• The korean journal of orthodontics
• /
• v.30 no.3 s.80
• /
• pp.343-355
• /
• 2000

The purpose of this study was to evaluate the amount and interrelationship of hard and soft tissue changes after mandibular setback osteotomy and reduction genioplasty in mandibular prognathism with long anterior facial height. The control group (Group A) consisted of 20 patients who had severe horizontal discrepancy. They experienced Presurgical orthodontic treatment and orthognathic surgery via mandibular setback. The experimental group (Group B) consisted of 20 patients who had severe horizontal and vertical discrepancy. They experienced presurgical orthodontic treatment and orthognathic surgery via mandibular setback and reduction genioplasty. The presurgical and postsurgical lateral cephalograms were evaluated. The computerized statistical analysis was tarried on with EXCEL 97 program. The results were as follows : 1. The correlation of hard and soft tissue horizontal changes in lower 2/3 of lower anterior facial height were high for both groups. The correlation coefficients of hard tissue changes and Ls, Stm, Li changes in Group B were moderately higher than Group A. 2. The correlation of hard and soft tissue vortical changes in Group B were lower than Group A. (except for pointB-Ils, Me-Me') 3. The ratio for soft tissue to Pog in Group B was lower than Group A. The ratios of hard and soft tissue vertical changes were 32% at Ils, 54% at Pog', and 60% at Me'. 4. The ratio of lower anterior facial height to total anterior facial height was reduced for both groups. But ratio of upper 1/3 of lower anterior facial height to total anterior facial height did not changed significantly in Group B. 5. Reduction genioplasty combined with mandibular setback procedure showed no change in upper one third(Sn-Stm) and significant decrease(Stm-Me') in the lower two thirds of the soft-tissue anterior lower facial height

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.228-237
• /
• 2021

Physiologic tooth attrition is accepted as a natural change. But when pathologic changes, such as loss of occlusal vertical dimension, masticatory pain, loss of masticatory function, and loss of esthetics occur, restorative measures should be taken by dentist. A patient visited the clinic with the chief complaint of 'My lower teeth bite the palate and it hurts'. It was diagnosed as iatrogenic attrition of lower natural dentition caused by inappropriate upper restorations, resulting in traumatic overbite. Through model analysis and diagnostic wax up, increase in vertical dimension was decided. Upper and lower dentitions were restored with new prostheses. After restoration, satisfactory outcomes were achieved both in functional and esthetic aspects.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.306-313
• /
• 2016

Tooth wear is known as a normal physiological process which gradually progresses. It is reported that vertical dimension can be kept stable because amount of physiologically worn loss could be compensated by growth of alveolar bone and tooth eruption. However, excessive tooth wear as pathologic wear can cause pathologic pulp, disharmony with occlusal plane, functional disorders and esthetic problems so that full mouth rehabilitation could be needed in these cases. Recovery of function and esthetic improvement should be considered for alteration of the vertical dimension. Determination of the vertical dimension of occlusion is needed to be in harmony with the neuromuscular system. This clinical report describes 36 year-old female patient who had chief complaint of severely worn dentition and esthetic discomfort. An increase of 2.0 mm at maxillary incisal edge was done to restore vertical dimension. It was based on the degree of tooth wear and esthetics.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.2
• /
• pp.140-145
• /
• 2016

Excessive occlusal wear causes loss of tooth structure, occlusal plane disharmony, impaired function and esthetic problems. Although the decrease of occlusal vertical dimension may be compensated by the growth of alveolar bone and tooth eruption, minimal increase of occlusal vertical dimension may be required for esthetics and retention of prosthesis. In this case, a 44-year-old male patient visited Seoul National University Dental Hospital with chief complaint of severe tooth wear and shade disharmony. Based on assessment of diagnostic wax-up, 3 mm increase of occlusal vertical dimension was determined. Removable occlusal splint and interim prosthesis was used to ascertain patient's comfort and adaptation. After the adaptation period, definitive prosthesis fabricated with full-contour monolithic zirconia were delivered and the patient was recommended to wear a nightguard device for prosthesis protection. This report presents a case of full mouth rehabilitation with the elevation of patient's occlusal vertical height, resulting in satisfactory esthetics and functions.

• The Journal of Korean Academy of Prosthodontics
• /
• v.51 no.1
• /
• pp.39-46
• /
• 2013

The loss of posterior support may cause attrition of anterior teeth, and loss of occlusal vertical dimension (OVD). The collapse of the posterior support will eventually cause the pathologic change of the TMJ and masticatory muscles, unesthetic facial appearance and decreased masticatory function. Patients with destroyed dentition need extensive prosthetic treatments. Proper diagnosis and treatment planning are necessary for the stability of the neuromuscular system and the TMJ, and esthetic and functional definitive restorations. In this case, 63 year-old male presented with decreased masticatory force and esthetic problems due to pathologic destruction of teeth structure on entire dentition. Based on assessment of OVD including intraoral findings, radiographic examination and diagnostic cast, full-mouth rehabilitation with increase of OVD was planned using fixed partial denture and removable partial denture. Diagnostic wax-up was done after 4 mm increase of OVD determined by assessment of OVD. The OVD was maintained with the overlay type removable interim prostheses for 12 weeks to ascertain his comfort and adaptation to the new OVD. After the adaptation period, second interim prostheses with tooth preparation maintaining the established OVD was delivered. After 4 weeks, final prostheses were fabricated and delivered. After 7 month follow-up period, occlusal stability is maintained. Through this procedure, satisfactory outcomes were achieved both in functional and esthetic aspects.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.26 no.4
• /
• pp.477-482
• /
• 2010

In a case of multiple posterior teeth loss, antagonistic teeth extrude to the edentulous space and compensatory occlusion on the remained anterior teeth leads to occlusal trauma. Extrusion of antagonistic teeth breaks down occlusion plane and loss of posterior support bring about severe wear of remained teeth. In this situation, it is needed to restore remained teeth and edentulous space by increasing vertical dimension to obtain prosthodontic rehabilitation space and to correct occlusion plane. In this case report, the patient had a masticatory problem with loss of posterior teeth support and an esthetic problem of shortened anterior teeth. Before the tooth preparation for the prosthodontic restoration, the patient used removable device for 2 months to increase vertical dimension reversibly. After that, he got provisional fixed restoration with irreversible tooth reduction and used it for 3 months. It had spent 5 month to evaluate the adaptation state on final restoration with incresed vertical dimension. The increasing amount was 3 mm, which was relatively in less degree and masticatory system adapted to the increased vertical dimension without any pathologic changes. Final restoration was made to have equal-intensity contacts on all teeth in a verifiable centric relations and immediate disclusion of all posterior contacts the moment the mandible moves in any direction from centric relation. In addition, metal occlusion surface on posterior teeth was applied to prevent excessive muscle activation, occlusal trauma and the porcelain fracture.

• The korean journal of orthodontics
• /
• v.27 no.1
• /
• pp.119-127
• /
• 1997

The configuration of mandibular symphysis is likely to be dependent upon the genetic predeterminants and/or compensatory adjustments onto functional demands. The interrelation of morphological distinctives of symphysis in conjunction to the craniofacial skeleton had been scarcely anecdotal, therefore, the objective was to determine the correlation of morphological modifications between the mandibular symphysis and craniofacial complex. Lateral cephalometric headfilms of 212 subjects were employed for the conventional measurements. The proportion of chin height against chin depth length was referred as chin ratio, then, Low Symphysis (IS) and High Symphysis (HS) groups were turned out by means of the chin ratio. These samples yielded 35 in LS and 35 in HS groups. The data per capita were statistically analyzed and the following results were drawn ; 1. Overall characteristics of the craniofacial skeleton in HS group manifested hyperdivergence and LS group showed hypodivergence. 2. Gonial angle increased as chin ratio increased and was highly correlated to the chin ratio. 3. The chin ratio presented high correlation to the vertical face height, especially in terms of the chin height to anterior face height and the chin depth to posterior face height. 4. The morphological configuration of chin was hardly correlated with hyoid bone position.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.37 no.3
• /
• pp.157-170
• /
• 2021

Loss of posterior bite support might cause unstable occlusal relationship and when the mandible slides forward in the centric or habitual occlusion, excessive load is applied to the anterior region followed by causing the occlusal plane to collapse or leading to a decrease in occlusal vertical dimension. In addition, disorder of temporomandibular joint function may occur. The inter-dental arch discrepancy causes a mismatch in the vertical and horizontal overlap of the anterior and posterior regions. The deep bite in the anterior region and the scissor bite in the posterior region cause unstable occlusal contact and insufficient occlusal contact area. This report was to rehabilitate a patient with above-mentioned complex problems. Physiologic adaptation to increased vertical dimension and new occlusal plane were evaluated using provisional prostheses, and definitive prostheses was fabricated using cross-mounting technique. Stable occlusion, harmonious teeth overlap and adequate occlusal plane were established, so functionally and aesthetically satisfactory results are obtained.

• The Journal of Korean Academy of Prosthodontics
• /
• v.57 no.4
• /
• pp.495-505
• /
• 2019

This study reported the treatment of a patient with excessive worn dentition and limited maxillo-mandibular space for restoration, utilizing the computer-aided design and computer-aided manufacturing (CAD/CAM) technology. After the thorough examination of the patient's occlusal vertical dimension (OVD), full mouth rehabilitation was planned with increase of the OVD. The patient was satisfied with the provisional restorations establishing the increased OVD. The horizontal and vertical data of the patient's jaw relation that the provisional restorations contained were transferred to the definitive metal ceramic fixed prostheses by double scanning and three-dimensional printing. After the fixed restorations were cemented to the abutments, electronic surveying and three-dimensional printing were used to fabricate metal frameworks for the patient's removable partial dentures. The mandibular definitive removable prostheses were delivered to the patient's mouth and the full mouth rehabilitation procedures were completed. The digital technologies used for this case produced fixed and removable restorations satisfactory in masticatory, phonetic and aesthetic functions to both the patient and the dental clinician.

• The Journal of Korean Philosophical History
• /
• no.25
• /
• pp.333-354
• /
• 2009

Zhuangzi contends that one of the reasons to cause life difficulties is mistaking the truth of cosmos and the existence meaning of human. There is no difference of value between the existence of human and universal creatures. However, "human mind" can not being peaceful because of " ChengXin(成心)" causes the difference of right and wrong. Zhuangzi contends the ideal world is "ZhiDe zhi World(至德之世)" of unmoved mind. Because of the value of "RenYiDaoDe(仁義道德)" in politics, the status of ideal existence of human and creatures is destroyed, i.e., disturbing the status of peaceful mind. This is also a reason of life difficulties. Zhuangzi contends the reasonable relationship of human and creatures is to recognize creatures as creatures, and therefore, there is no difference of value between creatures. Additionally, one shall understand the concept of "universal creatures are the same(萬物?一)" is based on the fact of continuous change of universal creatures. The socalled concept of "universal creatures are the same(萬物?一)" in Zhuangzi's thought is based on three dimensions: one is the materials of forming universal creatures; one is the same meaning of "Hisn" between human and creatures, and universal creatures are continuously changing. Therefore, one shall get a clear understanding of the nature of things, and one may treat the universal creatures in the concept of "universal creatures are the same(萬物?一)".