• Journal of Korean Society of Environmental Engineers
• /
• v.33 no.4
• /
• pp.223-230
• /
• 2011

According to EMEP/EEA Emission Inventory Guidebook, the emissions produced by vehicle in cold start phase should be calculated differently compared to hot start phase. In this study, considering this driving cycle, more appropriate procedures for estimating Environmental Benefits was suggested. Using Tier 3 standard, all links within the impact area were included in estimating emissions. Traffic volume and travel distance were analyzed using EMME/3 software. For application of the procedures in this study, the case study was carried out with real transportation project. As a result, the Environment-Benefits increased by 30%. If the methodology suggested in this study is applied to feasibility study it will help to activate the investment of the environment-friendly modes like railway in the future.

• The Journal of Bigdata
• /
• v.2 no.2
• /
• pp.1-7
• /
• 2017

Intelligent transportation system (ITS) has been introduced to maximize the efficiency of operation and utilization of the urban traffic facilities and promote the safety and convenience of the users. With the expansion of ITS, various traffic big data such as road traffic situation, traffic volume, public transportation operation status, management situation, and public traffic use status have been increased exponentially. In this paper, we derive structural characteristics of urban traffic according to the vehicle flow by using big data network analysis. DSRC (Dedicated Short Range Communications) data is used to construct the traffic network. The results can help to understand the complex urban traffic characteristics more easily and provide basic research data for urban transportation plan such as road congestion resolution plan, road expansion plan, and bus line/interval plan in a city.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.38-48
• /
• 2017

Link attributes, such as speed, occupancy, and flow, are essential factors for transportation planning and operation. It is, therefore, one of the most important decision-making problems in intelligent transport system (ITS) to determine the optimal location of a sensor for collecting the information on link attributes. This paper aims to develop a model to determine the optimal location of a sensor to minimize the variability of traffic information on whole networks. To achieve this, a network sensor location model (NSLM) is developed to reflect discrete characteristics of data collection. The variability indices of traffic information are calculated based on the summation of diagonal elements of the variance-covariance matrix. To assess the applicability of the developed model, speed data collected from the dedicated short range communication (DSRC) systems were used in Daegu metropolitan area. The developed model in this study contributes to the enhancement of investment efficiency and the improvement of information accuracy in intelligent transport system (ITS).

• Journal of Environmental Policy
• /
• v.6 no.1
• /
• pp.111-132
• /
• 2007

The traffic noise of Busan, the second largest city in Korea, is polluting the area. Noise map is a map that shows data on an existing or predicted noise condition in terms of a noise indicator, breaches of a limit value, the number of dwellings exposed to certain values of a noise indicator in a certain area, or on cost-benefit ratios or other economic data on mitigation methods or scenarios with Geographic Information System. With noise map, the effect of traffic noise and the efficiency of city development plan are exactly estimated. So making systematic counteroffer is possible with it. This study is aimed to the construction of basis for noise map construction method for domestic use and the area focus is Busan.

• Journal of Korean Society of Transportation
• /
• v.27 no.1
• /
• pp.35-42
• /
• 2009

One of the problems we face up at the time of planning or improving a transportation transfer facility is which modes and how close we have to put together. The goal here is to keep the connecting transportation mode as close as possible to the prime transit mode, so people travel a minimum transfer path, a distance from one mode to another. Too much a physical separation between modes will limit, even with an intensive improvement of the component links, the level of service of a transfer path as a whole. This study defined a transfer path as the whole stretch of the distance from an arrival point of one mode to the departure point of the connecting mode. The transfer path was divided into three typical segments as side walk, stairways, and indoor corridors. Preference surveys were made for each of these segments, resulting in relative resistance. The sum of individual segments weighted with the relative resistance will make a transfer resistance of the path, which in turn constitutes a transfer utility function together with the overall satisfaction score obtained by the interview survey. The transfer utility function has been utilized to evaluate the transfer distance between modes.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.17 no.2
• /
• pp.143-148
• /
• 2011

Daesan Harbor is developing under the Industrial Complex or Petrochemistry Development Plan making the port the main hub-port in the West coast. Because of this development. the traffic volume is expected to increase to 9,1.95 incoming vessels by 2020, an increase of 167% compared to 2008 figure. This study thoroughly analyzes and evaluates a systematic and comprehensive use of the fairway in the Daesan Harbor. It establishes a future oriented and safe marine transportation environment upon appropriate examination of the total fairways and sailing assistance facilities.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.15 no.3
• /
• pp.143-148
• /
• 2015

In order to design and plan a city, the importance of collecting traffic information increases. However, current method to collecting traffic information by using sensors layed on the roads is not appropriate for exceptional cases such as national highway or newly planned city area, where sensors are already not layed. To scope the cases, the traffic information is estimated from traffic information of surroundings area. This paper develops portable traffic volume measuring equipment utilizing two or radar detector, so that more useful traffic information can be obtained in any environments. Furthermore, the system allows users to be able to instantly analyze gathered data on the site. The system has been tested in the field and proved the excellences theough the field test.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.2D
• /
• pp.209-215
• /
• 2011

Roundabout has circular traffic island in the intersection center and is kind of intersection where the automobile bypass circular traffic island. In Korea, the provisional Roundabouts Design Guidelines were published in 2004 by MLTM (Ministry of Land, Transport and Maritime Affairs). This guideline did not discussed domestic traffic circumstance. It just only introduced foreign instances and their guidelines. In addition, the recent National Competitiveness roundabouts as part of the green growth has been concentrated on the interest. In this paper, 90 degree of the 4-legged roundabout was compared with 72 degree, 45 degree, and 30 degree 5-legged roundabouts by micro simulation VISSIM. As a result of analysis, average travel time is decreased when the inscribed circle diameter become bigger the roundabout. 5-legged roundabout until 2,000 volume per hour evaluated to be similar effect at 90 degree of 4-legged roundabout.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.2
• /
• pp.135-148
• /
• 2013

Recently, road tunnels have become longer and the plans for long and deep road tunnel have been underway in urban areas. These long and deep tunnel excavations include NATM and TBM. Shield TBM is applied to around 80% of traffic tunnels in Europe, and approximately 30% of them in other developed countries. However, as much of equipment is imported from foreign countries at high prices and distribution rate of TBM tunnel is considerably low in Korea, NATM excavation method is commonly used. To increase TBM tunnel, it is necessary to do assure economic feasibility with the supply-demand of TBM equipment. For this, the selection of standardized TBM diameter is urgently needed. Therefore, the study aims to estimate the standardized optimum section properties of TBM by examining TBM excavation cross section utilization depending on the volume of traffic, the number of lane and its cross-section type(single or double deck), and ventilation system.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.570-576
• /
• 2017

Trucks take up more portions than cars on highways. Due to this, road use relatively diminish and it serves locally as a threatening factor to nearby drivers. Baggage car accident has distinct characteristics so that it needs the application of different analysis opposed to ordinary accidents. Accident prediction model, one of accident analyses, is used to predict the numbers of accident in certain parts, establish traffic plans as well as accident prevention methods, and diagnose the danger of roads. Thus, this study aims to apply the accident rate of baggage car on highways and calculate the correction factor to be put in the accident prediction models. Accident data based on highway was collected and traffic amounts and accident documents between 2014 and 2016 were utilized. The author developed an accident prediction model based on numbers of annual accidents and set mean annual and daily traffic amounts. This study intends to identify the practical accident prediction model on highway and present an appropriate solution by comparing the prediction model in accords with the accident rate between baggage cars.