• Journal of Korea Water Resources Association
• /
• v.41 no.12
• /
• pp.1219-1230
• /
• 2008

Stream inflows induced by flood runoffs have a higher density than the ambient reservoir water because of a lower water temperature and elevated suspended sediment(SS) concentration. As the propagation of density currents that formed by density difference between inflow and ambient water affects reservoir water quality and ecosystem, an understanding of reservoir density current is essential for an optimization of filed monitoring, analysis and forecast of SS and nutrient transport, and their proper management and control. This study was aimed to quantify the characteristics of inflow density current including plunge depth($d_p$) and distance($X_p$), separation depth($d_s$), interflow thickness($h_i$), arrival time to dam($t_a$), reduction ratio(${\beta}$) of SS contained stream inflow for different flood magnitude in Daecheong Reservoir with a validated two-dimensional(2D) numerical model. 10 different flood scenarios corresponding to inflow densimetric Froude number($Fr_i$) range from 0.920 to 9.205 were set up based on the hydrograph obtained from June 13 to July 3, 2004. A fully developed stratification condition was assumed as an initial water temperature profile. Higher $Fr_i$(inertia-to-buoyancy ratio) resulted in a greater $d_p,\;X_p,\;d_s,\;h_i$, and faster propagation of interflow, while the effect of reservoir geometry on these characteristics was significant. The Hebbert equation that estimates $d_p$ assuming steady-state flow condition with triangular cross section substantially over-estimated the $d_p$ because it does not consider the spatial variation of reservoir geometry and water surface changes during flood events. The ${\beta}$ values between inflow and dam sites were decreased as $Fr_i$ increased, but reversed after $Fr_i$>9.0 because of turbulent mixing effect. The results provides a practical and effective prediction measures for reservoir operators to first capture the behavior of turbidity inflow.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.1 no.1
• /
• pp.1-11
• /
• 1999

Rice yield and primary productivity (NPP) are dependent upon the variability of climate and soil. The variability and regionality of the rice yield and net primary productivity were evaluated with the meteorological data collected from Korea Meteorology Administration and the actual rice yield data from the Ministration of Agriculture and Forestry, Korea. The estimated NPP using the three models, dependent upon temperature(NPP-T), precipitation(NPP-P) and net radiation(NPP-R), ranged from 10.87 to 17.52 Mg ha$^{-1}$ with average of 14.69 Mg ha$^{-1}$ in the South Korea and was ranged 6.47 to 15.58 Mg ha$^{-1}$ with average of 12.59 Mg ha$^{-1}$ in the North Korea. The primary limiting factor of NPP in Korea was net radiation, and the secondary limiting factor was temperature. Spectral analysis on the long term change in air temperature in July and August showed periodicity. The short periodicity was 3 to 7 years and the long periodicity was 15 to 43 years. The coefficient of variances, CV, of the rice yield from 1989 to 1998 ranged 3.23 percents to 12.37 percents which were lower than past decades. The CV's in Kangwon and Kyeongbuk were high while that in Chonbuk was the lowest. The prediction model based on th e yield index and yield response to temperature obtain ed from the field crop situation showed reasonable results and thus the spatial distributions of rice yield and predicted yield could be expressed in the maps. The predicted yields was well fitted with the actual yield except Kyungbuk. For better prediction, modification should be made considering radiation factor in further development.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.701-710
• /
• 2004

Uncertainty was quantified to evaluate calcium determination result in infant formula with AAS (Atomic Absorption Spectrometry) and ICP-AES (Inductively Coupled Plasma-Atomic Emission Spectrometry). Uncertainty sources in measurand, such as sample weight, final volume of sample, sample dilution and the instrumental result were identified and used as parameters for combined standard uncertainty based on the GUM (Guide to the expression of uncertainty in measurement) and Draft EURACHEM/CITAC Guide. Uncertainty components of each sources in measurand were identified as resolution, reproducibility and stability of chemical balance, standard material purity, standard material molecular weight, standard solution concentration, standard solution dilution factor, sample dilution factor, calibration curve, recovery, instrumental precision, reproducibility, and stability, Each uncertainty components were evaluated by uncertainty types and included to calculate combined uncertainty. The kinds of uncertainty sources and components in the analytical method by AAS and ICP-AES were same except sample dilution factor for AAS. The analytical results and combined standard uncertainties of calcium content were estimated within the certification range $(367{\pm}20\;mg/100g)$ of CRM (Certified Reference Material) and were not significantly different between method by AAS followed by ashing and method by ICP-AES followed by acid digestion as $359.52{\pm}23.61\;mg/100g\;and\;354.75{\pm}16.16\;mg/100g$, respectively. Identifying uncertainty sources related with precision, repeatability, stability, and maintaining proper instrumental conditions as well as personal proficiency was needed to reduce analytical error.

• Journal of the East Asian Society of Dietary Life
• /
• v.17 no.6
• /
• pp.808-815
• /
• 2007

Four different herbs, including rosemary, oregano, basil and sage, along with green tea were individually added to ground beef at different percentages: 0.5, 1.0, and 1.5, respectively. The sensory qualities of the five natural herbs and their antioxidant effects were evaluated using Beef-Yukwonjeon. For the sensory evaluation results, the 0.5% herb addition and the control group generally showed higher acceptability scores than the 1.0% or 1.5% herb addition groups. In particular, the Yukwonjeon made with 0.5% green tea showed higher preferences in the acceptance tests and ranking tests. However, the sensory differences among samples were reduced after 3 days of storage at $6^{\circ}C$. For the results of lipid oxidation without storage, the TBARS values of the herb addition groups were slightly lower than the value of the control group, but not significantly(p>0.05). However, the antioxidant effects of each herb showed higher values over a longer storage period as well as at the higher herb concentrations. The antioxidant effects of the herbs during 7 days' of storage at $6^{\circ}C$ were evaluated as $10.0{\sim}38.5%$ reductions in TBARS values as compared to the group without herbs. Furthermore, the antioxidant effects of the herbs during 30 days' of storage at $-20^{\circ}C$ were shown as $16.8{\sim}27.8%$ reductions in the TBARS value. The green tea showed the highest antioxidant activity against lipid oxidation, because it was acceptable at higher concentrations in the sensory evaluation. These results indicate the potential to produce better quality beef-Yukwonjeon, with herbs, especially green tea.

• Korean journal of communication and information
• /
• v.46
• /
• pp.511-555
• /
• 2009

Media-related regulations can be classified into two categories; regulations of individual media contents and regulations regarding the entry to and withdrawal from a certain field. In this dissertation, ownership regulations are regarded as legal and political measures so as to prevent the monopoly and oligopoly of public opinion, and to secure its diversity. Every country has its own regulation model according to its particular media environment. Korea too is obliged to actively respond to its environmental changes, at the same time vitalizing the media industry and protecting consumers' rights and interests. Strong political intentions to protect the public interest is necessary when it comes to media regulation policies, especially in the circumstances that public interest is an industrial priority. As the convergence of broadcasting and telecommunications is leading to a major shift in the media industry, the regulation of cross-media ownership is an issue involving potential conflicts among media-owners, non-governmental organizations and the authorities concerned, depending on their various viewpoints regarding the media industry. In this paper, an attempt was made to search necessity of redefining 'public interest', which is the logic behind the restriction of cross-media ownership, and to reconceptualize issues on the centralization and diversity of media. First, an examination of the actual conditions of newspaper companies was carried out in order to reinvestigate domestic cross-media ownership issues, which is represented by the cross-ownership issue of newspapers and broadcasting stations. Next, the dilemma of policies stimulated by the fusion of media was discussed based on cross-media ownership restrictions, and the need for efficient conflict control was suggested. Finally, proposals on the independency and public confidence of media-related policy-making authorities, the rationalization of regulation models, an itemized discussion on cross-media ownership regulation issues, the elaboration of measures for a balanced development among media were made. It could be found that a number of foreign countries were still facing challenges to prevent monopoly and oligopoly of the public opinion and the industry. A solution to settle disagreements about the dilemma of the media industry, including the cross-media ownership regulation issues, must be arranged on the grounds of 'mutual respect of public interest and industrial interest', In Korea, an ease on the ownership regulations adapting to the change in the media industry may be considered, however the softening of the cross-media ownership regulations must be approached with the utmost care. Paradoxically Relieving cross-media ownership regulations may be considered the foundation of a richer field of journalism, where there is no need for concern over the monopoly and oligopoly of public opinion.

• Journal of Korea Water Resources Association
• /
• v.47 no.5
• /
• pp.459-468
• /
• 2014

Groyne to control the direction and velocity of flow in rivers is generally installed for the purpose of protecting riverbanks or embankments from erosion caused by running water. In particular, as interest in river restoration and natural river improvement increases, groynes are proposed as a key hydraulic structure for local flow control and riparian habitat establishment. Groynes are installed mainly in groups rather than as individual structures. In case of groynes installed as a group, flow around the groynes change according to spacing in between the groynes. Therefore, groyne spacing is regarded as the most important factor in groyne design. This study aimed at examining changes of flows around and within the area of groynes that take place according to the spacing of groynes installed in order to propose the optimal spacing for upward groynes. To examine flow characteristics around groynes, this study looked at flows in main flow area and recirculation flow area separately. In main flow area, it examined the impact of flow velocity increasing as a result of conveyance reduction that is exerted on river bed stability in relation to changes in the maximum flow velocity according to installation spacing. As a factor causing impacts on scouring and sedimentation within the area of groynes, recirculation flow in the groyne area can lead problems concerning flow within the area and stability of embankment. As for recirculation area, an analysis was conducted on the scale of rotational flow and the flow around embankment that exerts impacts on stability of the embankment. In addition, a comparative analysis was carried with reference to changes of the central point of rotational flow that occur within the area of groynes. As a result of compositely examining the results, the appropriate installation spacing is proposed as min. four times-max. six times considering a decrease in flow velocity according to the installation of upward groynes, river bed stability and stability of embankments against counterflow within the area of groynes.

• Journal of the Korea Concrete Institute
• /
• v.24 no.3
• /
• pp.293-303
• /
• 2012

Recently, as construction technology improved, concrete structures not only became larger, taller and longer but were able to perform various functions. However, if extreme loads such as impact, blast, and fire are applied to those structures, it would cause severe property damages and human casualties. Especially, the structural responses from extreme loading are totally different than that from quasi-static loading, because large pressure is applied to structures from mass acceleration effect of impact and blast loads. Therefore, the strain rate effect and damage levels should be considered when concrete structure is designed. In this study, the low velocity impact loading test of steel fiber reinforced concrete (SFRC) slabs including 0%~1.5% (by volume) of steel fibers, and strengthened with two types of FRP sheets was performed to develop an impact resistant structural member. From the test results, the maximum impact load, dissipated energy and the number of drop to failure increased, whereas the maximum displacement and support rotation were reduced by strengthening SFRC slab with FRP sheets in tensile zone. The test results showed that the impact resistance of concrete slab can be substantially improved by externally strengthening using FRP sheets. This result can be used in designing of primary facilities exposed to such extreme loads. The dynamic responses of SFRC slab strengthened with FRP sheets under low velocity impact load were also analyzed using LS-DYNA, a finite element analysis program with an explicit time integration scheme. The comparison of test and analytical results showed that they were within 5% of error with respect to maximum displacements.

• The korean journal of orthodontics
• /
• v.26 no.2 s.55
• /
• pp.205-218
• /
• 1996

A given facial type can be considered as a syndrome in which various features are aggregated, so a single parameter is not sufficient to accurately identify a given facial type. This study was designed to identify & characterize the skeletal types that blend under the headline-'Cl III,deepbite'. Cephalograms of thirty-four untreated mixed dentition patients, selected mainly on the basis of clinical impression of Cl III with reduced lower face heights were studied. The following conclusion can be drawn. 1. Cl III malocclusion with reduced lower face height could be classified into three types. 2. Subtype 1 was identified by the following features : strong ramus, more anteriorly positioned upper molars without alveolar hypoplasia, acutely reduced Mn. plane angle. 3. Subtype 2 was characterized by a short ramus, sharply reduced postrior alveolar height, and normal Mn. plane angle. In general, this type had hypoplasia tendency in the vertical dimension. 4. In subtype 3, the AUFH occupying more percentage than ALFH was a outstanding feature. Ramal height was in normal range, alveolar hypoplasia and slightly reduced Mn. plane angle was observed. 5. The features of the subtypes were reflected in certain indices, which can be regarded as discriminative index. LAFH: if reduced, regardless of subtypes, indicates reduced lower ant. face height consistently. FHR: when this ratio is increased, it indicates subtype 1. FHI: when this ratio is in normal range, it indicates subtype 2. FPI: if reduced greatly, it indicates subtype 3.

• KOMUNHWA
• /
• no.70
• /
• pp.63-88
• /
• 2007

The purpose of this writing is to examine the places and instruments of the dissection for deformed animal carcasses excavated in shellfish stacks of the period of the Proto-Three Kingdoms(삼한) and the Three Kingdoms(삼국). The remains were chosen, which had been excavated and finished in the analysis of the animal carcasses, and the main objects are all shells and deer, especially among Mammalia. As the result, the dissection of shells was not taken place in the habitats of the animals, but inside or around of the residence of the people. For deer, too, it was done in the public place or specific area around and inside the residence. As concerns the method of dissection for shells, for Pelecypoda(부족류), represented by Meretrix lusoria(백합), the inner meat was taken out by wrenching the shell with a kind of small knives, or by boiling, and sometimes by cracking the middle of the shell in the case of big Meretrix lusoria and Dosinorbis japonicus(떡조개). For Rapana venosa(피뿔고둥), representative of Gastropoad(배발류), the people broke the top or some parts of the body to get the inner meat or used some kind of needles and stylus to pick the inner meat out after boiling. Abalones‘ meat was attached firmly to the shell, so very sharp and proper metal instruments were used to take the meat out Relatively small-sized Reishia clavigera(대수리),Top shell(밤고둥) meats were taken out by breaking the top parts after boiling, then sucking the meats, or by picking them out by using needles and stylus in the original shape. In the case of large Mammalia like deer, in the full consideration of the point that deer itself are used in various ways, they were dissected in the order of skinning, taking out the internal organs, cutting front and rear legs, separating joint parts and meats, extracting bone-marrow by 철정, 철부, ironed hand knife in very delicate ways. It seems that skinning, and front and rear legs' cutting were taken place in the place around the residence, on the other hand joint parts' separating and bone-marrow extracting in the residence. The tools for the dissection were confirmed to be hand-knife, honed ax, hammer stone, bondstone, needles and stylus, and some other sharp instrument. They were used properly according to objects.

• KOMUNHWA
• /
• no.70
• /
• pp.163-178
• /
• 2007

Among many functions of the museum, the educational function is being emphasized. Museums should actively expand their scope of action through special exhibits or various educational activities. It is through exhibits that museums prove their reason for existence and raise calls for support. Through such activities, university museums should demonstrate the role and reason of existence of a museum inside a university to the members of the university. They should carry out various activities to raise the presence of the museum in the university. That may be the way for university museums, which face many difficulties in reality, to find their breakthrough. Especially in a situation of a low-budget, holding overseas exhibition may be a good opportunity to display the excellence of the Korean culture and, at the same time, publicize the school and the museum. Also, through such overseas exhibition, benchmarking of facilities and activities of advanced museums can be made and networks can be set up with museums around the world. This paper introduces the planning and progressing procedures of exhibitions abroad through the experiences of the Korea University Museum. I sincerely hope that it will contribute to the hereafter development of university museums. Aside from such overseas exhibition, the Korea Foundation has been supporting prestigious foreign museums to establish a Korean exhibition room in order to form a perpetual space to systematically introduce Korean culture and art to foreign audience. Thus far, the National Museum of Korea has stood in the forefront in lending relics to Korean exhibition rooms abroad. I believe it would be a worthwhile activity for the Korea Association of University Museums, which has approximately 100 institutions as its members, to actively participate in the establishment of Korean exhibitions rooms of foreign museums for the development of university museums. Participating in the establishment of Korean exhibition rooms is attractive as it will lead to a constant exchange with foreign museums instead of a one-time exchange. Localization and globalization, which became a big issue about ten years ago, is reality from which university museums cannot be free. In such reality, it is time for university museums to look back on whether they are ready to make their way forward in this era called the century of culture.