• Journal of Applied Biological Chemistry
• /
• v.61 no.2
• /
• pp.195-204
• /
• 2018

Pesticide residue in the eggs in the market has become a significant problem in Korea. In particular, the detection of fipronil indicated that unregulated pesticide residue can be present in livestock products, including eggs. Institutionally unregulated pesticides are a risk to human health and the ecosystem. In this study, we analyzed the system of agricultural pesticide management in Korea, the European Union, and the United States of America (USA) and discussed the problems of the Korean management system and the possible improvement directions. Based on the analysis, we considered three tasks: registration of pesticides, pesticide residue levels in food, and pesticide residue levels in environmental media. The registration of pesticides was conducted by the Ministry of Agriculture, Food, and Rural Affairs in Korea; the Directorate-General for Health and Food Safety in the European Commission (EC); and the US Environmental Protection Agency (USEPA) in the USA. The work regarding pesticide residue levels in food was conducted by the Ministry of Food and Drug Safety in Korea, the Directorate-General for the Health and Food Safety in the EC, and the USEPA and Food and Drug Administration in the USA. The work regarding pesticide residue levels in environmental media was conducted by the Ministry of Environment in Korea, the Directorate-General for Environment in the EC, and the USEPA in the USA. Therefore, Korea should review the extension of pesticide residue standards in the environmental media for strengthening the system of management of unregulated agricultural pesticides.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.3
• /
• pp.543-560
• /
• 2018

With the increased development in downtown underground space facilities that vertically cross under a railway at a shallow depth, the demand for non-open cut method is increasing. However, most construction sites still adopt the pipe roof method, where medium and large diameter steel pipes are pressed in to form a roof, enabling excavation of the inside space. Among the many factors that influence the loosening region and loads that occur while pressing in steel pipes, the size of the pipe has the largest impact, and this factor may correspond to the magnitude of load applied to the underground structure inside the steel pipe roof. The super equilibrium method (SEM) has been developed to minimize ground disturbance and loosening load, and uses small diameter pipes of approximately 114 mm instead of conventional medium and large diameter pipes. This small diameter steel pipe is called an SEM pile. After SEM piles are pressed in and the grouting reinforcement is constructed, a crossing structure is pressed in by using a hydraulic jack without ground subsidence or heaving. The SEM pile, which plays the role of timbering, is a fore-poling pile of approximately 5 m length that prevents ground collapse and supports surface load during excavation of toe part. The loosening region should be adequately calculated to estimate the spacing and construction length of the piles and stiffness of members. In this paper, we conducted a comparative analysis of calculations of loosening load that occurs during the press-in of SEM pile to obtain an optimal design of SEM. We analyzed the influence of factors in main theoretical and empirical formulas applied for calculating loosening regions, and carried out FEM analysis to see an appropriate loosening load to the SEM pile. In order to estimate the soil loosening caused by actual SEM-pile indentation and excavation, a steel pipe indentation reduction model test was conducted. Soil subsidence and soil loosening were investigated quantitatively according to soil/steel pipe (H/D).

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.8 no.4
• /
• pp.347-353
• /
• 2010

Source terms of metal waste comprising a spent fuel assembly are relatively important when the spent fuel is pyroprocessed, because cesium, strontium, and transuranics are not a concern any more in the aspect of source term of permanent disposal. In this study, characteristics of radiation source terms for each structural component in spent fuel assembly was analyzed by using ORIGEN-S with a assumption that 10 metric tons of uranium is pyroprocessed. At first, mass and volume for each structural component of the fuel assembly were calculated in detail. Activation cross section library was generated by using KENO-VI/ORIGEN-S module for top-end piece and bottom-end piece, because those are located at outer core with different neutron spectrum compared to that of inner core. As a result, values of radioactivity, decay heat, and hazard index were reveled to be $1.40{\times}10^{15}$ Bequerels, 236 Watts, $4.34{\times}10^9m^3$-water, respectively, at 10 years after discharge. Those values correspond to 0.7 %, 1.1 %, 0.1 %, respectively, compared to that of spent fuel. Inconel 718 grid plate was shown to be the most important component in the all aspects of radioactivity, decay heat, and hazard index although the mass occupies only 1 % of the total. It was also shown that if the Inconel 718 grid plate is managed separately, the radioactivity and hazard index of metal waste could be decreased to 20~45 % and 30~45 %, respectively. As a whole, decay heat of metal waste was shown to be negligible in the aspect of disposal system design, while the radioactivity and hazard index are important.

• Korean Journal of Microbiology
• /
• v.52 no.4
• /
• pp.463-470
• /
• 2016

The enzymatic degradation of xylans is the most versatile way to obtain the high value-added functional compounds or the fermentable sugars for renewable energy. The endo-${\beta}$-xylanases are the major enzymes which hydrolyze the internal ${\beta}$-1,4-linkages of xylan backbones to produce the mixtures of xylooligosaccharides including xylobiose and xylotriose. Among them, glucuronoxylanase GH30 can exclusively hydrolyze the internal ${\beta}$-1,4-linkages of xylans decorated with methylglucuronic acid branches. In the present study, two xylanolytic enzyme (PaXN_10 and PaGuXN_30) genes were cloned from Paenibacillus amylolyticus KCTC 3005, and expressed in Escherichia coli, respectively. PaXN_10 (38.7 kDa) belongs to the endo-${\beta}$-xylanases GH10 family, while PaGuXN_30 (58.5 kDa) is a member of glucuronoxylanase GH30. They share the same optimal reaction conditions at $50^{\circ}C$ and pH 7.0. Enzymatic characterization proposed that P. amylolyticus can utilize the hardwood glucuronoarabinoxylans via the cooperative actions of xylanases GH10 and GH30. The extracellular PaGuXN_30 is secreted into the medium and hydrolyzes glucuronoarabinoxylans to release a series of aldouronic acid mixtures with a methylglucuronic acid branch. The resultant products being transported into the microbial cell are successively degraded into the smaller xylooligosaccharides by the intracellular PaXN_10, which will be utilized for the cellular metabolism.

• Journal of Korea Water Resources Association
• /
• v.53 no.2
• /
• pp.107-119
• /
• 2020

This study analyzed past drought characteristics based on the observed rainfall data and performed a long-term outlook for future extreme droughts using Representative Concentration Pathways 8.5 (RCP 8.5) climate change scenarios. Standardized Precipitation Index (SPI) used duration of 1, 3, 6, 9 and 12 months, a meteorological drought index, was applied for quantitative drought analysis. A single long-term time series was constructed by combining daily rainfall observation data and RCP scenario. The constructed data was used as SPI input factors for each different duration. For the analysis of meteorological drought observed relatively long-term since 1954 in Korea, 12 rainfall stations were selected and applied 10 general circulation models (GCM) at the same point. In order to analyze drought characteristics according to climate change, trend analysis and clustering were performed. For non-stationary frequency analysis using sampling technique, we adopted the technique DEMC that combines Bayesian-based differential evolution ("DE") and Markov chain Monte Carlo ("MCMC"). A non-stationary drought frequency analysis was used to derive Severity-Duration-Frequency (SDF) curves for the 12 locations. A quantitative outlook for future droughts was carried out by deriving SDF curves with long-term hydrologic data assuming non-stationarity, and by quantitatively identifying potential drought risks. As a result of performing cluster analysis to identify the spatial characteristics, it was analyzed that there is a high risk of drought in the future in Jeonju, Gwangju, Yeosun, Mokpo, and Chupyeongryeong except Jeju corresponding to Zone 1-2, 2, and 3-2. They could be efficiently utilized in future drought management policies.

• Journal of the Korean Chemical Society
• /
• v.34 no.2
• /
• pp.143-158
• /
• 1990

Metal complexes were prepared by reacting uranium (Ⅵ), thorium (Ⅳ) and rare earth metal (Ⅲ) ions including Nd (Ⅲ), Sm (Ⅲ) and Ho (Ⅲ) with macrocyclic ligands including five crown ethers, nine crownands and one cryptand ligands, and subjected to NMR studies in order to examine coordination sites of the ligands and compositions of the complexes formed. Among the marcocyclic ligands, crown ethers and crownand ligands have shown down-field shifts of the methylene protons of the lcigands by forming stable complexes with all the metal ions and the differences of chemical shifts were decreased as increasing of the cavity-size of crown ethers for the same metal ions and decreasing of the atomic number of the rare earth metals for the same ligands. It has been found that crownand 22 gave a stable complex with uranium(Ⅵ) ion by the coordination through both oxygen and nitrogen atoms of the ligand whereas no complex was formed with the rare earth metal(Ⅲ) ions, which on the other hand were found to form stable complexes with cryptand 221. The rest of the crowand ligands have also been found to form stable complexes with uranium(Ⅵ) ion by coordinating through all the oxygen and nitrogen atoms of the ligands whereas no complexes were formed with the rare earth metal(Ⅲ) ions. It has also been shown by 1H-NMR study that uranium(Ⅵ), thorium(Ⅳ) and rare earth metal(Ⅲ) ions formed 1:1 complexes with the macrocyclic ligands except for thorium(Ⅳ) complex of 12C4 in which the mole ratio of metal to ligand is 1:2. More stable metal complexes show larger changes in chemical shifts of the coordinated ligand protons. Finally, the rare earth metal(Ⅲ) complexes of 18C6 have shown ligand exchange reaction with the solvent molecules in acetylacetone solution, which was not observed for the uranium (Ⅵ) complexes.

• Journal of Korean Home Economics Education Association
• /
• v.17 no.2
• /
• pp.197-219
• /
• 2005

This study attempted, in accordance with the National Educational Curriculum, to develop achievement assessment standards for a course within the field of home economics which has been widely adopted by Korean vocational high schools, namely, the food and nutrition subject. Focus was also placed on strengthening the management of the curriculum for this food and nutrition course, as well as on establishing proper assessment standards by developing model assessment tools which can be used to assess the subject. The results of this study can be summarized as follows : First, based on an analysis of the related literature and materials. the desired notion of the achievement and assessment standards was established, and their significance ascertained the achievement and assessment standards for the food and nutrition course were set and the type of model assessment tool which should be developed, as well as the method in which it should be applied. was established Second. by analyzing the curriculums and the contents of the textbooks used in the food and nutrition subject, the researcher was able to compile the 70 factors which could to be used to develop the achievement and assessments standards, and then classify these into 6 main categories and 32 sub-categories. Based on the characteristics of these factors and learners' academic performance levels the number of factors was expanded to 89 in order to establish the achievement standards. In turn, these achievement standards were used, in accordance with the learners' achievement and teaming activity levels, to develop three different levels of assessment standards. namely, upper, middle, and lower ones. Third. a model assessment tool was developed which could be used by individual school units as a reference in terms of achievement and assessment standards, and that could be modified to meet each school's circumstances. In order to create the model assessment tool a 100-question questionnaire was formulated that contained various types of questions, such as essay, report, theoretical and practical, portfolio, as well as multiple choice-type questions. Lastly, the researcher introduced measures to effectively use the achievement and assessment standards developed for the food and nutrition course, as well as the model assessment tool in school units.

• Journal of the Korean Electrochemical Society
• /
• v.19 no.3
• /
• pp.69-79
• /
• 2016

Lithium ion battery with high energy density is expanding its application area to electric automobile and electricity storage field beyond existing portable electric devices. Such expansion of an application field is demanding higher characteristic and stable long life characteristic of an anode material, the natural graphite that became commercialized in lithium ion battery. This thesis produced cathode by using natural graphite anode material, analyzed creation of the cathode SEI film created due to initial reaction by using electrolyte additives, VC (vinylene carbonate), VEC (vinyl ethylene carbonate), and FEC (fluoroethylene carbonate), and considered correlation with the accompanying electrochemical transformation. This study compared and analyzed the SEI film variation of natural graphite cathode according to the electrolyte additive with SEI that is formed at the time of initial filling and cathode of $60^{\circ}C$ life characteristic. At the time of initial filling, the profile showed changes due to the SEI formation, and SEI was formed in No-Additive in approximately 0.9 V through EVS, but for VC, VEC, and FEC, the formation reaction was created above 1 V. In $60^{\circ}C$ lifespan characteristic evaluation, the initial efficiency was highest in No-Additive and showed high contents percentage, but when cycle was progressed, the capacity maintenance rate decreased more than VC and FEC as the capacity and efficiency at the time of filling decreased, and VEC showed lowest performance in efficiency and capacity maintenance rate. Changes of SEI could not be verified through SEM, but it was identified that as the cycle of SEI ingredients was progressed through FT-IR, ingredients of Alkyl carbonate ($RCO_2Li$) affiliation of the $2850-2900cm^{-1}$ was maintained more solidly and the resistance increased as cycle was progressed through EIS, and specially, it was identified that the resistance due to No-Additive and SEI of VEC became very significant. Continuous loss of additives was verified through GC-MS, and the loss of additives from partial decomposition and remodeling of SEI formed the non-uniform surface of SEI and is judged to be the increase of resistance.

• Journal of Korean Society of Transportation
• /
• v.22 no.7 s.78
• /
• pp.155-159
• /
• 2004

Recently, there are many trials about Artificial neural networks : ANNs structure and studying method of researches for forecasting traffic volume. ANNs have a powerful capabilities of recognizing pattern with a flexible non-linear model. However, ANNs have some overfitting problems in dealing with a lot of parameters because of its non-linear problems. This research deals with the application of a variety of model selection criterion for cancellation of the overfitting problems. Especially, this aims at analyzing which the selecting model cancels the overfitting problems and guarantees the transferability from time measure. Results in this study are as follow. First, the model which is selecting in sample does not guarantees the best capabilities of out-of-sample. So to speak, the best model in sample is no relationship with the capabilities of out-of-sample like many existing researches. Second, in stability of model selecting criterion, AIC3, AICC, BIC are available but AIC4 has a large variation comparing with the best model. In time-series analysis and forecasting, we need more quantitable data analysis and another time-series analysis because uncertainty of a model can have an effect on correlation between in-sample and out-of-sample.

• 대한공업교육학회지
• /
• v.38 no.2
• /
• pp.89-113
• /
• 2013

The study started from the point that learners should be basically equipped to quickly respond to changes in demand for future human resources efficiently and effectively, and an attitude to take part in learning voluntarily should thus be cultivated. To this end, the author applied the TAI model based on a module as a class strategy to solve problems related to several classes occurred in specialized high schools. This application of the TAI model was also motivated by the necessity for designing an appropriate teaching-learning method that encourages improvement of self-learning capacity, consistent learning motivation, and willingness rather than external factors. Through this work, the author aims to heighten the interest of learners and improve endurance in learning. The study results are as follows. First, the learning unit was structuralized as a module and then learning stages were proceeded with so that capacity to adapt to learning would improve. The achievement standard (learning goal) was structuralized in a module type by analyzing and reorganizing the textbook considering the link between the actual practice field and a curriculum based on subject characteristics. Through the process of module type learning stages, the student's capacity to ascertain characteristics of units and to adapt to learning both improved. Second, through application of a TAI model based on a module, Self-Directed Learning capacity and capacity to adapt to a new field improved. By applying the module, Self-Directed Learning could be accomplished more effectively than in the existing passive learning environment. By grafting cooperative learning of the TAI model, students had greater interest and achievement in classes, self-confidence and community consciousness, and an opportunity to broaden their thinking. In particular, improvement of self-confidence is effective in cultivating the capacity required in industrial society to transcend the learning of simple functions and knowledge, as well as the capacity to adapt to new environments. Third, by solving tasks focused on fields related to industrial sites, not only actual survey capacity but also additional capacity to identify and solve tasks through various experiences improved. Furthermore, it was helpful for students to have interest and motivation about their own life and learning to cultivate the qualities and capacity to adapt to the working world where new knowledge and technology rapidly change. Fourth, by applying a standard-based assessment system for technical subjects introduced in 2012 to model design for learning plans, clearer and more objective assessment criteria were arranged, and individual learning through instruction at each achievement level could be accomplished. This improved achievement level of individual learners was helpful in reaching achievement goals at specific levels by overcoming the disadvantages of cooperative learning in each group.