• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.5 no.1 s.9
• /
• pp.1-12
• /
• 2006

In order to estimate a dynamic origin and destination demand between on and off-ramps in the freeways, a traffic flow theory can be used to calculate a link distribution proportion of traffics moving between them. We have developed a dynamic traffic estimation model based on the three-phase traffic theory (Kerner, 2004), which explains the complexity of traffic phenomena based on phase transitions among free-flow, synchronized flow and moving jam phases, and on their complex nonlinear spatiotemporal features. The developed model explains and estimates traffic congestion in terms of speed breakdown, phase transition and queue propagation. We have estimated the link, on and off-ramp volumes at every time interval by using traffic data collected from vehicle detection systems in Korea freeway sections. The analyzed results show that the developed model describes traffic flows adequately.

• Journal of the Korean Institute of Gas
• /
• v.19 no.3
• /
• pp.38-43
• /
• 2015

For buried gas pipelines, cathodic protection system shall be installed to protect against corrosion. The surveys of pipe-to-soil potentials for the gas pipelines should be carried out at the test box more than once a year. In urban, the test box is usually located on the driveway, therefore, it is difficult to measure the potentials. That is, traffic control is needed when carrying out the measurements of the potentials on daytime, or measurements of pipe-to-soil potentials at the test box located on the driveway have to be carried out in the late night when the traffic is light. We have developed remote potential monitoring system using the solid reference electrode and the wireless communication technology for the purpose of removing above problems. We have installed the developed solid reference electrodes at a site and monitored the potentials by wireless communication. Measured potential values were transferred to the server in office and analyzed. We have found the pipe-to-soil potentials transferred to the web server make no difference to the potentials measured directly on the site.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.6
• /
• pp.795-810
• /
• 2019

In this paper, The study was conducted on the method to roughly determine the area and length of the multi-utility tunnel before the planning and design phase of the multi-utility tunnel construction. For this purpose, four feasibility indexes were used: traffic density, population density, disaster prevention index (number of workers), and urbanization rate, which reflect the regional characteristics. The installation criteria were set in consideration of the average value and minimum value of the feasibility indexes for the tunnel type among areas that can be installed in the multi-utility tunnel of Seoul. The analysis area included 200 areas based on 14 zones. The results of the analysis based on the minimum value of feasibility indexes indicated that the tunnel type of multi-utility tunnel is suitable for 39 areas with high traffic volume and population. On the other hand, the 'gun' area, etc., has a wider population than the 'si' and 'gu', suggesting that it is not suitable to install multi-utility tunnel. In addition, it can be seen that the larger the index value centered on the minimum value of each index, the smaller the tunnel type of multi-utility tunnel installation area.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.131-137
• /
• 2004

Conventional traffic signal optimization models assume that green intervals for pedestrian crossings are given as exogenous inputs such as minimum green intervals for straight-ahead movements. As the result, in reality, the green intervals of traffic movements may not distribute adequately by the volume/saturation-flow of them. In this paper, we proposed signal optimization models formulated in BMILP to integrate pedestrian crossings into traffic movements under under-saturated traffic flow. The model simultaneously optimizes traffic and pedestrian movements to minimize weighted queues of primary queues during red interval and secondary queues during queue clearance time. A set of linear objective function and constraints set up to ensure the conditions with respect to pedestrian and traffic maneuvers. Numerical examples are given by pedestrian green intervals and the number of pedestrian crossings located at an arm. Optimization results illustrated that pedestrian green intervals using proposed models are greater than those using TRANSYT-7F, but opposite in the ratios of pedestrian green intervals to the cycle lengths. The simulation results show that proposed models are superior to TRANSYT-7F in reducing delay, where the longer the pedestrian green interval the greater the effect.

• Journal of Korean Society of Transportation
• /
• v.26 no.4
• /
• pp.63-76
• /
• 2008

The goals of this study are to develop travel time functions based on intersection delay and to analyze the applicability of the functions to traffic assignment models. The study begins with the premise that the existing assignment models can not effectively account for intersection delay time. In pursuing the goals, this study gives particular attention to dividing the link travel time into link moving time and stopped time at node, making the models based on such variables as the travel speed, volume, geometry, and signal data of signalized intersections in Cheongju, and analyzing the applicability of these models to traffic assignment. There are several major findings. First, the study presents the revised percentage of lanes (considering type of intersection) instead of g/C for calculating intersection delay, which is analyzed to be significant in the paired t-test. Second, the assigned results of applying these models to the Cheongju network in EMME/2 are compared with the data observed from a test car survey in Cheongju. The analyses show that the BPR models do not consider the intersection delay, but the modified uniform delay model and modified Webster model are comparatively well fitted to the observed data. Finally, the assigned results of applying these models are statistically compared with the test car survey data in assigned volume, travel time, and average speed. The results show that the estimates from the divided travel time model are better fitted to observed data than those from the BPR model.

• Journal of Navigation and Port Research
• /
• v.32 no.10
• /
• pp.743-750
• /
• 2008

Recently Bridges crossing waterway are constructed in navigable waterway, so marine accidents near bridges navigable waterway often occurred bemuse that has affect dangerous element for. This paper analysed the necessary environmental factors to navigate safely near bridges and how to set up the environmental factors. Marine accidents elements occurred near bridges relate to span of bridge, size of navigating ship, length of straight way and traffic volume except mistake of mariners. As results of marine accident parameter analysis, Span of bridge is necessary more than 300m at least based on marine accident's analysis, and in case of more than ship's Length 150m, span of bridge is necessary more than 500m, $3{\sim}4L$(L; Ship's Length). Length of straight way before bridge is necessary more than 8L to minimize the marine accident.

• Journal of Korean Society of Transportation
• /
• v.21 no.4
• /
• pp.133-144
• /
• 2003

The current procedure of estimating accident reduction benefit shows fixed accident rates for each level of roads without considering the various characteristics of roadway geometries, and traffics. In this study, in order to solve the problems mentioned in the above, models were developed considering the characteristics of roadway alignments and traffic characteristics. The developed models can be used to estimate the accident rates on new or improved roads, In this study, only urban highways were included as a beginning stage. First of all. factors influencing accident rates were selected. Those factors such as traffic volumes. number of signalized intersections, the number of connecting roads, number of pedestrian traffic signals, existence of median barrier, and the number of road lane are also selected based upon the obtainability at the planning stage of roads. The relationship between the selected factors and accident rates shows strong correlation statistically. In this study, roads were classified into 4 groups based on number of lanes, level of roads and the existence of median barriers. The regression analysis had been performed for each group with actual data associated with traffic, roads. and accidents. The developed regression models were verified with another data set. In this study, in order to develop the proposed models, only data on a limited area were used. In order to represent whole area of the country with the developed models. the models should be re-analyzed with vast data.

• Journal of Navigation and Port Research
• /
• v.31 no.3 s.119
• /
• pp.205-212
• /
• 2007

Due to the construction of Incheon Grand Bridge, there is driven a necessity for rearranging the function of Inner Port with the development of Outer South Port. In this paper, I'd like to simulate the port operation levels of Lock Gate in Inner Port with estimating the traffic volumes of 2011 and 2015, which will reveal the Demurrage Cost and the Accumulation Cost of Freight in Inner Port. Finally I will evaluate the economic movement effects of the container ship's calling from Inner port to South Port/Outer South Port from 2011 to 2015. The results are as followings ; (1) The average utilization of Lock Gates are reduced by $7\sim8$ percentage point. (2) The mean queueing value are saved by 25 percentage point. (3) The Demurrage Cost and the Accumulation Cost of Freight except Lock Gate charges and the Benefit of Routeing Reduction are saved about 800 million Won annually.

• Journal of Korean Society of Transportation
• /
• v.17 no.2
• /
• pp.115-126
• /
• 1999

Past nears many Studies have been described for present state and forecasted for the future phenomena in various areas. Many theories and methodologies in transportation have been developed and applied by researchers and planners. On the other hand, many theories and methodologies had disappeared caused by their critical limitations. One of this cause that was discovered of the Chaos in traffic flows. The occurrence of Chaos in traffic flows has affected to the traffic volume and decreased significancy of a simulation result of a specific traffic flow. According to this fact, long-term forecast of traffic flow is difficult, moreover a butterfly effect impedes development and establishment of transportation model. A methodology to solve Chaos character in traffic flow can be able to provide more effective transport planning. This study tackles to enhance and revise the existing theories for the traffic flow applying Chaos theory to estimating travel time.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.15 no.1
• /
• pp.63-73
• /
• 1997

The objective for the plan of informatization which the government earring out is the modernization of the in-formation service system to be diverse and speedy. With the increase in variety and volume of the available in-formation at the city now, it has become necessary to develop more efficient system of offering the various displays by using computer graphics and multimedia functions as well as storing and managing the information. The multimedia urban information system, which we developed, was designed to furnish various informations of the city to the citizens more efficiently by using Visual BASIC in the personal computer with inexpensive prior. The datas of text, voice, and dynamic images were integrated in this, system by multimedia tools. Also, the database was established to get the expert datas-traffic volume in peak hour, traffic accidents, and road information. as well as general urban informations.