• Applied Chemistry for Engineering
• /
• v.31 no.3
• /
• pp.310-316
• /
• 2020

Terpene-modified phenolic resins were used to improve the tires wet traction related to the driving safety and also rolling resistance related to fuel efficiency. In this work, alpha-pinene, beta pinene, and delta limonene resins, which constitute different basic structures of terpene-modified phenolic resins, were individually added to the tread compounds of tires and their physical properties were compared with those of the alkyl phenol resin compounds. Alkyl phenolic resins showed no significant difference in tangent delta from terpene-modified phenolic resins at 0 ℃, which is related to wet traction, but showed higher tangent delta at 80 ℃, which is related to rolling resistance, indicating smaller fuel efficiency improvement effects. Among the terpene-modified phenolic resins, beta pinene one showed improved wet traction and fuel efficiency compared to those of other resins. Delta limonene resin showed the best wet traction improvement effect, and alkyl phenolic resins showed relatively high tensile strength and abrasion property. All terpene-modified resins exhibited better rolling resistance than those of alkyl phenolic ones so that they can be said to have better fuel efficiency improvement effects and also to improve other properties compared to those of blanks. Terpene-modified phenolic resins could be used when mixing tire compounds referring to the properties of the phenolic resins revealed in this work, which could result in preparing compounds with improved wet traction and rolling resistance.

• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.79-85
• /
• 2010

This paper presents a preliminary study of roller types for chip seals based on aggregate retention performance. Chip seal test sections composed of single seals of granite 78M aggregate and CRS-2 emulsion were constructed using three different roller types: the pneumatic tire roller, steel wheel roller, and combination roller. In order to investigate the performance of these rollers effectively, it is critical to test chip seal samples obtained directly from field construction. Therefore, test sections were constructed on New Sandy Hill Church Road near Bailey, North Carolina. Chip seal samples obtained from these sections were used for laboratory testing. The aggregate retention performance was evaluated using the flip-over test (FOT), Vialit test, and the third-scale Model Mobile Loading Simulator (MMLS3). Based on the test results and visual observation, both the pneumatic roller and the combination roller used together are recommended to improve chip seal performance with the sequence of the pneumatic roller rolling first followed by the combination roller.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.69-69
• /
• 2011

폴리케톤 섬유는 제조 원료로 에틸렌과 일산화탄소를 사용하여 합성한 공중합체 물질로 생산에 필요한 비용을 크게 절약할 수 있다. 폴리케톤 섬유는 p-아라미드 섬유에 근접하는 고강도 고탄성을 가진 섬유로 우수한 내화학성을 가지며, 고무와의 계면접착이 우수하다는 특성을 가지고 있어 MRG(Mechanical Rubber Goods)용 보강재 및 타이어코드로의 사용에 대한 관심이 증대하고 있다. 그러나 폴리케톤 섬유의 생산 및 산업현장에서의 활용은 아직 적은 상태로 그 특성에 대한 연구가 미흡한 상태이다. 따라서 본 연구에서는 폴리케톤 섬유의 기본적인 특성 분석을 하고, 폴리케톤 소재의 표면을 UV 조사와 인산을 이용한 산처리 방법을 이용하여 처리하고 표면처리에 따른 폴리케톤 섬유의 표면특성 및 물성특성을 분석하였다. UV 조사 처리시 에너지 변화와 산처리시의 pH조건 및 처리시간의 변화에 따른 표면의 미세구조를 SEM과 AFM 등을 이용하여 관찰한 결과, UV 에너지와 산처리 조건의 증가에 따라 표면요철이 증가를 보이다가 과도한 처리에 의하여 표면에 degradation이 발생하였다. 또한 UV 에너지 및 산처리 조건에 따른 열적, 화학적 그리고 물리적 특성의 변화를 분석하였다.

• Journal of the Korean Society of Industry Convergence
• /
• v.2 no.1
• /
• pp.69-75
• /
• 1999

Intending to develop a new rubber curing process using only microwave, the both the characteristics of cure and the mechanical properties of rubbers for the tire tread, for which a green styrene-butadiene compounds had been cured with 2.45 GHz microwave, have been compared with those of the custom thermal cured rubber. The unintentional hot spot formation in the compound during the microwave curing has not found where the compound has a microwave absorbing ceramic powders in 4.18 weight percents and the supplying voltage has been adjusted to 90 volts. The new microwave process accomplished preheating to 418K in a quarter of the thermal cure time. The average tensile strength of the microwave-cured rubber indicating $190kg/cm^3$ was compatible to that of the thermal cure. In conclusion, the new microwave cure had approved to be applicable in a commercial plant.

• Journal of the Korean Applied Science and Technology
• /
• v.28 no.3
• /
• pp.345-350
• /
• 2011

Antioxidant agent, 1,1,3-tris(2-methyl-4-hydroxy-5-tert-butylphenyl)butane were prepared and investigated the antioxidant activity on recycled rubber mat manufactured with waste tire powder. Mechanical properties of rubber mat are influenced by many factor such as compounding ingredients and state of cure, process of rubber, and fillers. Our study aim is to investigate influence of antioxidant activities on ozone cracking and the thermal aging time. In this work, the degradation of recycled rubber mat was studied and suggested mechanism to involve two-type of degradation, thermal aging and cracking both of which can be contained antioxidant or non-antioxidant agent.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.17-17
• /
• 2012

수송용 섬유소재는 자동차, 항공기 또는 선박 등의 교통 및 운송 분야에 기여하는 사용되는 섬유소재를 말하며, 내장재, 각종 호스류, 벨트류, 타이어, 안전용품, 필터류 등을 포함하고 일반적으로 섬유, 발포체, 고무, 플라스틱, 접착제 등 유기소재가 결합된 복합체이다. 기존 섬유기술의 혁신과 더불어 IT, NT, BT, ET 등 첨단 기술과의 융합에 의한 고성능 극한 슈퍼섬유, 나노 복합섬유 등의 신소재를 개발하여 산업 전반에서 플라스틱의 금속소재 대체수요를 증가시키고 산업자재의 고성능화, 고기능화, 다양화를 이루기 위해 다양한 노력이 진행하고 있다. 현재 수송용 섬유소재 산업은 기술의 연결고리가 부족하며, 선도기업 및 원천기술이 부족하며, 자동차용 섬유부품소재 관련 기업의 역량도 부족한 실정이다. 이에 광역경제권 연계협력사업을 통해 생산기반의 대경권(대구경북)과 수요중심의 동남권(부산경남)의 네트워크를 강화하여 완성품 업체 및 수요기업과의 네트워킹을 강화하고자 한다. 따라서 본 연구에서 수송용 섬유소재개발, 수송용 친환경 oam-skin 일체형 표피재 개발, 고속성형 복합소재 및 수송용 경량부품 개발, 초경량 고내열 고강도 섬유활용 하이브리드 wire & cable 개발 등 수송용 섬유소재를 개발하고, 또한 수송용 섬유소재의 생산-수요 연계를 통한 투자활성화, 기술개발, 소재 산업 육성을 강화하여, 산학연네트워크구축, 지역 간 협력 및 국제적 협력, 생산-수요기반의 연계협력시스템을 활용한 자립형 수송용 소재 공급기지 완비하는 데 목적이 있다.

• 한국방재학회:학술대회논문집
• /
• 2011.02a
• /
• pp.197-197
• /
• 2011

최근 들어 전력 사용량의 증가로 인한 화력발전소의 부산물인 석탄회 중 바텀애시와 각종 공공사업과 관련하여 해마다 현장발생토의 발생량이 지속적으로 증가하고 있는 추세이다. 바텀애시와 현장발생토사를 효과적으로 재활용하는 방법 중 유동성 뒤채움재를 개발하여 활용하는 방안을 모색하기 위한 연구이다. SP로 분류된 흙 현장발생토와 서천 화력발전소에서 발생하는 석탄회 중 입경이 0.9~1.5mm의 바텀애시만을 선별하여 현장발생토와 바텀애시의 비율을 7 : 3으로 변환한 최적배합을 선정하여 강재로 제작된 가로 80cm, 세로 60cm, 높이 90cm의 모형토조를 이용하여 실험을 진행하였으며, 사용상 지하 매설이 되는 관의 거동 특성은 확인하기 위하여 내경 30cm, 두께 8mm의 연선관 중 하나인 PVC관을 원형지하매설관으로 선정하여 배합을 타설하는 과정과 타설 후 7일간의 양생기간을 거친 후 차량하중으로 가정할 수 있는 하중을 가하여 원형지하매설관의 관외부에서 수직방향과 수평방향의 토압과 관내부의 수직 수평방향 변위 그리고 관 자체의 횡 종단 변형을 측정하여 원형지하매설관의 거동특성을 파악하였다. 타설시 지하매설관은 유동성 뒤채움재의 특성으로 인하여 시간이 지남에 따라 안정화되는 것을 확인할 수 있었으며, 최대하중을 3300kgf로 하여 하중 재하 후 지하매설관의 거동특성은 대체적으로 일반 모래를 사용하여 실험한 값보다 적은 변형 특성을 보이고 있으나 수평토압의 경우 일반적인 흙의 변형과 전혀 상이한 결과값을 보이는 경우도 있어 추가적인 실험 및 고찰의 필요하다. 본 실험에서 사용한 최적배합비 이외의 배합으로 같은 실험을 수행하여 바텀애시 량의 가감 및 재활용 재료인 폐타이어 고무칩등을 첨가한 실험을 계획하고 있으며 추후 실내시험과 모형실험을 토대로 유한요소해석을 추가로 시행하여 실험값과 해석값의 비교를 할 예정이다.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.1
• /
• pp.31-37
• /
• 2016

This paper intends to analyze the roles of regulations and certifications within the construction market that affect the effective recycling and application methods of construction waterproofing industries. Certifications, eco-labels, green certification patents, and new excellent technologies obtained in construction waterproofing industries are studied. In accordance to the study results, it was determined that, a total of 38 items obtained eco-labels with effective recycling as the theme, 10 items with green certifications, and 8 items with New Excellent Technologies. Regarding the types of effective recycled resources, most of them were concerned with composite-polymer(EVA, PVC, etc.) materials, waste tire powder, waste rubber, etc., which indicated that there is a clear limitation in the variety of the materials that are eligible for effective recycling in the construction waterproofing industries.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.7 s.238
• /
• pp.1005-1012
• /
• 2005

An OHT(Over Head Transportation) vehicle is an example of the industrial monorail vehicle, and it is used in the automobile, semiconductor, LCD manufacturing industries. OHT vehicle is moved by main wheels and guide rollers. The major function of the main wheel is to support and drive the OHT vehicle. The roles of the guide roller is the inhibition of derailment and steering of the OHT vehicle. Since the required vehicle velocity becomes faster and the required load capacity is increased, the durability characteristics of the wheel and roller, which was made of urethane, need to be increased. So it is necessary to estimate the fatigue life cycle of the wheel and roller. In this study, OHT dynamic model was developed by using the multi body dynamic analysis program ADAMS. Wheel and roller are modeled by the 3-D surface contact module. Especially, motor cycle tire mechanics is used in the wheel contact model. The OHT dynamic model can analyze the dynamic characteristic of the OHT vehicle with various driving conditions. And the result was verified by a vehicle traveling test. As a result of this study, the developed model is expected to predict wheel dynamic load time history and makes a contribution to design of a new monorail vehicle.

• The Journal of the Acoustical Society of Korea
• /
• v.11 no.4
• /
• pp.5-13
• /
• 1992

The vibration of a vehicle, which is caused by and transmitted from the engine, has significant effect on the ride comfort and the dynamic characteristics of the engine mount system has direct influence on the vibration and noise of the vehicle. This paper examines the body shake caused by the engine excitation force on engine key-off of a jeep by experiment and computer simulation using a general purpose mechanical system program, DADS. The computer simulation model consists of the engine, body including frame, and front and rear axles and each axle has right and left tires. The force element between body and suspension is modeled as a combination of suspension spring and damper, and the unsprung mass has roll and pitch motion. The body shake obtained from experiment was compared with the result of computer simulation. Parametric study of the body shake on engine key-off is performed with changing the stiffness of engine mount rubber, the engine mount installation angle and position of engine mounts by using the verified computer simulation model.