• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.29-38
• /
• 2020

It is practically difficult to accurately measure the temperature and concentration of a large combustion systems at industrial sites in real time. Temperature measurement using thermocouple, which are mainly used, is a point-measuring method that is less accurate and less reliable to analyze the wide area range of inner combustion system, and has limitations to internal accessibility. In terms of concentration analysis, most measurement methods use sampling method, which are limited by the difficulty of real-time measurement. As a way to overcome these limitations, laser-based measurement methods have been developed continuously. Laser-based measurement are line-average measurement methods with high representation and precision, which are beneficial for the application of large combustion systems. In this study the temperature and concentration were measured in real time by water vapor and oxygen generated during combustion using Tunable Diode Laser Absorption Spectroscopy (TDLAS). The results showed that the average temperature inside the combustion system was 1330℃ and the mean oxygen concentration was 3.3 %, which showed similar tendency with plant monitoring data.

• Proceedings of the Korean Society of Postharvest Science and Technology of Agricultural Products Conference
• /
• 2003.04a
• /
• pp.135-136
• /
• 2003

알코올 분무, 셀로판지 부착 등의 표면처리가 포장김치의 표면갈변과, pH, 산도, 균수 및 관능적 품질에 미치는 영향을 조사하였다. 실험에 사용된 포장김치는 200 g 들이 플라스틱 용기에 김치를 담은 후 무처리, 70% 알코올로 표면을 1회 분무한 것, 김치표면에 폴리에틸렌필름(두께 0.04 mm)을 부착하여 저장실 (10$\pm$1$^{\circ}C$)에서 21일간 저장하면서 3일 간격으로 조사하였다. 그 결과, 무처리와 알코올을 분무한 경우는 저장 15일째에 pH가 4.0수준에 도달하였으나 김치표면에 polyethylene film을 부착한 경우는 21일째까지도 pH가 4.0 이상을 유지하였다. 산도의 경우도 pH와 동일한 경향을 나타내어 polyethylene film으로 표면처리함으로서 김치의 숙성이 지연되었다. 무처리와 알코올을 처리한 것은 12일째부터 김치표면이 갈변하기 시작하였으며 18일째는 그 갈변정도가 심하였다. 그러나 polyethylene film을 표면에 부착한 경우는 저장 21일째까지도 갈변정토가 미약하였다. 저장기간에 따른 총균수의 변화는 무처리와 알코올을 처리한 경우가 polyethylene film을 부착한 경우에 비하여 증가폭이 컸으나 젖산균수는 반대로 polyethylene film을 부착한 경우가 무처리 또는 알코올을 분무한 경우에 비하여 높아 김치의 품질이 양호하였다. 무처리와 알코올을 분무한 김치의 표면에는 저장 15일 이후에 산막표모 및 곰팡이의 균사체가 번식하는 김치도 발견되었다. 처리별 이미 및 이취의 발생정도를 조사한 결과 무처리와 알코올을 처리한 경우는 저장 15일경에 특히 용기 표면에 위치하는 김치에서 이미와 이취가 있었으나 polyethylene film을 부착한 경우는 이미와 이취가 전혀 나타나지 않았다.채반에 넣고 밀도를 측정한 결과 1.002g/㎤을 나타냈다. 즉 물의 이론밀도인 1g/㎤에 근접한 값을 보여 정확한 밀도 계측이 가능한 것으로 판단되었다. 또한 밀도 계측시스템의 측정 반복간 정밀도를 파악하기 위해 수박 6개를 임으로 선정하여 3반복 측정 시험한 결과, 측정표준편차가 0.001~0.004g/㎤로 해상도보다는 다소 높았으나 대체로 양호한 결과를 나타냈다. 수박 35개를 이용하여 개발 계측시스템과 사람이 직접 부력법으로 밀도를 측정 비교한 결과, 계측시스템에 의해 측정된 수박 밀도가 사람이 측정했을 때 보다 낮게 측정되었다. 수박의 외관인자(무게, 길이, 직경, 체적), 밀도와 당도의 상관관계 구명시험을 위해 원예연구소 시험포장에서 재배된 삼복꿀수박 총 74개를 공시재료로 하였고, 시험은 출수일별로 10~14개씩 수확하여 외관인자, 밀도, 당도를 각각 측정하고, 이들 인자들간의 상관관계를 구명하였다. 외관인자들간에는 높은 상관관계를 보였으나, 외관인자들과 밀도, 외관인자들과 당도, 밀도와 당도와는 매우 낮은 상관관계를 나타냈다. 점성에 영향을 미치는 가장 주요한 조건이라고 생각된다.환원당인 sucrose 함량은 계속 증가하였고 fructose, glucose, sorbitol의 함량(추황의 sorbitol을 제외)은 생장이 촉진됨에 따라 증가하다가 다시 점차적으로 감소하였다. 이러한 결과는 총당과 환원당의 측정결과와 일치한 것으로 나타났다. 결론적으로 배의 성장에 따라 산 함량은 감소하였고 당 함량은 증가하였다.luco-pyranoside, quercetin 7-O- -glucopyranoside, acacetin 7-O-$\beta$-D-glucuronide and apigenin-6-C-$\beta$-D-glucopyranosyl-8-C-$\b

• The korean journal of orthodontics
• /
• v.40 no.1
• /
• pp.6-15
• /
• 2010

Objective: The aim of this study is to find the most helpful midsagittal reference plane for diagnosis in PA cephalometry compared with 3D CT. Methods: The subjects consisted of 25 adults who showed no facial asymmetry by gross inspection. 3D CT and posteroanterior cephalogram of the subjects were taken. To find the most helpful midsagittal reference plane in PA cephalometry, we considered five kinds of midsagittal planes from which the distances to five landmarks were measured and compared the result with that of 3D CT. The midsagittal plane for 3D CT was determined by the landmarks Nasion, Sella and Basion. Results: PA measurements using the midsagittal reference plane on a perpendicular plane lying through the midpoint of the right and left latero-orbitales was closest to those of 3D CT. Conclusions: It was considered that latero-orbitale perpendicular could be used as the helpful midsagittal reference plane to assess facial asymmetry in PA cephalometry.

• Journal of Korea Multimedia Society
• /
• v.11 no.7
• /
• pp.1007-1015
• /
• 2008

In order to provide real-time data from sensors and instruments at manufacturing processes on web, we proposed a communication service model based on XML(eXtensible Markup Language). HTML(Hyper Text Markup Language) is inadequate for describing real-time data from manufacturing plants while it is suitable for display of non-real-time multimedia data on web. For applying XML-based web service of process data in Intranet environment, real-time performance of communication services was evaluated to provide the system design criteria. XML schema for the data presentation was proposed and its communication performance was evaluated by simulation in terms of transmission delay due to increased message length and processing delay for transformation of raw data into defined format. For transformation of raw data into XML format, we proposed two structures: one is the scheme where transformation is done at an SCC(Supervisory Control Computer) after receiving real-time data from instruments. the other is the scheme where transformation is carried out at instruments before the data are transmitted to the SCC. Performances of two structures were evaluated on a testbed under various conditions such as six packet sizes and offered loads of 20%, 50% and 80%, respectively. Test results show that proposed schemes are applicable to the systems in Ethernet 100BaseT network if total message traffic is less than 7 Mbps.

• Journal of dental hygiene science
• /
• v.15 no.2
• /
• pp.98-105
• /
• 2015

We investigated the effects of a mutan (water-insoluble ${\alpha}$-glucans) isolated from Streptococcus mutans on the healing of bone defect in rat. Sprague-Dawley rats were divided into control (saline-treated), lipopolysaccharide (LPS)-treated, and mutan-treated groups (n=6 per group). Experimental bone defects were surgically created with round fissure bur at the buccal surface of the left mandibular. The control groups was administered with saline solution (0.1 ml/100 g), while the LPS and mutan group was given LPS and mutan (1 mg/kg body weight) three times weekly. After 4 weeks the rats were sacrificed, the healing of bone defect was assessed by bone mineral density (BMD) and micro-computed tomography (${\mu}CT$) examination. Percent bone volume (bone volume/tissue volume [BV/TV]), trabecular thickness (Tb.Th), and trabecular number (Tb.N) parameters of ${\mu}CT$ showed higher values in control group than LPS and mutan group. Bone surface/volume ratio (BS/BV), trabecular bone pattern factor (Tb.Pf), and structure model index parameters of ${\mu}CT$ showed higher values in LPS group than mutan group. BMD values of mutan treated-alveolar bones were significantly lower for than that of the LPS group. Therefore, we suggest that mutan, water-insoluble ${\alpha}$-glucans from S. mutans may be induce the induction of periodontal diseases.

• Journal of Energy Engineering
• /
• v.16 no.3
• /
• pp.120-127
• /
• 2007

The purpose of this study is experimentally to analyze that the fuel mass fractions of multi-component mixed fuels have an effect on the characteristics of spray ignition and combustion under the ambient conditions of diesel combustion fields. The characteristics of ignition and combustion were investigated by chemiluminescence images and direct photography. The experiments were conducted in the RCEM(rapid compression expansion machine) with optical access. Multi-component fuels mixed with i-octane, n-dodecane and n-hexadecane are injected in RCEM by the electronic control of common rail injector. Experimental conditions set up 42, 72 and 112 MPa in injection pressure, 700, 800 and 900 K in ambient gas temperature. The results show that the ignition delay was dependent on high cetane number. In case of low ambient temperature, the more low boiling point fuels were mixed, the lower luminance regime had a remarkable effect and also shortened diffusion combustion by increasing heat release rate.

• Journal of the Korean Geosynthetics Society
• /
• v.5 no.2
• /
• pp.45-50
• /
• 2006

Although the discharge capacity of the natural fiber drains are very low compared to that of plastic drain board (PDB), it is found that the conventional fiber drains and the new developed straw drain boards have great potential for use as a substitute for conventional plastic drain boards through several model tests. To verify their field application, a pilot test using environmentally friendly drains is also being carried out to prove their effective discharge capacity in the field. The pilot test site was divided into 5 different areas, with various combinations of vertical and horizontal drains installed for evaluation. Definite characteristics of various drains are still to be found due to the delay in construction of embankment. Consolidation behavior of three types of vertical drains and two types of horizontal drains will be analyzed after the completion of the embankment in the near future.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.133-141
• /
• 2021

The development and demand for the system that provides users with traffic information and efficient road use have continued. also, this system provides the basic technology of the Intelligent Transport System (ITS). The most used traffic information collection tools are Vehicle detectors (VDS) and short-range wireless communication (DSRC) on express way. In order to generate reliable traffic information, it is necessary to efficiently manage and utilize the collected data as well as high-quality traffic data collection and processing technology. In this study, traffic information collection·processing·provision systems were investigated, and analyze the current status and problems of traffic information collected through VDS. Based on this, we would like to present an improved collection algorithm that utilizes the Kalman filter for vehicle information measurement of VDS data. By using the algorithm of this study, it is possible to minimize the time delay of the estimated value as well as the noise removal that inevitably occurs during measurement.

• Journal of the Korean Geosynthetics Society
• /
• v.18 no.3
• /
• pp.55-67
• /
• 2019

Deep soft ground in mouth of Nackdong river requires to be analysed with prediction method concerning characteristics of secondary consolidation from the beginning because it causes excessive settlement due to time-dependant secondary consolidation characteristics. This study investigated characteristics of extended settlement by conducting one-dimensional theory, elasto-plastic model and visco-elasto-plastic model as well as analyzing long-term measuring data observed over 2,000 days. According to one-dimensional theory and elasto-plastic model, there is not definite correlation between height of embankment and depth of soft ground while visco-elasto-plastic model showed similar result of settlement to that of long-term measuring data. Consequently it is suggested that applying visco-elasto-plastic model to developing deep underground place as studied area on predicting extended settlement before construction prevents economic loss and delay during process by preparing secondary consolidation characteristics.

• Explosives and Blasting
• /
• v.40 no.2
• /
• pp.25-34
• /
• 2022

Recently, there has been an increasing number of cases of improving constructability by using electronic detonators with precise delay time in tunnel blasting sites. This case is a case of conducting test blasting using with non-electric detonator and electronic detonator at the site of 『Seoul Metropolitan Area Express Railroad Route A Private Investment Project Section 00』 that requires careful management of vibration and noise. Although this site was designed with a non-electric detonator, it was attempted to improve the advance rate and control vibration and noise by mixing the non-electric detonator and the electronic detonator due to the decrease in the advance rate. As a result of the blasting, the target value was achieved with an advance rate of about 85% and a maximum measured value of vibration and noise is 0.215cm/sec and 73.22dB(A) which were measured below regulatory standards. As blasting works in downtown areas, it is necessary to designate measurement and management objects to continuously manage vibration and noise.