• Journal of the Korean earth science society
• /
• v.38 no.4
• /
• pp.269-282
• /
• 2017

In this study, the surface broadband emissivity ($3.0-14.0{\mu}m$) was calculated using the multiple linear regression model with narrow bands (channels 29, 30, and 31) emissivity data of the Moderate Resolution Imaging Spectroradiometer (MODIS) on Earth Observing System Terra satellite. The 307 types of spectral emissivity data (123 soil types, 32 vegetation types, 19 types of water bodies, 43 manmade materials, and 90 rock) with MODIS University of California Santa Barbara emissivity library and Advanced Spaceborne Thermal Emission & Reflection Radiometer spectral library were used as the spectral emissivity data for the derivation and verification of the multiple linear regression model. The derived determination coefficient ($R^2$) of multiple linear regression model had a high value of 0.95 (p<0.001) and the root mean square error between these model calculated and theoretical broadband emissivities was 0.0070. The surface broadband emissivity from our multiple linear regression model was comparable with that by Wang et al. (2005). The root mean square error between surface broadband emissivities calculated by models in this study and by Wang et al. (2005) during January was 0.0054 in Asia, Africa, and Oceania regions. The minimum and maximum differences of surface broadband emissivities between two model results were 0.0027 and 0.0067 respectively. The similar statistical results were also derived for August. The surface broadband emissivities by our multiple linear regression model could thus be acceptable. However, the various regression models according to different land covers need be applied for the more accurate calculation of the surface broadband emissivities.

• Journal of Biomedical Engineering Research
• /
• v.24 no.2
• /
• pp.133-140
• /
• 2003

In this study, muscle activity was measured using surface EMG (sEMG) during a voluntary maneuver (ankle dorsiflexion) in the supine position was compared pre and post gait training. Nine patients with incomplete spinal cord injury participated in a supported treadmill ambulation training (STAT), twenty minutes a day, five days a week for three months. Two tests, a gait speed test and a voluntary maneuver test, were made the same day, or at least the same week, pre and post gait training. Ten healthy subjects' data recorded using the same voluntary maneuvers were used for the reference. sEMG measured from ten lower limb muscles was used to observe the two features of amplitude and motor control distribution pattern, named response vector. The result showed that the average gait speed of patients increased significantly (p〈0.1) from 0.47$\pm$0.35 m/s to 0.68$\pm$0.52 m/s. In sEMG analysis, six out of nine patients showed a tendency to increase the right tibialis anterior activity during right ankle dorsiflexion from 109.7$\pm$148.5 $mutextrm{V}$ to 145.9$\pm$180.7 $mutextrm{V}$ but it was not significant (p〈0.055). In addition, only two patients showed increase of correlation coefficient and total muscle activity in the left fide during left dorsiflexion. Patients' muscle activity changes after gait training varied individually and generally depended on their muscle control abilities of the pre-STAT status. Response vector being introduced for quantitative analysis showed good Possibility to anticipate. evaluate, and/or guide patients with SCI, before and after gait training.

• Korean Journal of Environmental Agriculture
• /
• v.20 no.4
• /
• pp.203-210
• /
• 2001

In order to environmentally use wood chips manufactured from low valued forest resources by forest tendering, wood chips were used for the evaluation on chips characteristics, decomposition capability of organic wastes, and field experiment and determination of conditions for decomposer. Bioclusters manufactured by Cryptomeria japonica, commercially available wood chips in Japan, showed higher pore ratio, water reservation and water resistance, and higher cellulose content with lower hot water solubles than domestic wood chips. The useful size of wood chips for swine manure decomposition was 10 (length) ${\times}$ 5 (width) ${\times}$ 2 (thickness) mm, and cellulose contents and alkali solubles of Pinus densiflora and Populus tomentiglandulosa were similar to those of bioclusters. According to the decomposition ratio depending on wood species, it was ordered as Pinus densiflora > Pinus koraiensis > Cryptomeria japonica. The swine manure decomposition ratio depending on treatment hours by Pinus koraiensis was constant with the ratio of 15 to 16 g per hour by 1 kg of chip, indicating of daily swine decomposition amount of 390 kg by 1 ton of chips which was equal to the amount of daily swine manure production by 70 swines. Analyzing by long term used wood chips during 40 days treatment, the treated wood chips characteristically showed stable total nitrogen content, suitable pH, high accumulation of inorganic contents such as calcium, phosphorus, potassium and sodium, and no odor. During winter, the inner temperature of decomposer was kept at $43^{\circ}C$, but air bubble was occurred due to high pH and viscosity of swine manure. The most appropriate mixing ratio between wood chips and swine manure was 1 versus 2 or 3, and at more than ratio 1 versus 3, ammonia gas was caused because of anaerobic fermentation status by high moisture content of wood chips. The mixing interval of decomposer was 3 mins. per hour for the best swine decomposition.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.65 no.4
• /
• pp.303-313
• /
• 2020

Rice grain shape is one of the key components of grain yield and market value. An understanding of the genetic basis of the variation in grain shape could be used to improve grain shape. In this study, we developed a total of 265 F₂ individuals derived from a cross between japonica cultivars (Josaeng-jado and Langi) and used this population for quantitative trait locus (QLT) analysis. Correlation analysis was performed to identify relationships between grain traits (GL: grain length, GW: grain width, L/W: ratio of length to width, TGW: 1,000 grain weight). The grain shape was positively correlated with GL and TGW, and negatively correlated with GW. In QTL analysis associated with grain shape, one QTL for GL, qGL5, detected on chromosome 5, explained 20.3% of the phenotypic variation (PV), while two QTLs, qGW5 (PV=36.1) and qGW7 (PV=26.1), for GW were identified on chromosomes 5 and 7, respectively. Evaluation of the effects of each of the QTLs on the grain shape in the population showed a significant difference in the grain size in positive lines compared with the lines without the QTLs. According to the QTL combination of the allelic-types, the grain shape of the tested lines varied from semi-round type to long spindle-shaped type. The results of this study extend our knowledge about the genetic pool governing the diversity of grain shape in japonica cultivars and could be used to improve the grain shape of this species through marker-assisted selective breeding in Korea.

• Economic and Environmental Geology
• /
• v.40 no.3 s.184
• /
• pp.263-275
• /
• 2007

The purpose of this study was to show the pollution characteristics of hazardous elements from roadside dust in the Gwangju city. We collected 47 samples from November to December in 2004 and separated four groups such as residential area, industrialized area, downtown area and heavy traffic area fer characteristics comparison on hazardous elements. Roadside dust mostly consisted of quartz, albite, microcline, muscovite in XRD analysis. Content of hazardous elements varied: As $3.4{\sim}11.9 ppm$, Cd $0.2{\sim}28.2 ppm$, Co $32{\sim}526 ppm$, Cr $25{\sim}526 ppm$, Cu $11{\sim}375 ppm$, Ni $14{\sim}247 ppm$, Pb $13{\sim}413 ppm$ and Zn $101{\sim}972 ppm$. Average contents of hazardous elements of Zn>Cu>Pb>Cr>Co>Ni>Cd. Content of hazardous elements was low in residential area, whereas that of heavy metal was much the same in both in heavy traffic area. Content of hazardous elements such as Cd, Co, Cr, Cu, Ni, Pb, Zn was found to be particularly high in industrialized area. According to these results it was possible to presume that industrialized area was affected by industry activity such as machinery, petrochemical, automobile and electronics industry. The SEM analysis, detected Pb, Cr, Ni, and Fe particles in samples of industrialized area contaminated by industry activity. The correlation coefficient table resulted from the samples of roadside dust showed that there was same direction increase of content between elements. In other words, when the content of Cd increase, Cr and Ni increase, as Cr increase, Cu and Ni increase, as Cu increase Ni increase and Pb increase Zn increase. Based on these results it was possible to predict and interpret similar contamination patterns in this study.

• Korean Journal of Soil Science and Fertilizer
• /
• v.8 no.3
• /
• pp.121-133
• /
• 1975

Soils of the agricultural land derived mostly from volcanic ash in Jeju island may be characterized by relatively high PH, high contents of organic matter and exchangeable bases, and significantly low content of available phosphorus. The PH, organic matter, and available phosphorus of the soils in northern Jeju are 6.1, 12.6%, and 23 ppm, while those of the soils in the southern Jeju are 6.4, 3.7 %, and 76 ppm respectively. Upland soils in Jeju may be classified into 4 groups on the basis of soil fertility: black soil, very dark brown soil, dark brown, and red yellow soil. The organic matter content of black soil, very dark soil and dark brown soil is 15%, 7%, and 3% respectively. The soils of high organic matter content show the high phosphorus absorption coefficient, low content of available phosphorus, and low degree of the base saturation. The soil productivity for barley in the northern Jeju is higher than that in the southern Jeju and the productivity in the western Jeju is higher than that in the eastern part. The productivity for barley is in decreasing order of dark brown soil, very dark brown soil and black soil. Yields of potato and sweet potato in Jeju are higher than in the mainland. Those crops are considered to be tolerant to aluminumtoxicity. The response of sweet potato to nitrogen, phosphorus, and potassium in Jeju soils is lower than that in the mainland, while the response of barley and rape to nitrogen and phosphorus is higher than that in the mainland. The response to fertilizer applied is greater in the northern Jeju than in the southern Jeju. Lime requirement for the Jeju soils calculated on the basis of laboratory tests is so tremendous that single application of lime required might induce adverse effect. Most of the phosphorus applied to the Jeju soils is readily fixed as unavailable form and application of phosphorus in the level of 30 to 40 kg/10a is thought to give little effect.

• Korean Journal of Poultry Science
• /
• v.36 no.2
• /
• pp.165-175
• /
• 2009

Fatty liver-hemorrhagic syndrome (FLHS) is a common nutritional disease in commercial layers and breeders. The most important clinical sign of FLHS is a sudden drop in egg production and increased mortality which causes significant economic loss in the poultry industry. However, the current diagnostic method for FLHS is based on the gross findings at necropsy which is not helpful to reduce the economic loss because of lateness of diagnosis. Therefore, we need early diagnosis and diagnostic methods before chickens were affected by FLHS. In this study we tried to evaluate the effectiveness of clinical pathology including blood chemistry as an early diagnostic method for FLHS in commercial chickens. Profiles of blood biochemistry were compared between two flocks selected in the same commercial layer farm based on the presence of FLHS clinical sings. A flock with clinical signs of FLHS was designated as FLHS and other flock without clinical signs of FLHS as Non-FLHS. Several parameters of blood biochemistry were selected and compared between FLHS and Non-FLHS to evaluate the possibility of early diagnosis. Average concentrations of serum cholesterol, serum calcium, aspartate aminotransferase (AST), lactate dehydrogenase (LDH) and creatine kinase (CK) were $139.4\;{\pm}\;87.2$ (mg/dL), $24.5\;{\pm}\;5.4$ (mg/dL), $153.6\;{\pm}\;23.1$ (IU/L), $1238.3\;{\pm}\;475.2$ (IU/L) and $1107.3\;{\pm}\;422.8$ (IU/L) in Non-FLHS flock, respectively, and $210.2\;{\pm}\;173.2$ (mg/dL), $25.2\;{\pm}\;4.1$ (mg/dL), $174.3\;{\pm}\;53.5$ (IU/L), $1694.9\;{\pm}\;691.3$ (IU/L) and $1104.9\;{\pm}\;472.9$ (IU/L) in FLHS flock, respectively. The activities of serum cholesterol, AST and LDH except CK, were significantly higher in FLHS than those in Non-FLHS flock (p<0.05). Some birds of FLHS flock showed 2~17 times greater than in Non-FLHS flock. For the definitive diagnosis of FLHS in the flocks tested for blood chemistry, we analyzed fat content and histological lesion score in the liver sampled from both FLHS and Non-FLHS flock. Average liver fat contents based on dry weight were $16.1\;{\pm}\;0.4$ (%) in Non-FLHS flock and were $21.6\;{\pm}\;16.0$ (%) in FLHS flock. These result confirmed that FLHS flock was definitely affected by FLHS. The above results suggest that selected parameters of blood biochemistry, particularly AST, could be useful to diagnose FLHS before significant liver damage occurred in commercial layers.

• Korean Journal of Remote Sensing
• /
• v.29 no.1
• /
• pp.123-135
• /
• 2013

The reflectance observed in the visible channels of a geostationary meteorological satellite can be used to calculate the amount of cloud by comparing the reflectance with the observed solar radiation data at the ground. Using this, the solar radiation arriving at the surface can be estimated. This study used the Meteorological Imager (MI) reflectance observed at a wavelength of 675 nm and the Geostationary Ocean Color Imager (GOCI) reflectance observed at similar wavelengths of 660 and 680 nm. Cloudy days during a typhoon and sunny days with little cloud cover were compared using observation data from the geostationary satellite. Pixels that had more than 40% reflectance in the satellite images showed less than 0.3 of the cloud index and blocked more than 70% of the solar energy. Pixels that showed less than 15% reflectance showed more than 0.9 of the cloud index and let through more than 90% of the solar energy to the surface. The calculated daily accumulated solar radiation was compared with the observed daily accumulated solar radiation in 22 observatories of the Korean Meteorological Administration. The values calculated for the COMS and MTSAT MI sensors were smaller than the observation and showed low correlations of 0.94 and 0.93, respectively, which were smaller than the 0.96 correlation coefficient calculated for the GOCI sensor. The RMSEs of MTSAT, COMS MI and GOCI calculation results showed 2.21, 2.09, 2.02 MJ/$m^2$ in order. Comparison of the calculated daily accumulated results from the GOCI sensor with the observed data on the ground gave correlations and RMSEs for cloudy and sunny days of 0.96 and 0.86, and 1.82 MJ/$m^2$ and 2.27 MJ/$m^2$, respectively, indicating a slightly higher correlation for cloudy days. Compared to the meteorological imager, the geostationary ocean color imager in the COMS satellite has limited observation time and observation is not continuous. However, it has the advantage of providing high resolution so that it too can be useful for solar energy analysis.

• Journal of the Mineralogical Society of Korea
• /
• v.18 no.4 s.46
• /
• pp.277-288
• /
• 2005

Perlite, a hydrated volcanic glass, occurs mainly as a bed-like body, and is distributed intermittently along the unconformity surface between the Beomgockri Group and its lower formations, viz. Janggi Group. The perlite is intimately associated with surrounding pumiceous welded tuff and rhyodacites in space and time. Compared to the typical perlite, the perlite is rather silica-poor and impure, and thus, includes lots of phenocrysts and rock fragments. Nearly the perlite is compositionally rather close to a pitchstone than a perlite in water contents. Petrographic comparison between perlite and associated volcanic to volcaniclastic rocks indicates that pumiceous welded tuff and rhyodacite seem to be Protolith of the Perlite. A Zr/$TiO_{2}$-Nb/Y diagram and field occurrence of perlite and their protolithic rocks also conforms the above interpretation. Kn addition, remnant vesicles in perlite strongly reflect that the precursor of perlitic glass appeared to be pumice fragment as well as volcanic glass. The perlite was diagenetically formed by way of a pervasive water-rock interaction at the deposition of the Manghaesan Formation in lacustrine environment. During perlitization, $SiO_{2}$ and alkali tend to be consistently depleted. Preexisting system of the Beomgockri Group based on the perlite formation should be corrected, because the perlite was formed diagenetically without lateral persistence in its occurrence.

• Journal of the Korean earth science society
• /
• v.35 no.1
• /
• pp.1-18
• /
• 2014

The purpose of this study was to analyze the sensitivity of meteorological fields and the variation of concentration of particulate matters (PMs) due to aerosol schemes and dust options within the WRF-Chem model to estimate Asian dusts affected on 29 May 2008 in the Korean peninsula. The anthropogenic emissions within the model were adopted by the $0.5^{\circ}{\pm}0.5^{\circ}$ RETRO of the global emissions, and the photolysis option was by Fast-J photolysis. Also, three scenarios such as the RADM2 chemical mechanism and MADE/SORGAM aerosol, the MOSAIC 8 section aerosol, and the GOCART dust erosion were simulated for calculating Asian dust emissions. As a result, the scenario of the RADM2 chemical mechanism & MADE/SORGAM aerosol depicted higher concentration than the others' in both Asian dusts and the background concentration of PMs. By comparing of the daily mean of PM10 measured at each air quality monitoring site in Seoul with the scenario results, the correlation coefficient was 0.67, and the root mean square error was $44{\mu}gm^{-3}$. In addition, the air temperature, the wind speed, the planetary boundary layer height, and the outgoing long-wave radiation were simulated under conditions of no chemical option with these three scenarios within the WRF or WRF-Chem model. Both the spatial distributions of the PBL height and the wind speed of u component among the meteorological factors were similar to those of the Asia dusts in range of 1,800-3,000 m and $2-16ms^{-1}$, respectively. And, it was shown that both scenarios of the RADM2 chemical mechanism and MADE/SORGAM aerosol and the GOCART dust erosion were interacted on-line between meteorological factors and Asian dusts or aerosols within the model because the outgoing long-wave radiation was changed to lower than the others.