유의한 상관성이 없음을 확인할 수 있었다. 맛과 점성에 대한 $R^2$은 0.8717과 0.8068이고 P-value는 각각 0.0195 (p ＜0.05)와 0.0612로서 야채의 배합비에 따라 맛에 있어서 유의확률 5%수준에서 그 유의성이 인정되었으며, 전체적인 기호도에 대한 유의성은 $R^2$이 0.8463이고 P-value는 0.034

• Polymer(Korea)
• /
• v.36 no.2
• /
• pp.245-250
• /
• 2012

Branched polypropylenes (PP) with long chain branch were prepared by solid state reaction with three different branching agent of 0.3 wt% content. The chemical structures, non-isothermal crystallization behavior and complex viscosity of the branched PP were investigated by FTIR, DSC, optical microscope, and dynamic rheological measurement. The chemical structure of the branched PP was confirmed by the existence of =C-H stretching peak of the branching agent at 3100 $cm^{-1}$. There was no distinct change in melting temperature in case of PP-D-0-3 and PP-F-0-3, but PP-H-0-3 indicated a decrease in melting temperature. The decrease in melting temperature was interpreted by the fact that the degradation reaction of PP was more dominant than branched reaction, and confirmed by a decrease in complex viscosity. The non-isothermal crystallization behavior of the branched PP was analyzed using by Avrami equation. The Avrami exponent of PP was 3, and the values of the branched PP with DVB and FS were below 3. The activation energy of PP calculated by Kissinger method was 25 kJ/mol, and there were no big difference in activation energies of the branched PPs compared to PP.

• Polymer(Korea)
• /
• v.38 no.6
• /
• pp.752-759
• /
• 2014

Crosslinked polyimides (PIs) were synthesized by reacting 4,4'-(hexafluoroisopropylidene)-diphthalic anhydride (6FDA) and 2,2'-bis(trifluoromethyl)benzidine (TFDB) with various ratios of the cross-linkable, end-capping agent cis-1,2,3,6-tetrahydrophthalic anhydride (CDBA) via ring-opening metathesis polymerization. Residual stress behaviors were investigated in-situ during thermal imidization of the crosslinked PI precursors using a thin film stress analyzer (TFSA) by wafer bending method. The thermal properties were investigated via differential scanning calorimetry (DSC), thermomechanical analysis (TMA), and thermogravimetric analysis (TGA). The optical properties were measured by ultraviolet-visible spectrophotometer (UV-vis) and spectrophotometry. All properties were interpreted with respect to their morphology of crosslinked networks. With increasing the amounts of the end-capping agent, the residual stress decreased from 27.9 to -1.3 MPa, exhibited ultra-low stress and high thermal properties. The minimized residual stress and enhanced thermal properties of the crosslinked PI makes them potential candidates for versatile high-density multi-layer structure applications.

• Polymer(Korea)
• /
• v.33 no.1
• /
• pp.72-78
• /
• 2009

In this study, the behaviour of $SO_2$ and $NO_2$ adsorption on aminated ultrafine fibrous PP-g-AAc ion exchanger was investigated, The amount of adsorbed $SO_2$ increased with increasing the initial concentration of $SO_2$. The adsorption breakthrough time in the low concentration of $SO_2$ was faster than high concentration. The adsorption breakthrough occurred within 60 min. Approximately 80% of $SO_2$ was adsorbed below 100 ppm $SO_2$ and 90% of $SO_2$ over 100 ppm $SO_2$ respectively. The selective adsorption rate for $NO_2$ was lower than that of $SO_2$. The adsorption rate for $SO_2$ was decreased with increasing flow rate and that of $NO_2$ was 60%. The breakthrough occurred within 60 min. The adsorption rate for $SO_2$ was 92% in the 250 mL/g water content. Isotherm adsorption model for $SO_2$ was close to the Langmuir rather than Freundlich model.

• Polymer(Korea)
• /
• v.37 no.6
• /
• pp.702-710
• /
• 2013

Zaltoprofen loaded polyoxalate (POX) microspheres were prepared by an emulsion solvent-evaporation/extraction method like oil-in-water (O/W) for sustained release of zaltoprofen. The influence of several preparation parameters such as fabrication temperature, stirring speed, intensity of the sonication, initial drug ratio, molecular weight ($M_w$) of POX, concentration of POX and concentration of emulsifier has been investigated on the zaltoprofen release profiles. Physicochemical properties and morphology of zaltoprofen loaded POX microspheres were investigated by scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning calorimeter (DSC) and Fourier transform infrared (FTIR). Through the analyzed results, it was demonstrated that the characteristics of the microspheres greatly affected by the prepared condition. The releases behavior of zaltoprofen was investigated for 10 days in vitro. It was confirmed that the release behavior of zaltoprofen can be controlled by the manufacturing factor of solvent-evaporation/extraction method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.217-217
• /
• 2019

해안과 하천이 위치해 있는 낙동강하구의 담 염수 경계면 추적 연구에서 담 염수 경계면의 담수기원특성을 분석하기 위해서는 담 염수 경계면을 이루는 담수의 기원이 하천 혹은 지하수 인지를 규명하는 것이 매우 중요하다. 담 염수 경계면에 있는 담수는 일반적으로 하천과 지하수에 의한 것으로, 낙동강하구 일원을 대상으로 지하수공 내 해수침투 여부 파악을 위해 화학적(유기물) 분석을 실시하였다. 이와 아울러 낙동강하구 일원에서 담 염수 경계면에서 채취한 수질시료의 담수기원을 분석하기 위하여 K-water연구원 수질안전센터에 지하수공 7개지점(BH-1~7호공)의 심도별 물시료 2~4개지점(총 23개 지점), 하천(1개 지점), 해수 및 해안유출수(각 1개 지점)를 포함한 26개 시료를 LC-OCD(Liquid Chromatography-Organic Carbon Detector)로 분석하였다. LC-OCD 분석결과 특성은 기본적으로 유기물질이 물에서 유래한 aquagenic 혹은 토양층에서 유래한 pedogenic 유기물질 인지에 달려있다. 댐 또는 하천에서 pedogenic 유기물의 농도는 일반적으로 유역분지의 수문 또는 수리지질학적 경로에 의존한다. pedogenic 유기물들은 주로 상대적으로 작은 분자량을 갖는 친수성, 높은 사슬밀도 및 내화성 분자특성을 갖는 펄빅산으로 구성된다. aquagenic 유기물질은 수생 식물성 생물이나 플랑크톤의 분해 산물로서 세포벽에서 유래된 peptidoglycans와 고분자량의 polysaccharides 등을 포함한다(Chio & Jung, 2008; Buffle, 1988). 담 염수 경계면 추적을 위한 7개 관측공의 심도별 수질시료는 하천, 해수, 그리고 해안유출수의 용존유기탄소를 분석하기 위하여 LC-OCD로 정밀분석하였다. 그 결과, humic, 휴믹물질의 산화물질인 building blocks, 생물고분자 물질(bio-polymers), neutrals, acids로 분석되었으며, 일반적인 자연유기물질의 기원은 pedogenic과 aquagenic 유기물질로 분류된다. IHSS 표준물질 분석 등을 통한 SUVA 값으로부터 자연유기물질의 기원정보를 제공하는 HS-Diagram으로 도시한 결과, 2018년 11월 2일 조사한 26개의 원수시료 전체는 pedogenic fulvic acid〉aquagenic fulvic acid으로 하천의 기원이 우세한 것으로 분석되었다. BH-1호공과 BH-6호공의 특정 1개구간 GL.-6m를 제외한 모든 구간에서 aquagenic FA의 지하수 기원으로 분석되었으며, 나머지 지하수공(BH-2, 3, 4, 5, 7)과 하천 및 해안유출수는 유역분지 수문학적 경로인 pedogenic FA의 하천 기원의 담수인 것으로 분석된다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.8 no.1
• /
• pp.90-96
• /
• 2000

The composition of leachates varies depending on the waste characteristics, landfill age and landfilling method. Generally, leachates contain high dissolved organic substance and ammonia nitrogen whereas phosphorus concentration was very low. Leachate A produced from young landfill is characterized by high BOD5/COD ratio (0.8) whereas leachate C produced from old landfill has lower BOD5/COD ratio (0.1). Maximum biochemical methane potential of leachate A, B (from medium landfill) and C were 271,106 and 4 ml CH4/g-COD, respectively. On the other hand, the maximum biodegradability of leachate A, B, and C were 75,30, and 1%, respectively. These results indicated that anaerobic treatment of leachate from young landfill was effective in removing organic pollutants. In case of leachate C, carbon might reside in the form of large molecular weight organic compounds such as lignins, humic acids and other polymerized compounds of soils, which are resistant to biodegradation. The lag-phase period increased with the increasing organic concentration in leachate. In case of leachate A of concentration greater than 25%, the lag-phase period increased sharply. This implied that the start-up period of anaerobic process using an unacclimated inoculum could be extended due to the higher concentration of leachate. This relatively long lag-phase is probably related to the fact that most of the inhibitory compounds have been diluted beyond their inhibitory concentrations of less than 50%. Furthermore, the ultimate methane yield and methane production rate decreased as leachate concentration increased. It was anticipated the potential inhibition was related with the steady-state inhibition as well as the initial shock load.

• Polymer(Korea)
• /
• v.35 no.2
• /
• pp.157-160
• /
• 2011

In this paper, poly (dimethyl siloxane) (PDMS) was modified using electron beam irradiation and its property was investigated. PDMS sheets prepared using a conventional thermal curing method were irradiated by electron beams at absorbed doses between 20 and 200 kGy and their properties were characterized using swelling degree and contact angle measurements, universal testing machine (UTM), thermogravimetric analyzer (TGA), and X -ray photoelectron spectrometer (XPS). The results of the swelling degree measurements, UTM, and TGA revealed that the swelling degree of the irradiated PDMS sheets was reduced down to 24% in comparison to the control sheet, and their compression strength and thermal decomposition temperature increased up to maximum 2.5 MFa and $10^{\circ}C$, respectively, due to the increase in crosslinking density by irradiation. In addition, on the basis of the results of contact angle measurements and XPS, the wettability of the PDMS sheets was enhanced up to 24% owing to the generation of hydrophilic functional groups on the PDMS surface by oxidation during electron beam irradiation.

• Journal of Preventive Medicine and Public Health
• /
• v.15 no.1
• /
• pp.187-196
• /
• 1982

The followings are the results of the study on industrial accidents occurred at 12 factories manufacturing metal products during the period of 2 years from January 1980 to December 1981 in the area of Yong-Dung-Po in Seoul. The results of the study are as follows: 1. The incidence rate of industrial injuries was 45.7 per 1,000 workers of the sample group and the rate of male (54.0) was three times higher than that of female (17.5). 2. In age groups, the highest rate was observed in the group of under 19 years old with 83.5, while the lowest in the group of 40s. 3. It was found that those who had short term of work experience produced a higher rate of injuries, particularly, the group of workers with less than 1 year of experience showed the highest rate of it as 48.1%. 4. In working time, the highest incidence rate occurred 3 and 7 hours after the beginning of their working showing the rate of 6.0 and 6.1 per 1,000 workers, respectively. 5. The highest incidence rate was observed on Monday as 8.4 per 1,000 workers, and it was 18.3% in aspect of the days of a week. 6. In aspect of the months of a year, the highest incidence was observed on July 1,000 workers and the next was on March as 4.8. These figures account for 11.8% of total occurrence in respective month. as 5. 4 per and 10.5% 7. In causes of injuries, the accident caused by power driven machinery showed the highest rate with 37.5%, the second was due to handling without machinery with 17.2%, and the third was due to falling objects with 14.2%, and striking against objects with 10.2%, and so on. 8. By parts of the body affected, the most injuries 84.3% of them occurred on both upper and lower extremities with the rate of 58.8% for the former and 25.5% for the latter. Fingers were most frequently injured with a rate of 40.3%. Comparing the sites of extremities affected, rate of injuries on the right side was 55.0% and 45.0% on the left side. 9. In the nature of injury, laceration and open wound were the highest with 34. 0%, the next was fracture and dislocation with 31. 9%, and sprain was the third with 8.1%. 10. On the duration of treatment, it lasted less than one month in 68.9% of the injured cases, of which 14.5% of the cases were recovered within 2 weeks, and 54.4% of them were treated more than 2 weeks. And the duration of the treatment tended to be prolonged in larger industries. 11. The ratio of insured accidents to uninsured accidents was 1 to 4.7.