• Journal of the Korean Wood Science and Technology
• /
• v.28 no.1
• /
• pp.55-64
• /
• 2000

Culture maturity assessment can be used to control fruiting body flush timing. Culture maturity of sawdust-based substrate was evaluated by using oak mushroom, (Lentinula edodes (Berk.) Pegler). The influence of substrate water potential (${\psi}$) on the growth and fruiting of three genotypes of L. edodes was also investigated. Glucosamine content revealed a peak at the fruiting body senescent stage. Glucosamine increased steadily to the sporophore senescent stage, and sharply declined at crop treatment. Lipid phosphate and ergosterol contents peaked at pinning and button break stages, respectively. Therefore lipid phosphate and ergosterol contents would be considered as the convenient measurement for judging culture maturity and fruiting potentials. The substrate pH values before inoculation and on the fruiting stage were varied from 6.3 to 4.0. This pH changes were detected as changes in color from bluish purple to yellow by direct bromphenol blue(BPB) spraying, and shown a good correlation with fruit body yield of the 1 st flush. Concerning water potential of the cultures, a slight reduction of water potential, -0.5MPa, stimulated mycelial and colony growths on liquid, agar and sawdust-based substrates. The water potential of well-colonized matured substrate was -0.7MPa and -4.0MPa, before and after the fruiting, respectively. Excellent water providing capacity (higher ${\psi}$) is expected to well-matured cultures with a high density of mycelial colonization. Also, the substrate water potential significantly affected by the interaction between genotypes and spawn run time.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.7
• /
• pp.665-671
• /
• 2017

The alkali-Metal Thermal-to-electric Converter (AMTEC) is one of the promising static energy conversion technologies for the direct conversion of thermal energy to electrical energy. The advantages over a conventional energy converter are its high theoretical conversion efficiency of 40% and power density of 500 W/kg. The working principle of an AMTEC battery is the electrochemical reaction of the sodium through an ion conducting electrolyte. Sodium ion pass through the hot side of the beta"-alumina solid electrolyte (BASE) primarily as a result of the pressure difference. This pressure difference across the BASE has a significant effect on the overall performance of the AMTEC system. In order to build the high pressure difference across the BASE, hermeticity is required for each joined components for high temperature range of $900^{\circ}C$. The AMTEC battery was manufactured by utilizing robust joining technology of BASE/insulator/metal flange interfaces of the system for both structural and electrical stability. The electrical potential difference between the anode and cathode sides, where the electrons emitted from sodium ionization and recombined into sodium, was characterized as the open-circuit voltage. The efforts of technological improvement were concentrated on a high-power output and conversion efficiency. This paper discusses about the joining and performance of the AMTEC systems.

• Applied Chemistry for Engineering
• /
• v.10 no.8
• /
• pp.1192-1199
• /
• 1999

The morphology changes of cadmium hydroxide into ${\gamma}$ phase by eletrolytes were carried out to improve the high rate charge and discharge efficiency of pasted cadmium electrodes. KOH solutions with different concentrations of NaOH were used as eletrolytes. It was found that the utilization of active material of cadmium electrode was the best in an electrolyte with 1.82 M NaOH. The amount of ${\gamma}-Cd(OH)_2$ increased in proportion to the concentration of NaOH. The surface area measurement showed that an active material which contained mainly ${\gamma}-Cd(OH)_2$ had a higher specific surface area than an active material of ${\beta}-Cd(OH)_2$. In a sealed cell, the discharge capacity was improved at high rate charge and discharge (1.0 C, 2.0 C) by using an electrolyte with NaOH. Furthermore, these improved performances were maintained up to 500 cycles at 1.0 C rate charge and discharge cycles.

• Applied Chemistry for Engineering
• /
• v.18 no.1
• /
• pp.24-28
• /
• 2007

The etching of zinc oxide (ZnO) thin films has been studied using a high density plasma in a $Cl_2/Ar$ gas. The etch characteristics of ZnO thin films were systematically investigated on varying $Cl_2$ concentration, coil rf power, dc-bias voltage, and gas pressure. With increasing $Cl_2$ concentration, the etch rate of ZnO thin film increased, the redeposition around the etched patterns decreased but the sidewall slope of the etched patterns slanted. As the coil rf power and dc-bias voltage increased, the etch rates of ZnO thin films increased and etch profiles of ZnO thin films were improved. With increasing gas pressure, the etch rate of ZnO thin films slightly increased but little change in etch profile was observed. Based on these results, the optimal etching conditions of ZnO thin film were selected. Finally, the etching of ZnO thin films with a high degree of anisotropy of approximately $75^{\circ}{\sim}80^{\circ}$ without the redepositions and residues was successfully achieved at the etching conditions of 20% $Cl_2$ concentration, coil rf power of 1000 W, dc-bias voltage of 400 V, and gas pressure of 5 mTorr.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2001.06a
• /
• pp.8-8
• /
• 2001

초고속 증착은 짧은 시간에 박막 형성을 가능하게 하므로 window glass 코팅등의 대면적 코팅에 있어서 비용을 절감 시키고, 대량생산을 가능하게 만들기 때문에 관심이 집중되고 있다. 고속증착 공정으로는 high current arc, laser arc, hollow cathode discharge ion plating 그리고 마그네트론 스퍼터링법 등이 있다. 특별히 마그네트론 스퍼터링법은 3m이상의 넓이에 코팅을 할때 두께가 매우 균일하며, 증착율은 evaporation 공정에 비해 경제적, 기능적인 면에서 효율적이다. 그리고 증착된 박막은 매우 조밀하고 좋은 밀착력을 갖고 있으며, 고융점 금속을 포함하여 금속 합금 및 혼합물의 비율을 조정 및 금속 산화물, 질화물, 탄화물 등과 같은 금속의 증착도 stoichiometry를 조정하여 박막을 합성 시키는데 있어서 효과적이다. 이러한 초고속 증착을 만들기 위한 마그네트론 스퍼터링법의 요건은 마그네트론 원이 높은 타켓 power density를 가져야 하며, 타켓에서 효율적으로 플라즈마를 구속하여 스퍼터 되는 이온의 양을 최대화 시킬 수 있어 한다. 따라서 본 실험에서는 초고속 증착을 위해서 직경 50mm 타켓의 UBM magnetron원을 설계 제작하였다. 고밀도의 플라즈마를 형성시키기 위해서, Poisson simulation c code를 이용하여 자기장의 방향, 세기 및 밀도를 측정 하였고, 자기장 측정기(Gauss meter)를 이용하여 실제 자장을 측정 비교 분석하였다. 상기의 data를 바탕으로 여러 형상의 마그네트론원을 설계, 제작하였고. 마그네트론 원의 특성 분석을 위해 I-V 방전 특성을 평가하였고 substrate ion current density와 박막의 증착율을 측정하였다.duty-on 시간의 증가에 따라 $Cr_2N$ 상의 형성이 점점 많아져 80% duty-on 시간 경우에는 거의 CrN과 $Cr_2N$ 상이 공존하는 것으로 나타났다. 또한 duty-on 시간이 증가할수록 회절피크의 세기가 증가하여 결정화가 더 많이 진행되어짐을 알 수 있었다. 마찬가지로 바이어스 펄스이 주파수에 다른 결정성의 변화도 펄스의 주파수가 증가할수록 박막이 결정성이 좋아지고 $Cr_2N$ 상이 쉽게 형성되었다. 증착 진공도에 따른 결정성은 상대적으로 질소의 농도가 높은 낮은 진공도에서는 CrN 상이 주로 형성되었으며, 반대로 높은 진공도에서는 $Cr_2N$ 상이 많이 만들어졌다. 즉 $1.3{\times}10^{-2}Torr$의 증착 진공도에서는 CrN 상만이 보이는 반면 $9.0{\tiems}1-^{-2}Torr$ 진공도에서부터 $Cr_2N$ 상이 형성되기 시작하여 $5.0{\tiems}10^{-2}Torr$ 진공도에서는 두개의 상이 혼재되어 있음을 알 수 있었다. 박막의 내마모성을 조사한 결과 CrN 박막의 마찰 계수는 초기에 급격하게 증가한 후 0.5에서 0.6 사이의 값으로 큰 변화를 보이지 않았으며, $Cr_2N$ 박막도 비슷한 거동을 보였다.차 이, 목적의 차이, 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.27 no.3
• /
• pp.122-129
• /
• 2017

For the production of a high-density ITO target, $In_2O_3$ powders with a small particle size and low agglomeration should be synthesized. The purpose of this study is to control the size and shape of the Indium hydroxide precursor which affects the properties of the $In_2O_3$ powder. As a starting raw material, Indium metal was dissolved in a Nitric acid ($HNO_3$) solution. The effect of concentration, pH, and temperature on the properties of Indium hydroxide was investigated using ammonium hydroxide as a precipitant. Crystallite size of each sample was analyzed by X-ray diffraction and the shape and the size of the powder was analyzed by transmission electron microscopy. As a result, the particle size of Indium hydroxide was increased with increase in the concentration of $In(NO_3)_3$ and the particle size and shape of the Indium hydroxide remained unchanged with increase in the pH of the solution. The particle size increased with increase in the precipitation temperature during precipitation.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.1
• /
• pp.13-22
• /
• 2001

This paper presents three dimensional structure of RF packages and the improvement effect of its electrical characteristics when implementing RF transceivers. We divided RF modules into several subunits following each subunit function based on the partitioning algorithm which suggests a method of three dimension stacking interconnection, PAA(pad area array) interconnection and stacking of three dimensional RF package structures. 224MHz ITS(Intelligent Transportation System) RF module subdivided into subunits of functional blocks of a receiver(RX), a transmitter(TX), a phase locked loop(PLL) and power(PWR) unit, simultaneously meeting the requirements of impedance characteristic and system stability. Each sub­functional unit has its own frequency region of 224MHz, 21.4MHz, and 450KHz~DC. The signal gain of receiver and transmitter unit showed 18.9㏈, 23.9㏈. PLL and PWR modules also provided stable phase locking, constant voltages which agree with design specifications and maximize their characteristics. The RF module of three dimension stacking structure showed $48cm^3$, 76.9％ reduction in volume and 4.8cm, 28.4％ in net length, 41.8$^{\circ}C$, 37% in maximum operating temperature, respectively. We have found that three dimensional PAA package structure is able to produce high speed, high density, low power characteristics and to improve its functional characteristics by subdividing RF modules according to the subunit function and the operating frequency, and the features of physical volume, electrical characteristics, and thermal conditions compared to two dimensional RF circuit modules.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.2
• /
• pp.53-68
• /
• 2011

A selection of viewpoint is a first priority for landscape evaluation. However, it has been artificially carried out by a subjective method without of criterion. Therefore, this study proposed the objective and quantitative viewpoint selection methods using space syntax and GIS. For this, the study area on samduk3 residential improvement district located at Daegu city was divided into 24 sectors of visibility zone by distance and direction. After that, the preliminary viewpoints equally distributed in space were selected by axial map analysis of space syntax and viewshed-frequency analysis of GIS. According to the result of selection of the final viewpoints using the VEI(Viewpoint Evaluation Index), all the final viewpoints were placed in the National Debt Repayment Movement; VEI value of VP-2 was 112.63 in the foreground, VP-10 was 18.31 in the middleground and VP-18 was 5.55 in the background. Selected viewpoints were verified as a big changing of landscape variation and high chance of view such as the public area, the park and the high-density residential area. Thus, VEI will be used as a quantitative method of selecting viewpoints and it is expected to be able to use as the objective indicator.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.135-147
• /
• 2008

One of the efforts both to prevent urban sprawling development patterns and to promote use of public transportation is known as Transit-Oriented Development (TOD), including such planning elements as the density and diversity of land use and pedestrian-friendly urban design around a transit center. The aim of this study is thus to conduct impact analyses of TOD planning elements on transit ridership in the Seoul rail station areas. First, the authors investigate and draw out various actual elements of TOD planning by using GIS-based data and Smart Card data. Then the authors analyze impacts of TOD planning elements on transit ridership for the Seoul rail station areas. After condensing 34 variables presumably influencing transit ridership into seven factors by using factor analyses, the study utilizes multiple regression modeling methods to identify their impacts on transit ridership. The analysis results demonstrate that transit ridership tends to increase more in rail station areas where there is a non-residential high density, mixed use of land and narrow and small-size road network patterns. The implementation of TODs should be a useful method in inducing a Transit-Oriented City through redevelopment and new development.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.176-180
• /
• 1992

Nitrification Is an important facet of water recycling fish culture system, because the toxic cation ammonia is converted to the innocuous anion nitrate. This study was attempted to find the optimal design factor of submerged filter for ammonia removal in water recycling fish culture system. The experimental system was designed submerged filter with corrugated skylight plate, and operated in the fish farm, National Fisheries University of Pusan. When the influent ammonia concentration was about 10mg/l (9.43-13.66mg/l) nitrification rates were tested for the removal of ammonia over a four stage of the hydraulic loadings. The submerged filter removed 76.24, 62.88, 39.09 and $9.20\%$ of the ammonia to hydraulic load of 0.028, 0.037, 0.056 and $0.111m^3/m^2$. day, respectively. We can apply the above data to the material balance on the ammonia concentration in a fish reservoir, and conclude that the maximum allowable ammonia production was 1.52mg/min, and the optimal hydraulic loading was $0.047m^3/m^2$\;\cdot day$, in order to maintain the ammonia concentration below 10mg/l in the fish reservoir.