• Journal of Korean Society of Environmental Engineers
• /
• v.31 no.10
• /
• pp.909-918
• /
• 2009

As a part of dissolved organic matter, dissolved organic carbon (DOC) or biodegradable DOC (BDOC) fraction in particular is one of important issues in water treatment. Due to role as a nutrient source for bacteria, BDOC, therefore, may cause regrowth problems in water distribution system. The main objectives of this study were to investigate the possibility to minimize the concentration of BDOC in advance water treatment process. DOC in water is fractionized into four fractions such as AnBDOC (adsorbable and non-biodegradable DOC) which possesses adsorption properties but no biodegradation ability; nABDOC (biodegradable and non-adsorbable DOC) which has biodegradation properties but no adsorption ability; ABDOC (adsorbable and biodegradable DOC) which has adsorption properties and biodegradable characteristic; and non-removal DOC (nAnBDOC) which do not have either adsorbability or biodegradability. BAC process was effective for adsorbable DOC (AnBDOC+ABDOC) removal. However, in some cases, the removal ratio of adsorbable DOC was not sufficient. BDOC removal rate is very low or irremovable. Thus, for the control of residual DOC, it is necessary to change the operation condition by BAC process. From the analysis results of DOC fractions, water treatment processes appeared to be effective because it could grasp a remarkable amount of biodegradable, adsorbable and non-removal DOC. The concentration of AOX in non-prechlorination process was reduced from 7.1 ${\mu}g$/L to 0.51 ${\mu}g$/L in BAC process followed by ozonation.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.2
• /
• pp.437-447
• /
• 2020

The purpose of this study is to research the countermeasures and expected effects through the use of drones in the field of disaster prevention as a drone-based smart quarantine performance method. The environmental, market, and technological approaches to the review of the current quarantine performance task and its countermeasures are as follows. First, in terms of the environment, the effectiveness of the quarantine performance business using drone-based control is to broaden the utilization of forest, bird flu, livestock, facility areas, mosquito larvae, pests, and to simplify and provide various effective prevention systems such as AI and cholera. Second, in terms of market, the standardization of livestock and livestock quarantine laws and regulations according to the use of disinfection and quarantine missions using domestic standardized drones through the introduction of new technologies in the quarantine method, shared growth of related industries and discovery of new markets, and animal disease prevention It brings about the effect of annual budget savings. Third, the technical aspects are (1) on-site application of disinfection and prevention using multi-drone, a new form of animal disease prevention, (2) innovation in the drone industry software field, and (3) diversification of the industry with an integrated drone control / control system applicable to various markets. (4) Big data drone moving path 3D spatial information analysis precise drone traffic information ensures high flight safety, (5) Multiple drones can simultaneously auto-operate and fly, enabling low-cost, high-efficiency system deployment, (6) High precision that this was considered due to the increase in drone users by sector due to the necessity of airplane technology. This study was prepared based on literature surveys and expert opinions, and the future research field needs to prove its effectiveness based on empirical data on drone-based services. The expected effect of this study is to contribute to the active use of drones for disaster prevention work and to establish policies related to them.

• Tuberculosis and Respiratory Diseases
• /
• v.63 no.2
• /
• pp.165-172
• /
• 2007

Background: The pathogenesis of lung cancer includes the accumulation of multiple genetic abnormalities. The CREB-binding protein(CBP) is one of several transcriptional co-activators among various sequence-specific DNA-binding transcription factors. CBP is involved in a wide range of cellular activities, such as DNA repair, cell growth, differentiation, and apoptosis that are suspected of contributing to tumorigenesis. The goal of this study was to evaluate CBP expression in a series of human lung tissues containing normal epithelium, premalignant lesions(hyperplasia and dysplasia) and squamous cell carcinomas. Materials and Methods: Immunohistochemical staining was performed on formalin-fixed paraffin-embedded sections by use of a monoclonal anti-CBP antibody. CBP expression was compared in samples from 120 patients with premalignant and malignant histological types including 20 metaplastic specimens, 40 dysplastic specimens, and 60 squamous cell carcinomas in the lung. Results: CBP expression was seen in 35% (7/20) of the metaplastic specimens. 65% (26/40) of the dysplastic specimens, and 70% (42/60) of the squamous cell carcinomas (p<0.05). According to celluar atypism, CBP expression was 50% (10/20) of the low-grade dysplastic specimens and 80% (16/20) of the high-grade dysplastic specimens(p <0.01). By cellular differentiation, CBP expression was seen in 95% (19/20) of the well differentiated squamous cell carcinomas, 85% (17/20) of the moderately differentiated carcinomas and 30% (6/20) of the poorly differentiated lesions (p <0.05). Conclusion: These results suggest that CBP may have an important role in malignant transformation of precancerous lung lesions and may be a marker for malignancy.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.12 no.4
• /
• pp.175-189
• /
• 2017

Science and technologies develop rapidly and in conditions where it is difficult to predict both domestically and abroad, the rapidly changing business environment demands innovation. To strengthen the businesses' competitive edge, the key challenge is not to control but rather grant autonomy, allowing it to anticipate the future and actively deal with. This will allow to train and manage talented people with competence and abilities, which all links to the concept of the Super Leadership. Currently, our society is in the change due to the Fourth Industrial Revolution wave and paradigm related with high-tech industry, hence is in desperate need for creativeness and speed management. It is a time where risk and challenges coexist and is not a standardized environment. Businesses must make efforts in managing human resources and allow them to have leaderships compatible with the current era, giving them opportunities to face challenges. The necessity for Super Leadership is emphasized especially in the industry-orientated era, where new revolutionary technologies are emerging and existing technologies are being advanced and maximized, to cultivate the potentials of the members and secure competitive superiority for the best management and creation. Therefore, in this research, the empirical analysis of the relationship between Super Leadership of small and medium enterprises and the business outcome was conducted. Research outcome states that, in order to create a sustainable business outcome, enterprises need to invest more in developing leaderships and in accordance with it, promote talent. In order to survive and sustain growth in the period of endless competition like today, it is concluded that it is imperative to establish a powerful Super Leadership that will endeavor to engage and maximize the competence of members of the organization.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1977.06a
• /
• pp.5.2-5
• /
• 1977

Many persons, both children and adults, suffer from impaired hearing. The handicaps that arise from this are economic, educational and above all, social. These persons need help, both medical and educational. In order to plan facilities for the medical treat ment, the rehabilitation, and the special education required by those with impaired hearing, we must know how many persons with hearing problems there are and the severity of their handicaps. The first step in knowing these is to devide hearing impairent into categories of handicap. Historically, since Beasley (1940) proposed progressive stages of deafness in terms of social disability, there was no well organized classification. of hearing handicap except related material from Huzing (1959) and Silverman (1960). In 1965, Goodman advocated a guide hearing threshold levels and degres of relating hearing impairment. During recent one year, on the bases of Goodman classification of hearing impairment and the report from Illinois Comission on children (1968), we have studied about hearing handicaps and speech life for the 180 cases, who visited to our otolaryngology department with hearing impairment. Now, we report the results of study with the referred references.

• Journal of Oral Medicine and Pain
• /
• v.36 no.3
• /
• pp.161-167
• /
• 2011

Sialolith is one of the most common pathologic conditions found in the salivary glands. The mechanisms responsible for the formation of sialoliths have not been elucidated so far. In this article, the chemical composition and micromorphology of a sialolith of a 58-year old female patient suffering from chronic sialoadenitis of the submandibular gland was analyzed using scanning electron microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDX). In a SEM evaluation, the highly mineralized amorphous core surrounded by lamellar and concentric structures was revealed, however no foreign body, organic material, or signs of microorganism were observed in the core of the sialolith. EDX analysis showed the central core was composed of only Ca, O and P, and that a high level of C was detected near the central area as well. These results indicated that the inorganic composition of the sialolith was hydroxyapatite crystals, and that inorganic and organic substances existed around the central cores. This study suggests that the sialolith was composed mainly of hydroxyapatite crystals and the formation of the nucleus of the sialolith in the submandibular gland duct was secondary to sialadenitis, which favors the growth of an inorganic crystalline nucleus.

• The Journal of the Convergence on Culture Technology
• /
• v.6 no.4
• /
• pp.813-818
• /
• 2020

Recently, with the rapid increase in technology and users of smart devices, the smart watch market has grown, and its utility and usability are continuously expanding. The strengths of smartwatches are wearable portability, application immediacy, data diversity and real-time capability. Despite these strengths, smartwatches have limitations such as battery limitations, display and user interface size limitations, and memory limitations. In addition, there is a need to supplement developers and standard devices, operating system standard models, and killer application modules. In particular, monitoring and application of user's biometric information is becoming a major service for smart watches. The biometric information of such a smart watch generates a large amount of data in real time. In order to advance the biometric information service, stable peer-to-peer transmission of sensing data to a remote smartphone or local server storage must be performed. We propose a synchronization method to ensure wireless remote peer-to-peer transmission stability in a smart watch system. We design a wireless peer-to-peer transmission process based on this synchronization method, analyze asynchronous transmission process and proposed synchronous transmission process, and propose a transmission efficiency method according to an increase in transmission amount.

• Proceedings of the Safety Management and Science Conference
• /
• 2003.05a
• /
• pp.43-51
• /
• 2003

제품 설계 및 디자인의 과정이 고도로 높은 기술력을 바탕으로 이루어지고 있으며, 국내의 기업체도 우수한 기술력과 높은 품질로 경쟁력을 키우며 다양한 고객의 요구에 대응하여 고객만족을 꾀하여야 한다 이의 기반이 되는 제품의 품질과 사양은 설계에서 시작되는데 아직 국내의 많은 기업들은 설계 및 제작 단계에서 많은 시간과 비용을 낭비하고 있다. 3D Modeling Solution은 설계오류가 적으며 시각적인 설계를 할 수 있어 최소의 인력으로 제품을 설계할 수 있는 장점이 있지만 너무 많은 기능으로 인해 사용자가 쉽게 적용하고 사용하기 어려운 단점을 가지고 있다. 본 연구에서는 이러한 산업현장의 어려움을 덜기 위해 3D 전용 Modeling Solution에 사용자가 쉽게 부품을 조림할 수 있는 엔진을 접목시켜 누구나 사용가능하고 신속한 신제품 개발이 이루어지도록 하였다. 본 연구에서는 Autodesk사의 Inventor와 Microsoft Visual Basic으로 Inventor에서 제공하고 있는 API함수를 이용하여 조립자동화를 위한 조립조건 생성, 조립자동화, 부품 재질변경, 수동조립 그리고 부품의 DB화를 구현하였다. 이 프로그램은 조립조건 설정 폼을 이용하여 부품의 조립속성을 생성하고 부품조립 폼을 이용하여 조립자동화를 실행할 수 있도록 하였다. 또한 모든 부품을 Database화 하여 부품을 손쉽게 탐색할 수 있으며, 추후에도 언제든지 재사용이 가능하여 제품설계 효율성을 극대화 할 수 있다. 현장 적용 시 신속한 신제품 개발과 품질의 우수성으로 고객만족을 꾀할 수 있으며, 시간과 비용을 동시에 줄여 경쟁사와의 경쟁우위를 높이는 해결책이 될 수 있다.-110 마이크로프로세서와 21285 주제어기가 장착된 EBSA-285 보드이다. 측정하면서 수행하였다. 검증 결과 random 상태에서는 문헌자료에 부합되는 예측결과를 보여주었으나, intermediate와 constant 상태에서는 문헌보다 다소 낮은 속도를 보여주었다 이러한 속도차는 추후 현장 데이터를 수집하여 보다 실질적인 검증을 통하여 조정되어야 할 것으로 판단된다.지발광(1.26초)보다 구애발광(1.12초)에서 0.88배 감소하였고, 암컷에서 정지발광(2.99초)보다 구애발광(1.06초)에서 0.35배 감소하였다. 발광양상에서 발광주파수는 수짓의 정지발광에서 0.8 Hz, 수컷 구애발광에서 0.9 Hz, 암컷의 정지발광에서 0.3 Hz, 암컷의 구애발광에서 0.9 Hz로 각각 나타났다. H. papariensis의 발광파장영역은 400 nm에서 700 nm에 이르는 모든 영역에서 확인되었으며 가장 높은 첨두치는 600 nm에 있고 500에서 600 nm 사이의 파장대가 가장 두드러지게 나타났다. 발광양상과 어우러진 교미행동은 Hp system과 같은 결과를 얻었다.하는 방법을 제안한다. 즉 채널 액세스 확률을 각 슬롯에서 예약상태에 있는 음성 단말의 수뿐만 아니라 각 슬롯에서 예약을 하려고 하는 단말의 수에 기초하여 산출하는 방법을 제안하고 이의 성능을 분석하였다. 시뮬레이션에 의해 새로 제안된 채널 허용 확률을 산출하는 방식의 성능을 비교한 결과 기존에 제안된 방법들보다 상당한 성능의 향상을 볼 수 있었다., 인삼이 성장될 때 부분적인 영양상태의 불충분이나 기후 등에 따른 영향을 받을 수 있기 때문에 앞으로 이에 대한 많은 연구가 이루어져야할 것으로 판단된다.

• Journal of the Society of Disaster Information
• /
• v.13 no.3
• /
• pp.305-312
• /
• 2017

In our society, the advanced, advanced, and information industries have continued to grow and now live in the era of the fourth industrial revolution. As the industry develops, the load of the users has also increased so much that it is deepened by the energy shortage phenomenon and the construction of additional energy facilities is required. Therefore, energy plant construction work is being actively carried out in the coastal area. In particular, it is common to build a plant in the ground by filling the coast with soil in other regions, reflecting the fact that Korea is lacking in the country when constructing power plants, gas and petrochemical plants. Current domestic grounding designs are designed or constructed to suit only the use of grounding resistors based on the electrical equipment design technical standards. However, in the case of a plant facility constructed in the untested buried soil, when the lightning current and the abnormal current are inputted, the facility operator or the user due to the elevation of the ground potential is seriously exposed to the risk of electric shock disaster. In this paper, we analyze the ground resistivity of the landfilled soil and use a computer program (CDEGS) based on KS C IEC 61936-1, We analyze the contact voltage and stratification voltage and propose a grounding design optimized for plant installation.

• Resources Recycling
• /
• v.18 no.2
• /
• pp.3-15
• /
• 2009

To accomplish the greenhouse gas reduction which is over core unit project of the "Green growth" policy and "Resource circulation society", it is important to maintain proper balance and complement between energy recovery from waste and material recycling. This research(study) examined the related policies on the past of korea and foreign country, and also "The 4th resource recycling master plan" and "Energy recovery from waste plan" to provide advisable direction for resource recycling policy. The results of the research(study) showed that there were no significant difference between korea and developed foreign countries waste management policies. But in German policy, energy recovery from waste and pre-treatment are importantly considered and highly required for permission. Under current circumstance in korea, recycling will be more difficult than in the past. According to "The 4th resource recycling master plan", film type of synthetic resin was not sustainable recycled material in substance."Energy recovery from waste plan", proved that the energy recovery from RDF/RPF have lower efficiency than regular incineration generation and substance recycling. To solve these problems, the energy and remainder heat recovery must be generalized to "Energy recovery" concept and institutional improvement such as LCA(Life Cycle Assessment) system are need to support it. And also technology development to extract synthetic polymer by dissolved film type of synthetic resin must be provided.