• Journal of Ocean Engineering and Technology
• /
• v.2 no.1
• /
• pp.116-124
• /
• 1988

해양구조물의 원통조인트에 대한 피로 수명 산출이 전통적으로 실험적 방법에만 의존해 왔음은,원통조인트의 구조가 복잡하여 용접부위 균열의 응력확대 계수 계산이 거의 불가능 했든 것이 주 원인이었다. 최근에 유한요소 3차원 모델을 이용한 계산방법이 개발되어 심히 구조적으로 복잡한 표면 균열의 응력확대계수 산출이 용이하게 되었다. 해양 구조물의 원통조인트에 대한 피로 수명 산출법을 개발하기 위한 연속되는 3부작의 제1부로서 본 논문은 X형 원통 조인트 용접주위 표면 균열의 응력확대 계수 거동을 분석하고 있다. 분석결과를 이용하여 응력확대계수를 엄격한 방법에 의해 계산하였다. 계산된 응력확대계수를 구조적인 관점에서 해석하고 있다.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.1 no.3
• /
• pp.210-218
• /
• 1989

The ASHRAE Simplified Energy Analysis Procedure using the Modified Bin Method(SEAP) is compared with the hourly calculation program, HASP/ACLD. The HASP/ACLD model office building with VAV system in Seoul is used as the basis for comparison. And the parameters considered are glass to wall area ratio and internal heat gains. The results show that SEAP predictions of annual energy use agree with HASP/ACLD predictions within 5% deviation. But there is a large difference in cooling and heating energy as glass to wall area ratio is varied. The SEAP cooling energy is 65-85% and the heating energy is 104-160% of the HASP/ACLD results. This is probably due to the solar heat gain data. the data related to the SEAP must be developed prior to use it.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2010.05a
• /
• pp.679-683
• /
• 2010

본 연구에서는 공간적 변수인 조도계수를 기지의 수위값을 이용하여 최적값을 결정하는 방법에 대해서 검토하고자 한다. 최적화 기법에 의한 조도계수는 기지의 수위값과 수치모의에 의한 결과 값의 전체 오차를 최소화하는 값으로 결정된다. 본 연구에서는 3가지 최적화 기법을 이용하였으며 가상 수로에 대해서 적용하였다. 수위계산은 표준축차법에 의해 수행하였으며 사용된 최적화 기법은 quasi-Newton 방법이다. 1차원 모형은 Matlab을 이용하여 표준축자법으로 구성하였으며 BFGS 기법, L-BFGS 기법, Steepest Gradient Descent 기법 등도 Matlab으로 구성하였다. 표준축차법은 조도계수가 입력되면 기지의 수위값과의 2-norm을 계산하도록 구성하였다. 계산 결과에 의하면 세가 기법 모두 20 23회 정도의 반복계산을 수행하고 값이 수렴되었는데, L-BFGS의 경우에는 정확하게 음수의 조도계수로 수렴하였으며, BFGS기법과 Steepest Gradient 기법의 경우에는 양의 값으로 정확하게 수렴하였다.

• Journal of Energy Engineering
• /
• v.15 no.4 s.48
• /
• pp.250-255
• /
• 2006

In this study, the discrete ordinates method which has been widely used in the solution of neutron transport equation is applied to the solution of the time dependent radiative transfer equation. The self-adjoint form of the second order radiation intensity equation is used to enhance the stability of the solution, and a new multi-step linearization method is developed to avoid the nonlinearity in the material temperature equation. This new solution method is applied to the well known Marshak wave problem, and the numerical result is compared with that of the conventional Monte-Carlo method.

• Journal of the Society of Naval Architects of Korea
• /
• v.33 no.2
• /
• pp.65-74
• /
• 1996

For the structural analysis of ship structures finite element method is generally used but it requires lots of working and computing time from the design viewpoint. Therefore, it is desirable to adopt a new analysis method which gives little computing time and high accuracy instead of finite element method to carry out various alternative design and optimum design. In this study, from the analysis viewpoint, structural analysis of oil tankers is carried out to verify the effectiveness of the generalized slope deflection method and the new equivalent curved beam theory which were formulated by the authors and their superiority is verified by comparison of the computing time and the results of accuracy with existing methods.

• Journal of Navigation and Port Research
• /
• v.28 no.3
• /
• pp.199-205
• /
• 2004

We have developed a composite grid method for the solution of the radiation problem We divide the domain into two different grids; one is a moving grid system and the other is a fixed grid system. This numerical method is applied to calculation of the radiation forces generated by the submerged plate oscillating near a free surface. The experimental data are compared with the numerical ones obtained by the present method and a linear potential theory. As a result, we can confirm the accuracy of the present method. Finally, Lie have evaluated the effect of nonlinear and viscous damping on the hydrodynamic forces acting on the submerged plate.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.5
• /
• pp.61-68
• /
• 2001

In this paper, an analytical method and a difference approximation method to calculate the gradient of an objective function have been applied to the directivity optimization in an adaptive ultrasonic transducer which is combined with a point source array and an optimization algorithm (DFP method). To compare these two methods, quasi-ideal .beam with a beam width and direction specified are chosen as the desired directivity. As the numerical results, the difference approximation method shows better suppressive capacity of side lobe level, good stability in the convergence processing, faster convergence speed and excellent adaptability compared with the analytical method.

• Journal of the Society of Naval Architects of Korea
• /
• v.29 no.4
• /
• pp.1-6
• /
• 1992

The finite difference simulation method for ship waves is introduced for hull form improvement. Numerical simulations were performed for a series of modified hull forms and the simulated results were used for the determination of the better hull forms. A 4,400 TEU container carrier which was designed and experimented in towing tank was chosen for the purpose. The calculation results are compared with those of model test, of simplified Neumann-kelvin problems and of Rankine source method. In this study, it is shown that the combination of the computer simulation by our method with the experiment provides one of the most economical and reliable procedures of hull form improvement and that the degree of accuracy of this method is so high that it can cope with very practical design purposes.

• Journal of the Korean Magnetics Society
• /
• v.9 no.1
• /
• pp.64-70
• /
• 1999

The inrush current of transformer can flow when the overvoltage caused by surge or external faults is applied. In this paper, an algorithm for the calculation of this inruch current is proposed. The capacitances of windings are precalculated by using 3 dimensional FEM and are appended to circuit of the transformer. And transient characteristics of the transformer are analyzed by axisymmetric FEM which is coupled magnetic field of transformer and circuit of transformer. When a transformer encounters abnormal voltage, using the proposed method, internal magnetic field of transformer, voltages and currents of windings are calculated.

• Journal of the Society of Naval Architects of Korea
• /
• v.31 no.3
• /
• pp.87-99
• /
• 1994

Reynolds Averaged Navier-Stokes equations are solved numerically for the computation of turbulent flow around a Wigley double model. A second order finite difference method is applied for the spatial discretization on the nonstaggered grid system and 4-stage Runge-Kutta scheme for the numerical integration in time. In order to increase the time step, residual averaging scheme of Jameson is adopted. Pressure field is obtained by solving the pressure-Poisson equation with the appropriate Neumann boundary condition. For the turbulence closure, 0-equation turbulence model of Baldwin-Lomax is used. Numerical computation is carried out for the Reynolds number of 4.5 million. Comparisons of the computed results with the available experimental data show good agreements for the velocity and pressure distributions.