• Journal of the Korean Recycled Construction Resources Institute
• /
• v.1 no.1
• /
• pp.89-97
• /
• 2005

Recently, for the problem solution of demand and supply imbalance of fine aggregate due to the shortage of natural fine aggregate resource and the environment regulation on sea sand extraction in the construction field, the studies for the application of recycled fine aggregate using waste concrete are being progressed versatilely. On the other hand, the treatment of fly-ashes that of industrial by-product originated in the steam power plant is discussed by the continuous increasing of origination quantities. In the ease of using fly-ash, advantages are the improvement of workability, viscosity and long-time strength, and the reduction of hydration heat under the early ages, as the admixtures for concrete, but the studies for the application of fly-ash as recycled concrete admixtures are inadequacy. There fore, in this study, through investigating the properties of fresh, hardened and durability according to the replacement of recycled fine aggregate and fly-ash, it is intended to propose the fundamental data for structural application of recycled concrete using recycled fine aggregate and fly-ash. As the result of this study, they arc shown that the engineering properties and durability, in the case of replacement ratio 100% of recycled fine aggregate, arc similar to those of concrete using natural fine aggregate, so it is considered that recycled fine aggregate could be used as the fine aggregate for concrete. Also, the performances of recycled concrete are improved by replacing fly-ash.

• Textile Coloration and Finishing
• /
• v.9 no.1
• /
• pp.44-49
• /
• 1997

Recent investigation and developments of A. Iqbal on diketo-pyrrolo-pyrrole (DPP) pigments has prompted us to synthesize and close observation of a few properties of these molecules. Described are synthesis, via 1-phenyl-2-ethoxycarbonyl-5-pyrrolinone intermediate, of asymmetric derivatives such as 1,4-Diketo-3-(4-chlorophenyl)-6-phenyl-pyrrolo-(3,4c)-pyrrole (4), 1,4-Diketo-3-(4-bromophenyl)-6-phenybpyrrolo-(3,4c)-pyrrole (5), 1,4-Diketo-3-(3-cyanophenyl)-6-phenyl-pyrrolo-(3,4c)-pyrrole (6), 1,4-Diketo-3-(4-cyanophenyl)-6-phenyl-pyrrolo-(3,4c)-pyrrole (7), 1,4-Diketo-3-(4-pyridyl)-6-phenyt-pyrrolo-(3,4c)-pyrrole (8), 1,4-Diketo-3-(3-pyridyl)-6-phenyl-pyrrolo-(3,4c)-pyrrole (9), 1,4-Diketo-3-(2-pyridyl)-6-phenyl-pyrrolo-(3,4c)-pyrrole (10), 1,4-Diketo-3-($\beta$-naphthyl)-6-phenyl-pyrrolo-(3,4c)-pyrrole (11), and UV-Vis absorption spectrum of the above compounds. Results from calculation of their absorption maxima using PISYSTEM are also described.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2005.11a
• /
• pp.29-32
• /
• 2005

Recently, for the problem solution of demand and supply imbalance of fine aggregate due to the shortage of natural fine aggregate and the environment regulation on sea sand extraction in the construction field, the studies for the application of recycled fine aggregate using waste concrete are being progressed versatilely. The purpose of this study is to investigate quality of recycled fine aggregate manufactured by drying manufacturing system which is the manufacture method of high duality recycled fine aggregate, and to analyze on thehardened and durability properties of recycled concrete using it. Therefore it is to present the fundamental data for application and utilization of recycled concrete. The results of this study are as follows; Quality of recycled fine aggregate by drying manufacturing system is improved, and compressive strength, carbonation depth and chloride ion penetration depth of recycled concrete using high quality recycled fine aggregate are similar to those of normal concrete using natural and crashed sand. But, resistance to $H_{2}SO_{4}$ show decreased somewhat.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.72-79
• /
• 2007

This study investigates the engineering properties of concrete incorporating lime stone crushed fine aggregate(Ls), which has been abandoned about 20% of total production due to the low purity. Test results showed that increase of Ls had favorable fluidity and slightly decreased air content. Bleeding capacity of all specimens was not appeared as those were high strength mixture proportion, but the specimens using more Ls accelerated initial and final setting. For the mechanical properties, specimens incorporating higher ratio of Ls, overall, resulted in increase of compressive strength, and exhibited very small inclined tendency in a dynamic elasticity modulus test In addition, for the durability properties, specimens incorporating higher Ls dramatically decreased a drying shrinkage and showed similar tendency in a frost & thaw test, as well as showing no more change in an accelerated neutralization test from the beginning. In conclusion, as it was confirmed in the experimental test, the high strength concrete applying Ls did not showed any problems in the aspects of engineering properties and mostly exhibited even more excellent quality than the specimens using natural fine aggregate.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.32 no.4
• /
• pp.327-332
• /
• 2019

Recently, inverter control systems have attracted immense attention to increase the energy efficiency. However, such systems use repeated on/off high currents for linear operation control, instead of the prevalent step variable current control method. Hence, there arise concerns of personal and property damage, especially due to the durability, explosive characteristics, and operating speed of the fuse, which is responsible for safety and is one of the internal components using current control. Therefore, in this paper, we propose an IEC60127-4 SMD sub-miniature fuse, consisting of Ag-Cu alloys and ceramic powder for arc soothing. The IEC60127-4 SMD sub-miniature fuse has high durability and cut-off capacity, and operates safely in dangerous circumstances caused by the inverter control system.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2022.11a
• /
• pp.109-110
• /
• 2022

Currently, interest in the quality of concrete is increasing. Among the important factors for evaluating the quality of concrete, interest in unit-water content is also increasing. Currently, the air-meter method, the microwave oven drying method, the capacitance method, and the microwave penetration method are used to measure the unit-water content of concrete.. Among the above methods, except for the microwave method, the measurement method is complicated, portability is reduced, and economic efficiency is reduced. This research aims to measure a unit-water content by using a Frequency Domain Reflectometry(FDR) sensor that is economical, simple to measure, and portable among microwave methods. In addition, it is an experimental study to determine the accuracy of unit-water content using a single input residual model during deep learning to solve the limitations of the FDR sensor.

• Textile Coloration and Finishing
• /
• v.35 no.2
• /
• pp.98-106
• /
• 2023

The recent surge in night walkers and pedestrian traffic accidents has led to an increased interest in retro-reflection-based products, leading to several studies on retro-reflection. Nonetheless, achieving high durability and dispersibility of retro-reflective glass beads in viscous polyurethane coating resin remains challenging. To address this issue, this study conduct to functionalize the surface of glass beads for covalent conjugation to coating resin to enhance their dispersibility and durability in the coating resin. The study evaluated the dispersibility, chemical composition, and retro-reflection properties of the functionalized glass beads and coating resin. The results showed that the functionalized glass beads conjugated to the polyurethane coating resin and exhibited excellent dispersibility, high durability, and maintained retro-reflection efficiency.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.201-202
• /
• 2023

Recently, interest in concrete quality has been increasing. It is important to manage these factors due to unit-water content and aggregate quality that affect concrete quality. In this study, the unit-water content of concrete was measured through an economical, easy-to-measure, and portable Frequency Domain Reflecmetry sensor among micro-methods that compensated for the shortcomings of existing concrete unit-water content measurement methods. As a result of predicting the unit-water content, the accuracy within the ± 10 kg/m³ error range was confirmed to be more than 72% of all factors. In order to ensure high accuracy, it is considered necessary to conduct an experiment to evaluate the unit-water content by conducting additional experiments according to other variables and factors.

• Journal of the korean Society of Automotive Engineers
• /
• v.7 no.1
• /
• pp.18-23
• /
• 1985

내연기관은 자동차용 기관에 의하여 일반대중과 접촉하게 되었으며, 특히 20세기 중반에 이르러 자동차라는 기계가 일반가정에서 사용되는 가구로 탈피하는 과정에서 그 중요장치의 하나인 자동차용 기관도 전문가가 취급하는 기계로부터 일반인이 취급하는 가구로의 탈피를 요구함에 따라 크게 발전해 온 것이 사실이다. 종래, 내연기관의 설계에 있어서 그 출력과 연료소비를 가장 중요한 성능평가의 요소로 삼아왔지만, 가구로서의 자동차의 최적화를 위해서는 더욱 중요한 많은 성능평가의 요소가 있다는 것을 인식할 필요가 있다고 생각한다. 실은 최적화에 필요한 많은 요소의 균형을 어떻게 할 것인가 하는 것이 자동차용 기관의 설계에 있어서 가장 중요한 일이라 생각되며, 자동차용 기관을 계획할 때의 목표는 다음과 같은 3가지로 생각된다. (1) 고성능일 것 (2) 우수한 기능을 가질 것 (3) 공해가 없을 것 (1)의 고성능을 추구하는데 있어서는 비출력, 연료소비율 및 양호한 응답성이 중요한 요소로 된다. 이중 응답성의 문제는 연료공급기구나 조속기 등의 기능적인 요소와 깊은 관련이 있다. 그리고 내구성, 신뢰성, 정비점검의 무용성이라는 것이 (2)의 우수한 기능을 보장하기 위한 가장 중요한 배경으로 된다. 또한 진동이나 소음이 없고 정숙할 것이 (3)의 무공해성의 목표와도 관 련되는 중요한 요소이다. 배출가스의 무공해화가 자동차에 의한 공해방지의 입장으로부터 중요한 요소가 되는 것은 주지의 사실이다. 그리고 이 배출가스의 청정화의 문제는 성능향상을 위한 비출력증대의 방향에 대한 방해가 되는 문제이다. 이상 기술한 바와 같은 설계단계에 있어서의 계획목표를 3가지로 설정하고, 이 3가지 목표에 관련되는 요소의 균형을 어떻게 위해야 할 것인가 하는 점에 초점을 맞추어 되도록 쉽게 기술하고자 하였으나, 미비한 점이 많았을 것으로 생각하여, 다만 이 분야에 종사하는 기술자 여러분에게 약간의 도움이라도 되었으면 하는 것이 소망이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2016.02a
• /
• pp.166.2-166.2
• /
• 2016

최근 생산 장비의 발달로 인해 절삭공구, 전기전자 부품, 항공 및 자동차 부품 생산에 필요한 생산 장비의 수명연장, 고속 절단 및 고성능화가 중요시 되면서 우수한 내구성, 내마모성 및 고온 안정성을 갖는 기계부품 및 공구를 요구하게 되었다. 내마모성을 가지는 표면을 얻기 위해서는 TiN, TiC, AlN, Al2O3, CrN, ZrO2와 같은 경도 높은 물질을 증착하여 특성을 개선시키는 방법이 있다. 특히 AlN은 비교적 우수한 경도와 고온 안정성을 가지고 있어, 생산 장비의 고속 절단 및 반복되는 정밀 작업으로 인한 열충격과 마모를 완화시키는 역할을 하는 코팅재로 사용하기 적합하다. 본 실험에서는 RF-magnetron sputtering 방법을 이용하여 AlN 박막을 파워 150W, 질소가스 분압비에 따라 25%, 50%, 75%, 100%의 조건으로 금속기판 위에 증착하였다. 금속 기판 위에 제작된 AlN막은 XRD (X-ray Diffraction)을 사용하여 배향성을 확인하였고, HM-220 (Micro-vickers hardness tester)을 사용하여 AlN박막의 경도를 측정하였으며, SEM (Scanning Electron Microscope), AFM (Atomic Force Microscope)을 이용하여 표면의 구조와 거칠기를 측정하였다. 이 실험을 통하여 우수한 물성과, 치밀한 조직의 AlN박막이 고속 절삭 공구, 유공압 실린더, 베어링과 같은 금속부품의 코팅소재로 적용가능 할 것으로 기대된다.