• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2001.06a
• /
• pp.139-142
• /
• 2001

국지기온 결정인자 가운데 특히 고도의 영향이 현저하므로 비관측점과 공간내삽에 사용되는 주변 관측점간 표고편차를 기온감율에 의해 보정해주는 간단한 방법은 상대적으로 복잡한 다른 기법들에 비해 우수한 결과를 보인다 (Nalder and Wein, 1998). 지구대기의 건조단열감율은 -0.0098$^{\circ}C$m$^{-1}$로 상수이지만, 수증기로 포화된 대기의 기온감율은 지표 부근의 -0.004$^{\circ}C$m$^{-1}$부터 대류권 중간의 -0.007$^{\circ}C$m$^{-1}$를 거쳐 권계면 부근에서는 건조단열감율과 거의 같아진다 (Wallace and Hobbs, 1997).(중략)

• Bulletin of the Korean Space Science Society
• /
• 2009.10a
• /
• pp.27.2-27.2
• /
• 2009

SLR (Satellite Laser Ranging) 데이터의 높은 거리측정 정밀도는 위성 추적 시스템의 검증 및 보정, 위성의 정밀궤도결정, 지구와 관련된 물리 상수 및 모델 검증, 우주파편과 같은 우주물체의 추적 및 감시 등에 활용이 가능하다. 특히 위성의 정밀궤도결정에 SLR 데이터를 활용하는 것은 고정밀 지구관측 위성 및 독자적인 항법 시스템 운영에 필수적인 부분이다. SLR 시스템은 위성 관측 가능 시간 및 지역이 한정되어 있기 때문에 정밀궤도 결정에 활용하는 것이 쉽지 않다. 따라서 이 연구에서는 SLR 데이터를 사용하기 위한 효율적인 정밀궤도결정 전략에 대해서 알아보았다. 동역학 및 관측 모델, 지상국의 개수, 초기 궤도 오차, 필터링 방법, 고도각에 따른 관측 데이터 선택 등의 기준을 선정하고 각각의 경우에 대해 정밀궤도결정을 수행하고 결과를 분석하였다. 정밀궤도결정 테스트를 위해서는 YLPODS (Yonsei Laser-ranging Precision Orbit Determination System)과 SLR정규점 (Normal Point) 데이터를 사용하였다. 이를 통해서 SLR 데이터를 사용하기 위한 효율적인 정밀궤도결정 전략에 대해 고찰해보았다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2017.05a
• /
• pp.379-382
• /
• 2017

Flow characteristics of dual bell nozzle with pintle were investigated. Thrust and thrust coefficient were compared with the pintle-bell nozzle of the same condition, and difference according to the pintle stroke was investigated. At stroke 0 mm, the thrust of the dual bell nozzle was about 13.18% higher than the bell nozzle, and when the pintle was backward, it was similar to the bell nozzle. The change in expansion ratio with stroke was considered to be more advantageous for a dual bell nozzle that performs altitude compensation through separation and transition.

• Journal of the Korean Professional Engineers Association
• /
• v.37 no.2
• /
• pp.47-53
• /
• 2004

Space-based radio-positioning and time transfer system, Provide accurate position, velocity, and time(PVT) information \longleftarrowunlimited number of suitably equipped ground, sea, air and space users, by the U.S Department of Defense(DoD), Comprises major system segments\longrightarrowSpace, Control and User

• Proceedings of the KSRS Conference
• /
• 2000.04a
• /
• pp.96-101
• /
• 2000

SAR(Synthetic Aperture Radar) interferometry 기술은 co-registration, 정밀궤도 계산, phase unwrapping, 지형보정과 같은 기술로 구성되어있다. 구속화된 위상값을 절대 위상값으로 변환하는 과정인 phase unwrapping 기술은 정밀지형고도를 얻는데 있어서 핵심기술이다. 본 연구에서는 JERS-1 SAR 영상으로부터 interferogram을 구하고, 이로부터 추출된 위상정보를 이용하여 branch cut(Goldstein et. al, 1988), minimum discontinuity(Flynn, 1997) 그리고 minimum $L^p$-norm(Ghiglia and Romero, 1996)방법 적용결과에 대한 비교 분석을 실시하였다. Goldstein 알고리즘은 수행속동가 매우 빠르지만 residue를 연결한 branch cut에 의해 분활된 영역 내에서, 서로 다른 적분 경로로 인해 위상이 단절되었다. 영상내의 모든 화소에서 절대 위상을 구한 minimum discontinuity와 minimum $L^p$-norm 알고리즘 수행 결과는 상관관계가 0.995로 매우 유사하였는데, 가중된 불연속선의 합을 최소화하는 minimum discontinuity 알고리즘이 minimum $L^p$-norm에 비해 영상 일부 지역에서 발생하는 위상 오차를 전파시키지 않는다는 장점이 있다. Minimum $L^p$-norm 방법은 다른 두 방법과 달리 위상정보 내에 많은 잡음이 있더라도 적절한 해를 구할 수 있다는 장점이 있다. 각 방법은 대상 자료의 특성에 따라 효율성이 있으나 Flynn의 알고리즘이 지역적 특성과 무관하게 가장 효과적임을 알 수 있었다.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.5
• /
• pp.469-479
• /
• 2014

N-RTK(Network based RTK) methods are able to improve the accuracy of GNSS positioning results through modelling of the distance-dependent error sources(i.e. primarily the ionospheric and tropospheric delays and orbit errors). In this study, the comparison of the TTFF(Time-To-Fix-First ambiguity), accuracy and discrepancies in horizontal/vertical components of N-RTK methods(VRS and FKP) with the static GNSS at 20 Unified Control Stations covering Incheon metropolitan city area during solar storms(Solar cycle 24 period) were performed. The results showed that the best method, compared with the statics GNSS survey, is the VRS, followed by the FKP, but vertical components of both VRS and FKP were approximately two times bigger than horizontal components. The reason for this is considered as the ionospheric scintillation because of irregularities in electron density, and the tropospheric scintillation because of fluctuations on the refractive index take the place. When the TTFF at each station for each technique used, VRS gave shorter initialization time than FKP. The possible reasons for this result might be the inherent differences in principles, errors in characteristics of different correction networks, interpolating errors of FKP parameters according to the non-linear variation of the dispersive and non-dispersive errors at rover when considering both domestic mobile communication infra and the standardized high-compact data format for N-RTK. Also, those test results revealed degradation of positing accuracy, long initialization time, and sudden re-initialization, but more failures to resolve ambiguity during space weather events caused by Sunspot activity and solar flares.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.4 no.2
• /
• pp.95-102
• /
• 2002

Spatial interpolation has become a common procedure in converting temperature forecasts and observations at irregular points for use in regional scale ecosystem modeling and the model based decision support systems for resource management. Neglection of terrain effects in most spatial interpolations for short term temperatures may cause erroneous results in mountainous regions, where the observation network hardly covers full features of the complicated terrain. A spatial interpolation model for daytime hourly temperature was formulated based on error analysis of unsampled site with respect to the site topography. The model has a solar irradiance correction scheme in addition to the common backbone of the lapse rate - corrected inverse distance weighting. The solar irradiance scheme calculates the direct, diffuse and reflected components of shortwave radiation over any surfaces based on the sun-slope geometry and compares the sum with that over a reference surface. The deviation from the reference radiation is used to calculate the temperature correction term by an empirical conversion formula between the solar energy and the air temperature on any sloped surfaces at an hourly time scale, which can be prepared seasonally for each land cover type. When this model was applied to a 14 km by 22 km mountainous region at a 10 m horizontal resolution, the estimated hourly temperature surfaces showed a better agreement with the observed distribution than those by a conventional method.

• Korean Journal of Remote Sensing
• /
• v.32 no.2
• /
• pp.171-183
• /
• 2016

Land Surface Temperature (LST) retrieved from Landsat 8 measured from 2013 to 2014 and it is corrected by surface temperature observed from ground. LST maps are retrieved from Landsat 8 calculate using the linear regression function between raw Landsat 8 LST and ground surface temperature. Seasonal and annual LST maps developed an average LST from season to annual, respectively. While the higher LSTs distribute on the industrial and commercial area in urban, lower LSTs locate in surrounding rural, sea, river and high altitude mountain area over Seoul and surrounding area. In order to correct the LST, linear regression function calculate between Landsat 8 LST and ground surface temperature observed 3 Korea Meteorological Administration (KMA) synoptic stations (Seoul(ID: 108), Incheon(ID: 112) and Suwon(ID: 119)) on the Seoul and surrounding area. The slopes of regression function are 0.78 with all data and 0.88 with clear sky except 5 cloudy pixel data. And the original Landsat 8 LST have a correlation coefficient with 0.88 and Root Mean Square Error (RMSE) with $5.33^{\circ}C$. After LST correction, the LST have correlation coefficient with 0.98 and RMSE with $2.34^{\circ}C$ and the slope of regression equation improve the 0.95. Seasonal and annual LST maps represent from urban to rural area and from commercial to industrial region clearly. As a result, the Landsat 8 LST is more similar to the real state when corrected by surface temperature observed ground.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.24 no.3
• /
• pp.155-163
• /
• 2022

The optimization of long-range ensemble climate prediction for rice phenology model with advanced bias correction method is conducted. The daily long-range forecast(6-month) of mean/ minimum/maximum temperature and observation of January to October during 1991-2021 is collected for rice phenology prediction. In this study, the concept of "buffer period" is newly introduced to reduce the problem after bias correction by quantile mapping with constructing the transfer function by month, which evokes the discontinuity at the borders of each month. The four experiments with different lengths of buffer periods(5, 10, 15, 20 days) are implemented, and the best combinations of buffer periods are selected per month and variable. As a result, it is found that root mean square error(RMSE) of temperatures decreases in the range of 4.51 to 15.37%. Furthermore, this improvement of climatic variables quality is linked to the performance of the rice phenology model, thereby reducing RMSE in every rice phenology step at more than 75~100% of Automated Synoptic Observing System stations. Our results indicate the possibility and added values of interdisciplinary study between atmospheric and agriculture sciences.

• The Journal of the Korea Contents Association
• /
• v.21 no.11
• /
• pp.203-212
• /
• 2021

The high-tech industry, a highly knowledge-intensive industry based on advanced technologies such as electronics, new materials, and IT, is developing rapidly centering on the semiconductor, display, and battery fields. The market size of this industry is continuously increasing, and various challenges are coming forward due to various factors such as changes in the market, changes in demand, and the requirements of the clients. Many strategies are being implemented to advance the start-up time of factories, such as fast-track construction and basic line construction. Therefore, construction of high-tech factory is required to respond to various types of construction plans and early decision making, and an accurate and reliable method of calculating construction costs is needed. In this study the existing construction type was classified into the overall line configuration considering the total production of the factory, and a basic line configuration for quick production start-up. The correction ratio/value for each detailed construction required to calculate the construction cost of the basic line configuration type was derived. Finally, reliability and accuracy were verified by applying the correction ratio suggested in this study to a new high-tech factory construction project.