• Journal of the Korean Electrochemical Society
• /
• v.22 no.2
• /
• pp.69-78
• /
• 2019

Lithium metal anode with the highest theoretical capacity to replace graphite anodes are being reviewed. However, the dendrite growth during repeated oxidation/reduction reaction on lithium metal surface, which results in poor cycle performance and safety issue has hindered its successful implementation. In our previous work, we solved this problem by using surface modification technique whereby a surface pattern on lithium metal anode is introduced. Although the micro-patterned Lithium metal electrode is beneficial to control Li metal deposition efficiently, it is difficult to control the mossy-like Li granulation at high current density ($>2.0mA\;cm^{-2}$). In this study, we introduce vinylene carbonate (VC) electrolyte additive on micro patterned lithium metal anode to suppress the lithium dendrite growth. Owing to the synergetic effect of micro-patterned lithium metal anode and VC electrolyte additive, lithium dendrite at a high current density is dense. As a result, we confirmed that the cycle performance was further improved about 6 times as compared with the reference electrode.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.8A
• /
• pp.648-660
• /
• 2012

The low-power, low-cost femtocell network has been proposed not only to alleviate traffic load to the macro base station (eNB) but also to cover the indoor coverage hole problem. However, in the dense femtocell environment where many femtocells are deployed to cover the whole large office building, performance of such femtocell environment can be deteriorated due to severe co-channel interference problem between the eNB and femtocells and among neighboring femtocells. In particular, a macro UE(mUE) located within femtocell coverage may experience severe co-channel interference from surrounding femtocells. Therefore, In this paper, we propose a novel power control schemes to mitigate interference to a mUE under such dense LTE femtocell environment. With proposed femtocell power control schemes, performance of the mUE can be greatly improved in terms of the outage probability and the SINR while maintaining satisfying femtocell performance. Simulation based performance study shows that the proposed power control scheme is able to enhance mUE performance more than 30% than the conventional dense femtocell in terms of the two performance metrics.

• Food Science and Preservation
• /
• v.10 no.1
• /
• pp.28-31
• /
• 2003

For safe storage of agricultural products in the cold storage house, accurate monitoring of temperature, humidity and gas conditions is necessary. This study was conducted to develop an environmental monitoring and warning system for the cold storage house to improve safety of storage. The system developed in this study is able to monitor temperature, humidity and $CO_2$concentration in the storage house and to send alarm signal to the farmer by telephone and beeper when abnormal conditions have been occurred in the storage house. And the developed system use internet network so we can supervise storage conditions in the home. From the results of the performance test, it was found that the temperature and relative humidity can be controlled within the range of 0.5$^{\circ}C$ and $\pm$2 percent. And farmer's response was fair.

• Clean Technology
• /
• v.20 no.4
• /
• pp.398-405
• /
• 2014

In the treatment of spent high energetic materials, the issues such as environmental pollution, safety as well as working capacity should be carefully considered and well examined. In this regard, incineration has been recommended as one of the most promising processes for the disposal of such explosives. Due to the fact that high energetic materials encompass various types and their different characteristics, the technology development dealing with various materials is not an easy task. In this study, rigorous modeling and dynamic simulation was carried out to predict dynamic physico-chemical phenomena for research department explosive (RDX). Plug flow reactor was employed to describe the incinerator with 263 elementary reactions and 43 chemical species. Simulation results showed that safe operations can be achieved mainly by controlling the reactor temperature. At 1,200 K, only thermal decomposition (combustion) occurred, whereas increasing temperature to 1,300 K, caused the reaction rates to increase drastically, which led to ignition. The temperature further increased to 3,000 K which was the maximum temperature recorded for the entire process. Case studies for different operating temperatures were also executed and it was concluded that the modeling approach and simulation results will serve as a basis for the effective design and operation of RDX incinerator.

• 한국생물공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.404-408
• /
• 2003

In this study, hydrogen gas produced by anaerobic mocrobial at anaerobic condition. To maintain the high MLSS concentration, anaerobic sludge was transformed to granular sluge by adding both high molecular cationic polymer(M.W>5,000,000) and silica sol. Hydrogen production was easily distributed, which seemed caused by methane producing microbial. Even low pH control(pH<5.5) was not the effective mean to block methane producing microbial. To decrease of $H_2$ production was closely related with the inclose of $CH_4$ production. Other mean expect for pH control must be devised for the efficient $H_2$ production.

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.339-342
• /
• 2003

In this study , hydrogen gas produced by anaerobic mocrobial at anaerobic condition. To maintain the high MLSS concentration, anaerobic sludge was transformed to granular sluge by adding both high molecular cationic polymer(M.W.>5,000,000) and silica sol. Hydrogen production was easily distributed, which seemed caused by methane producing microbial. Even low pH control(pH<5.5) was not the effective mean to block methane producing microbial. To decrease of $H_2$ production was closely related with the inclose of $CH_4$ production. Other mean expect for pH control must be devised for the efficient $H_2$ production.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2006.05a
• /
• pp.752-757
• /
• 2006

유역 내의 지속적인 개발과 도시화로 유출량이 증가하면서 하도의 통수능을 초과하게 됨에 따라 제방을 증고하게 되고 특히 하류부로 갈수록 유량의 급격한 증가로 제방고를 높여야 하는 악순환이 반복되었다. 이에 따라 유역의 홍수량을 하도 이외의 유역 내에서 분담하고 하도 중심의 치수 대책이 아닌 유역 전체에서 홍수를 제어해야 한다는 유역종합치수대책이 중요한 대안으로 떠오르고 있다. 유출저감시설은 이미 개발된 도시유역의 홍수량을 조절하는 데 유용할 뿐 아니라 새롭게 개발이 시행되는 유역에서는 개발로 인한 홍수 증가량을 분담하는 수단으로써 필수적으로 설치되어야 한다. 최근에는 일률적으로 임시 및 상시 저류지 등의 빈도설계를 통하여 개발 이후의 첨두유량이 개발 이전의 첨두유량 보다 크지 않도록 우수배제시스템을 설계하고 있으나 저류지와 같은 유출저감 시설을 유역출구에 설치함으로써 첨두유량만을 개발이전의 수준으로 유지할 뿐 여전히 유출량의 증가 및 홍수 도달시간이 빨라지는 문제점을 근본적으로 해결하지 못하고 있다. 본 연구에서는 현행 재해영향평가제의 법적 테두리안에서 개발사업으로 인한 증가된 홍수 저감대책을 수립하는 과정에서 몇가지 개선방안을 제시, 연구하고자 한다. 즉, 사업지구 하류하천 규모를 감안한 저류지의 적정 설계빈도의 채택과 저류지의 다목적 이용방안에 대해 검토하여 홍수재해로부터 안전하고 환경친화적인 개발사업이 될 수 있는 방안을 제시코자 한다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.3
• /
• pp.200-204
• /
• 2001

The structural design and the measured characteristics of optical signal amplification unit for 640 Gbps (10 Gbps$\times$64 ch.) WDM transmission systems are reported. The unit is composed of two sub gain block units for the amplification of C-band (1530-1560 nm) and L-band (1570-1600 nm), respectively. Programmable microprocessors monitor the states of operation and optimize the optical output conditions. Each sub gain block unit can maintain total optical output power of +21 dBm with gain flatness of < 1 dB and noise figure of <7.2 dB for the input power in the dynamic range from-5 to +1 dBm.+1 dBm.

• 열병합발전
• /
• s.69
• /
• pp.15-20
• /
• 2009

소수력 계획 시 개발지점에 대하여 수많은 자료와 정보 등을 필요로 하게 되는데 특히 해당지역내의 유량분포에 대한 유황자료는 개발의 판단여부를 결정케 하는 중요한 요소이다. 소수력발전소의 설비용량에 직접 관계되는 설계유량의 결정과 재해방지를 위한 유출의 예측을 가능케 하고 발전소운영 시 가동률 및 경제성에도 직접적인 영향을 미치는 중용한 요소이나 여기서 논하는 소수력개발은 하천이나 댐과 같은 유형이 아니라 일정한 유량을 확보하여 배출하기 때문에 문제는 없다. 그러나 계절별 부하에 따른 냉각수량의 변화 및 소수력 발전유량의 변동, 조위(해수면) 변화 등에 따라 달라진다. 그러므로 수위조절을 위한 수문은 이들의 변화에 따라 자동운전이 가능해야 하지만 운전시 발전정격수위를 맞출 수 있도록 수문을 조절한 다음 Turbine Governor에 의해 유량 및 수위를 제어할 수 있도록 설계하여 냉각수 순환수 계통에 영향이 미치지 않게 언제나 적정수위를 유지시킬 수 있는 운전모드로 구축하는 것이 안정이라 볼 수 있다. 소수력발전설비 및 수문의 오작동 및 고장이 발생할 때 수위가 상승하여 냉각계통에 손실수두 증가, 취수펌프의 양정고 증가와 Surge 발생 등으로 발전소의 정상 운전에 미치는 영향이 없어야 하므로 세밀한 검토가 필요하기 때문에 폐쇄시간과 수압상승 값 등 요인 분석후 설계하여야 한다. Figure A와 같이 국내 화력발전단지에서 냉각수로 사용되고 방류되는 해수는 발전소에 따라 ca.70~150 CMS로 ca.2,000~5000 kW 이상의 수력에너지(H=4m 형성 기준)를 보유하고 있으나, 현재 활용되지 못하고 그대로 해양으로 방류되고 있어 이 수력에너지의 개발 방안을 오래전부터 검토하여 왔다. 발전소 온배수의 원활한 배수를 위한 설계 낙차와 함께 남서해안의 조위변화에 따른 낙차를 이용하는 것으로 소수력 발전 방식과 조력발전 방식의 특징을 동시에 활용할 수 있다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.12 no.6
• /
• pp.75-81
• /
• 2012

In this paper, we design and implementation of effective integrated broadcast contents transmission System based on single server system. Because of previous broadcast contents transmission system is consist of various individual functional equipment. And it is not easy to use and not effective to manage for broadcast contents transmission. In this paper, we evaluated and analysed of developed system in the test environment. As a result of performance test, It showed that it was well performed without any data error in the performance test, and It showed that it was well managed, controled, scheduled, processed of the integrated broadcast contents transmission environment.