• Title/Summary/Keyword: 고로

Search Result 46,263, Processing Time 0.053 seconds

Strength Properties of SBR-Modified Concretes Using Ground Granulated Blast-Furnace Slag (고로슬래그 미분말을 이용한 SBR혼입 폴리머 시멘트 콘크리트의 강도특성)

  • ;;Yoshihiko Ohama
    • Journal of the Korea Concrete Institute
    • /
    • v.14 no.3
    • /
    • pp.315-320
    • /
    • 2002
  • The effects of slag content and polymer-binder ratio on the strength properties of the polymer-modified concretes using ground granulated blast-furnace slag and a styrene-butadiene rubber (SBR) latex are examined. As a result, the compressive, tensile and flexural strengths of the SBR-modified concretes using slag increase with increasing polymer-binder ratio and slag content, and maximized at a slag content of 40 %. In particular, the SBR-modified concretes with a slag content of 40 % provide approximately two times higher tensile and flexural strengths than unmodified concretes. Such high strength development is attributed to the high tensile strength of SBR polymer and the improved bond between cement hydrates and aggregates because of the addition of SBR latex.

Meaning and Computation of Completeness and Payment in SW Appraisal (SW감정에서 완성도와 기성고의 의미 및 산출 방법)

  • Yun, Young-Sun
    • Journal of Software Assessment and Valuation
    • /
    • v.15 no.2
    • /
    • pp.35-42
    • /
    • 2019
  • In this study, we reviewed the definition of completeness and payment in SW appraisal along to being complicated requirements of the appraisal, and we also presented their meaning and computation method. The completeness in SW appraisals means the degree of functional completion of the final product, and the payment refers cost spent to develop the product. Therefore, the completeness is evaluated based on the functions or interfaces of the final product, while the payment is calculated on the outputs or expenses of development steps. Recently, SW appraisal is complicated and the requirements for completeness and payment are changing. In this paper, we review the meanings and objectives of completeness and payment and present the evaluation methods for those.

Research on the Costume for the Folk Festivals of Chilseok-dong (칠석동 민속축제복식에 관한 연구)

  • Kim, Eun-Jung
    • Journal of the Korean Society of Clothing and Textiles
    • /
    • v.27 no.12
    • /
    • pp.1397-1404
    • /
    • 2003
  • 2002년 월드컵 전야제에서는 한국문화를 소개해 세계인의 환호를 받았는데 그 중에는 칠석동 민속축제인 고싸움놀이가 펼쳐졌다. 칠석동 민속축제는 일반 서민복식의 전통복 형태를 보여주는 복식(服飾)을 실제 착용하고 축제를 행하고 있으므로, 점차 사라져 가는 전통복식을 놀이문화를 통해 직접 확인할 수 있다는 점에서 연구가치를 갖는다. 본 연구의 목적은 국제화 시대에 우리 전통문화에 대한 정체성 확립을 위해 시대적 변화에 따라 변해 가는 민속복식을 무형문화재로 지정되어 있는 칠석동 고싸움놀이를 중심으로 시대적 흐름을 통한 고싸움놀이의 전수과정에서 형성되어 온 민속축제복식의 구성과 특성을 살펴보는데 있다. 연구방법은 광주지역인 광산구 칠석동 마을을 중심으로 자료조사와 현장조사를 병행하였다. 자료조사는 민속에 관련된 전공서적과 무형문화재 조사보고서, 행사팜플렛 등을 참고하였고, 현장조사는 고싸움 축제에 참가하여 복식 전반에 대한사진촬영과 마을축제 참여하는 마을사람들을 중심으로 축제복식에 관한 면담조사를 하였다. 칠석동 고싸움 축제복식은 행사가 진행되는 내용에 따라 크게 4가지로 분류할 수 있는데 본격적인 고싸움이 시작되기 전날 밤에 당산나무에 제를 지내는 당산제 복식, 마을의 평안과 고싸움의 흥을 돋우기 위한 농악복식, 고싸움이 시작되기 전에 아낙네들이 손과 손을 맞잡고 둥글게 돌며 화합을 다짐하는 강강수월래 복식, 한해 풍년을 기원하는 고싸움복식이 있다. 칠석동 고싸움 축제복식의 특성을 요약하면 다음과 같다. 첫째, 구성면에서는 농경제의(農耕祭衣)와 안택축원(安宅祝願的)을 기원하는 민속놀이축제복식으로 일상생활에 착용하는 복식을 이용한 농경 의례복의 다(多)기능성이 강조된 것으로 나타났다. 둘째, 색상은 우리조상의 백의(白衣)의 상징인 일상복인 백색 위에 오방색을 사용하여 화려하고도 강렬한 원색의 색상조화가 특징적으로 나타났다. 셋째, 형태면에서는 양쪽어깨와 허리선의 면 분할이나 비례를 통해 허리부분의 동작에 따른 유동적인 선이 부각되고 있다. 특히, 평면구성의 단조로움은 흔들리는 몸동작에 따른 고름의 율동미와 축제복식의 착장 방법에 따른 한국복식의 형태미를 보여주었다.

김해시 지상오존농도의 변화경향과 고농도 오존일에 대한 사례연구

  • 박종길;정우식;김재석;이대근;백종호
    • Proceedings of the Korean Environmental Sciences Society Conference
    • /
    • 2004.05a
    • /
    • pp.32-36
    • /
    • 2004
  • 본 연구는 최근 인구와 산업체가 급증하고 있는 김해시를 대상으로 김해시.군을 통합한 1996년 이후부터 2002년까지 김해시 지상오존농도의 변화경향과 고농도 오존일에 대한 사례 연구결과 다음과 같다. 김해시 대기오염농도의 시계열변화는 증가추세가 뚜렷하였으며, 최근 대기환경기준이 강화되면서 환경지정기준을 초과하기도 하였다. 계절별 오존농도의 일변화는 사계절 가운데 봄철이 가장 농도가 높게 나타났으며 매년 증가하는 농도폭도 가장 크게 나타났다. 이는 여름철의 경우 태양고도가 높고 단위시간당 일사량은 많으나, 장마와 같은 운량 증가로 인한 일사량의 감소되거나, 기온이 상승할 경우 해안으로부터 해풍이 증가하여 여름보다는 봄철에 더 높은 농도를 나타낸 것으로 생각되며, 인구와 자동차 등의 증가로 인한 배출량이 증가한 것도 크게 영향을 미친 것으로 생각된다. 연구기간동안 60 ppb 이상의 고농도 오존일의 총 발생빈도는 237일로 나타났으며, 매년 발생빈도가 증가하고 있으며, 대기환경기준 100 ppb/hr를 초과한 날도 8일이나 되었는데, 1999년이 4일 발생하여 오존에 의한 대기오염규제지역으로 선정되었는데, 고농도 오존일은 지난 1997년 이후 매년 증가하고 있으며 겨울을 제외한 전 월에 발생하는 특징을 나타내어 오존의 저감을 위한 실천 계획 수립뿐 아니라 고농도 오존일에 대한 집중적인 연구와 빠른 시간 내에 오존의 예.경보제를 도입 운영하는 것이 김해시민의 건강과 복지에 도움이 될 것으로 생각된다. 고농도 오존일에 대한 사례일 첫 번째인 5월 1일은 일 최고 기온은 그리 높은 상태는 아니었지만 광범위한 이동성 고기압에 의해 대기가 정체하고 바람이 약한 시점에 광화학반응에 의한 오존생성이 용이하였고 해안가의 높은 농도의 오존이 수송되어 고농도 오존이 발생하였으며, 사례 2의 경우 대륙에서 이동해 오는 이동성 고기압의 영향으로 대기는 안정하고 바람이 약하여 기온이 급상승하였으며, 광화학반응에 의한 오존 생성이 용이하였다. 사례 3의 경우는 남북으로 놓여 있는 대규모 기압계 사이에 안상부 형태의 대상고기압이 놓여 대기는 매우 안정하고 바람이 약하며 때때로 기압계에 의한 바람이 불 경우 다소 강한 바람이 불어 일사량이 많은 기압계에서 광화학반응과 수소에 의한 오존생성이 용이하여 고농도 오존을 발생하였다.

  • PDF

Effect of Anhydrite on the Mechanical and Durability Properties of High Volume Slag Concrete (무수석고 함량이 고로슬래그 미분말을 대량 활용한 콘크리트 특성에 미치는 영향)

  • Moon, Gyu-Don;Kim, Joo-Hyung;Cho, Young-Keun;Choi, Young-Cheol
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.2 no.3
    • /
    • pp.239-246
    • /
    • 2014
  • High volume slag concrete is attracting new attention and are thought to have promising potential for industrial applications, partly due to the climate debate, but especially due to their very low heat of hydration and their good durability in chemically aggressive environments. However, High volume slag concretes tend to have slower strength development especially. In this study, the effect of anhydrite ($CaSO_4$) on the mechanical and durability performance of high volume slag concrete were investigated. The main variables were anhydrite contents (0, 4, 6, 8, 10%). Test results show that 4~8% anhydrite concrete have improved engineering properties (hydration, compressive strength, shrinkage, creep, carbonation) as control concrete at early ages.

Evaulation of Adiabatic Temperature Rise for Concrete with Blast-Furnace Slag replacement (고로슬래그 미분말 치환율에 따른 콘크리트의 단열온도상승 평가)

  • Kim, Joo Hyung;Lee, Do Heun;Jung, Sang Hwa
    • Journal of the Korean Recycled Construction Resources Institute
    • /
    • v.8 no.1
    • /
    • pp.18-24
    • /
    • 2013
  • Recently, the interest is increasing about the eco-friendly concrete. Accordingly, the blast furnace slag(BFS), a by-product of industry is known for improving the durability through compaction in concrete and is expanding the use. The research about BFS in concrete be accomplished frequently. In this study, we should know the hydration characteristic of BFS concrete the through the adiabatic temperature rise test due to the replacement of a variety of BFS. In addition, we produced the regression analysis factors through the test result and analyzied the effect for the replacement of BFS. According to test results, the compressive strength showed a slight degradation or equal and the the adiabatic temperature rise figure and rising factors are went down for rising replacment of BFS. In the future, the study about the adiabatic temperature rise equation for the various replacement of BFS and binder is considered necessary.

  • PDF

A Study on the Heat Loss Reduction of a Refrigerator by Thermal Conductivity Change and Partial Removal of Rubber Magnet (냉장고 가스켓 주위 고무자석 재질 및 형상 변경에 따른 열손실 개선 연구)

  • Ha, Ji Soo;Ahn, Won Sul
    • Journal of Energy Engineering
    • /
    • v.23 no.4
    • /
    • pp.240-246
    • /
    • 2014
  • The present study has been carried out to reduce the heat loss from a refrigerator by changing thermal conductivity and partial removal of rubber magnet near refirgerator gasket. To perform this purpose, two dimensional heat transfer analysis for the horizontal cross sectional plane of a refrigerator has been accomplished. From the present study, it could be seen that the heat loss could be reduced nearly 7% by changing thermal conductivity of rubber magnet from 10W/mK to 1W/mK. The heat loss reduction, 17%, could be achieved by removal of rubber magnet near hotline and the effect on the heat loss reduction by partial removal of rubber magnet might be helpful for the refrigerator power consumption.

Properties of Reaction Rim on Blast Furnace Slag Grain with Alkali Activator according to Hydration Reaction (알칼리 자극제(刺戟劑)에 의해 고로(讀爐) 수쇄(水碎) 슬래그의 주위(周圍)에 형성(形成)된 Reaction Rim의 특성(特性))

  • Lee, Seung-Heun;Mun, Young-Bum
    • Resources Recycling
    • /
    • v.18 no.3
    • /
    • pp.42-48
    • /
    • 2009
  • Since there are $OH^-,\;[SiO_4]^{4-}$ ion of high concentration at early hydration in the system added with activator (NaOH+$Na_2OSiO_2$) in the blast furnace slag, different from cement hydration, hydration progresses fast without induction period and forms reaction rim around the blast furnace slag grain. $0.6{\mu}m$ reaction rim was formed around the blast furnace slag grain from the 1 day of reaction period, and the thickness of reaction rim increases over the reaction time, growing to $1{\mu}m$ on the 28 days. Unreacted blast furnace slag grain deformed from angular shape to the spherical shape. Mole ratio of Ca/Si tends to decrease from inside of blast furnace slag grain to reaction rim. Difference of Ca/Si mole ratio between reaction rim and inside the blast furnace slag grain decreased and generated hydrate was a poor crystalline CSH(I) with Ca/Si mole ratio less than 1.5.

Screening of Zero-Valent Metal for the Removal of High Concentration PCE and 1,1,1 TCA (고농도 PCE 및 1,1,1 TCA 제거를 위한 영가금속 선정)

  • Kwon, Soo-Youl;Kim, Young
    • Journal of Wetlands Research
    • /
    • v.12 no.1
    • /
    • pp.23-31
    • /
    • 2010
  • Chlorinated aliphatic hydrocarbons (CAHs) such as tetrachloroethylene (PCE), 1,1,1-trichloroethane (1,1,1-TCA) are the contaminants most frequently found in soil and groundwater. They have a potential to be toxic to and persistent in environment. This study is focused on selection of zero-valent metal and ores for the removal of high concentration PCE or 1,1,1-TCA and mixture of two compound. For the screening of suitable metals, we measured dechlorination rate, removal capacities and economics by using batch reactor test. This results suggest that removal rate and dechlorination of high quality iron and zinc are higher than slag and nature ores like zinc and manganese. Among nature ores, zinc ores(64% purity) have highest removal capacities. And in economics zinc ores is 10 times better than high quality metal tested. We conclude zinc ore is most suitable metal for the removal of PCE or 1,1,1-TCA.

Strength and Durability Properties of Concretes Using Ground Granulated Blast-Furnace Slag According to Steam Curing Types (고로(高爐)슬래그 미분말(微分末)을 사용한 콘크리트의 증기양생(蒸氣養生)에 따른 강도(强度) 및 내구특성(耐久特性))

  • Hong, Chang-Woo;Jang, Ho-Sung;Jeong, Won-Kyong
    • Resources Recycling
    • /
    • v.15 no.4 s.72
    • /
    • pp.52-59
    • /
    • 2006
  • The purpose of this study was to evaluate the effects of ground granulated blast-furnace slag on strength development and durability of ordinary portland cement concrete (OPC) with steam curing types. Main experimental variables were slag contents(0%, 10%, 30%, 50%, 70%) and curing types (standard, accelerated curing). It were performed to check the basic properties of concretes that compressive strength, rapid chloride ion permeability and chemical resistance. From the result, we have found that increasing the amount of blast-furnace slag produced concrete with increased compressive strength and permeability resistance. Rapid freezing-thawing test showed that they were good enough to protect the concrete structures and to carry out cyclic freezing and thawing. The freeze-thaw resistance of blast-furnace slag produced concretes maintained above 90% of relative dynamic modulus after 300 freezing-thawing cycles. Increasing the amount of blast-furnace slag produced concretes with increased chemical resistance.