• Journal of the Korean Electrochemical Society
• /
• v.19 no.1
• /
• pp.14-20
• /
• 2016

Vanadium redox flow battery (VRFB) is an energy conversion device in which charging and discharging are alternatively carried out by oxidation and reduction reactions of vanadium ions with different oxidation states. VRFB consists of electrolyte, electrode, ion-exchange membrane, etc. The role of ion-exchange membranes in VRFB separates anolyte and catholyte and provides a high conductivity to hydrogen ions. Recently much attention has been devoted to develop ideal ion-exchange membranes for VRFB. A number of developed ion-exchange membranes should be evaluated to find out ideal ion-exchange membranes for VRFB. Long-term durability test is a crucial characterization of ion-exchange membranes for commercialization, but is very time-consuming. In this study, the life time prediction protocol of ion-exchange membranes in VRFB cell tests was developed through short-term single cell performance evaluation (real total operation time, 87.5 hrs) at three different current densities. We confirmed a decrease in test time up to 96.2% of real durability tests (expected total operation time, 2,296 hrs) and 5~6% of relative error discrepancy between the predicted and the real life time in a unit cell.

• The Korean Journal of Mycology
• /
• v.9 no.1
• /
• pp.39-43
• /
• 1981

The enzymatic properties of pectin esterase from Aspergillus sp. were studied. The optimum conditions for the enzyme reaction were pH 4.2 and temperature of $45^{\circ}C$. The crude enzyme was very stable at pH range of $2.2{\sim}4.6$, but about 20 percent of activity was lost at the range of pH $5.4{\sim}8.0$. The crude enzyme was very stable at $50^{\circ}C$ for one hour, however almost 100 percent of enzyme activity was lost at $70^{\circ}C$ for 30 minutes. The pectin esterase activity of crude enzyme was greatly inhibited by addition of sodium chloride at lower pH range. That is, the inhibition rates of enzyme activity at pH 3.0 and 4.0 were 47% and 28% in concentration of 1M sodium chloride, respectively. The enzyme activity was not affected by sodium chloride at pH 7.0 at different concentration of sodium chloride. Although the enzyme activity was not affected by addition of sucrose, it was slightly inhibited at higher concentration of sucrose.

• Journal of Korea Foundry Society
• /
• v.41 no.3
• /
• pp.252-259
• /
• 2021

The magnesium is one of the important alloying elements in the conventional aluminum alloys. The addition of magnesium to aluminum is well known to increase the mechanical strength of the aluminum without the trade-off of the decreased elongation. However, the content of magnesium in aluminum alloys has been limited to be lower than about 5wt.% because of the high oxidation tendency of magnesium element during the manufacturing processes such as casting, hot-forming and post heat-treatments, which can deteriorate the quality and properties of the final products. In this study, new 'ECO-Almag6~9' (containing 6~9wt%Mg) alloys were investigated to be made of the ECO-Mg master alloy, which has been invented to reduce the oxidation tendency of itself. It was successfully demonstrated that ECO-Almag6~9 alloys can be fabricated through the mass-production facilities of DC casting and extrusion routes without the problems of magnesium oxidation. In addition, it was confirmed that the strength and ductility were simultaneously improved due to the addition of high magnesium contents.

• Korean Journal of Microbiology
• /
• v.28 no.2
• /
• pp.151-157
• /
• 1990

The maximum nitrogen fixation activity of the associative, microaerobic and acid tolerant bacteria, Azospirillum amazonense Kp1 was obtained with 0.2Kpa of $O_{2}$ and showed a reversible inhibition by the higher concentrations. Ammonium treatment caused a gradual inhibition of the activity up to 350mM. The nitrogenase systems were purified by gradient chromatography on DEAE-52 cellulose, heat treatment and preparative PAGE. The MoFe protein showed molecular weight of 210,000 including two nonidentical subunits with apparent molecular weights of 55,000 and 50,000 and an isoelectricpoint of 5.2 and contained 2, 24 and 28 atoms of Mo, Fe and acid labile S per molecule. The Fe protein revealed molecular weight of 66,000 including two types of subunits with molecular weights of 35,000 and 31,000 and an isoelectric point of 4.6, and contained 4 atoms of Fe and 6 atoms of S per molecule. The maximum specific nitrogenase activity attained 2,200 and 1,700nM $C_2H_4mg^{-1} min^{-1}$, respectively for MoFe and Fe proteins at pH7 and $35^{\circ}C$. The activity was lost after 10 and 30 days under the cold room ($4^{\circ}C$) condition for Fe and MoFe proteins, respectively.

• Proceedings of the KWS Conference
• /
• 2009.11a
• /
• pp.62-62
• /
• 2009

석탄화력발전소의 CO2배출량 감소와 고효율, 대용량화로 인해 초초임계압(USC:Ultra Super Critical) 화력발전소의 건설이 증가하고 있다. USC 발전소는 효율향상을 위한 증기온도와 압력의 상승 때문에 보일러 고온고압부에 기존의 소재에 비해 고온강도와 내산화성의 재료물성이 향상된 신소재 적용이 불가피하다. 특히 사용된 신소재 중에서 보일러 본체를 구성하는 수냉벽관(Water wall), 과열기와, 재열기용 튜브 및 후육부인 헤더와 배관재로 기존의 2.25Cr-1Mo강을 개량한 2.25Cr-1.6W계 내열강이 적용되고 있다. 2.25Cr-1.6W강은 SMI와 MHI가 공동개발한 소재로 1995년 튜브제품이, 1999년에 단조, 파이프재, 플레이트제품이 ASME code case로 등재되었고, 2009년 ASME code case 2199-4로 개정되어 사용 중이다. 이 소재는 2.25Cr-1Mo강에 고온강도 개선을 위해 석출강화효과가 있는 V과 Nb을 첨가하였고, 탄화물의 열적안정성과 고용강화효과 증대를 위해 W을 첨가하였다. 그리고 제작성과 용접성 및 재료의 인성 향상을 위해 B첨가와 C함량을 낮추었다. 합금성분의 첨가와 조정에 의해 고온강도는 개선되었지만, 보일러 설치 및 보수를 위한 용접과정에서 용접금속과 CGHAZ(Coarse Grain HAZ)에서 용접균열이 발생하였다. 대부분의 용접균열은 용접결함이나 고온 혹은 저온균열이 아닌 2.25Cr-1.6W계강의 강도 개선을 위해 첨가한 V과 Nb이 용접후열처리 도중 입내에 MX형태의 미세석출로 입내를 강화시킴으로서 발생한 재열균열 민감성 증대에 기인된 것으로 판단된다. 이에 본 연구에서 용접 및 후열처리 과정에서 용접금속과 HAZ에서 발생하는 용접금속의 응력분포를 전산해석을 통해 확인하고 실제 후육파이프 용접부에서 잔류응력을 측정해 비교하였다. 용접부 응력분포는 SYSWELD 프로그램을 사용해 해석을 수행하였고, 발전소 실배관재의 용접부 응력측정은 수평부 측정이 용이하도록 지그를 부착한 Potable 잔류응력측정기를 사용해 Hole Drilling Method(HDM)를 적용하여 잔류응력을 측정하였다. 해석 결과 CGHAZ부위의 잔류응력이 용접금속과 기타 부위에 비해 높은 응력분포를 나타냈으며, 이는 CGHAZ와 용접용융선 부근에서 균열이 발생하는 실제값과 일치하는 결과를 보였다. 실제 배관재 용접부에서 측정한 잔류응력값은 항복응력의 약 50% 이하 응력값을 나타냈다. 배관 구조에 기인한 시스템응력의 영향을 제거하기 위해 배관재 용접부를 중심으로 양끝단을 절단 후 용접부에서 측정한 응력은 항복응력 대비 25%수준의 낮은값을 보였다. 그러나 배관재가 장기간 고온환경에 노출되었고 용접금속 내부의 균열이 발생한 상태에서 측정하였기 때문에 용접잔류응력은 상당부분 해소되어 상대적으로 낮은 응력값이 얻어진 것으로 판단된다.

• Korean Journal of Food Science and Technology
• /
• v.36 no.5
• /
• pp.837-841
• /
• 2004

Changes in total aerobic bacteria (TAB), lactic acid bacteria (LAB), rod- and coccal-shaped lactic acid bacteria (R- and C-LAB), pH, and total acidity were investigated during fermentation of radish with new fermentation base at $20^{\circ}C$ for up to 16 days. New fermentation base was prepared by pre-fermenting a mixture of rice bran and rice water (1 : 0.1, w/v) at $20^{\circ}C$ for 7 days. Initially, radish showed 5.41, 4.23, 4.57, and 3.1 log CFU/g, and base showed 6.68, 6.60, 5.95, and 5.6 log CFU/mL for TAB, LAB, R-LAB, and C-LAB, respectively. Initial pH and total acidity of radish were $6.6^{\circ}C$ and 0.09%, and those of base were 5.76 and 0.36%, respectively, Counts of LAB (4.23 to 8.33 Bog Cpu/g, 6.6 to 9.7 log CFU/mL), R-LAB (4.57 to 7.15 log CFU/g, 5.95 to 8.5 log CFU/mL), and C-LAB (3.1 to 7.5 log CFU/g, 5.6 to 8.6 log CFU/mL) of radish and base respectively increased during initial fermentation period, then remained constant during late fermentation period, and far 4 days after fermentation, pH values (6.6 to 4.19, 5.76 to 4.57) drastically decreased and thereafter slowly decreased. Total acidities of radish and base (0.09 to 0.63%, 0.36 to 0.63%, respectively) drastically increased far 7 days after fermentation and increased slightly thereafter.

• The Journal of Engineering Geology
• /
• v.28 no.1
• /
• pp.69-79
• /
• 2018

The Korean government attempts to reduce $CO_2$ emissions by 37% to 314.7 Mt $CO_2$, down from the estimated 850.6 Mt $CO_2$ until 2030 in order to confront green house effect. In this context, in 2014, Korean government launched $CO_2$ Storage Environmental Management Research (K-COSEM) Center for carrying out pilot-scale research on $CO_2$ leakage from underground $CO_2$ storage facilities. For the detection of $CO_2$ leakage, it is necessary to identify hydrologeological and geophysical characteristics of the subject area. In the study site of Naesan-ri, Daeso-myeon, Eumseong-gun, Chungbuk Province, two times injection tests (June 28-July 24, 2017 and August 07-September 11, 2017) of $CO_2$ and $SF_6$ dissolved waters, respectively, was conducted to understand the leakage behavior of $CO_2$ from underground. The injection well was drilled to a depth of 24 m with a 21-m casing and screen interval of 21~24 m depth. Two times resistivity surveys on August 18, 2017 and September 1, 2017, were conducted for revealing the flow of the injected water as well as the electrical properties of the study site. The study results have shown that the high-resistivity zone and the low-resistivity zone are clearly contrasted with each other and the flow direction of the injected water is similar to natural groundwater flow. Besides, the low resistivity zone is widely formed from the depth of injection to the shallow topsoil, indicating that the weathered zone of high permeability has high $CO_2$ leakage potential.