• Applied Chemistry for Engineering
• /
• v.26 no.6
• /
• pp.746-752
• /
• 2015

This study investigates the effects of aspect ratio (transport length-to-width) on diffusive-convection for physical vapor transport processes of $Hg_2Cl_2-NO$ system. For a system with the temperature difference of 20 K between an interface at the source material region and growing crystal interface, the linear temperature profiles at walls, the total molar fluxes at Ar = 2 are much greater than Ar = 5 as well as the corresponding nonuniformities in interfacial distributions due to the effect of convection. The maximum total molar flux at the gravitational acceleration of 1 $g_0$ is greater twice than at the level of 0.1 $g_0$, where g0 denotes the gravitational acceleration on earth. With increasing aspect ratio from 2 to 5, a diffusive-convection mode is transited into the diffusion mode, and then the strength of diffusion is predominant over the strength of diffusive-convection.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.426-426
• /
• 2012

본 연구에서는 GaAs p-i-n 접합 구조에 InAs 양자점을 삽입한 양자점 태양전지(Quantum Dot Solar Cell; QDSC)의 내부 전기장(internal electric field)을 조사하기 위하여 Photoreflectance (PR) 방법을 이용하였다. QDSC 구조는 GaAs p-i-n 구조의 공핍층 내에 8주기의 InAs 양자점 층을 삽입하였으며 각 양자점 층은 40 nm 두께의 i-GaAs로 분리하였다. InAs/GaAs QDSC는 분자선박막 성장장치(molecular beam epitaxy; MBE)를 이용하여 성장하였다. 이 때 양자점의 형성은 InAs 2.0 ML(monolayer)를 기판온도 $470^{\circ}C$에서 증착하였다. QDSC 구조에서 여기광원의 세기에 따른 전기장의 변화를 조사하였다. 아울러 양자점 층 사이의 i-GaAs 층 내에 6.0 nm의 AlGaAs 퍼텐셜 장벽(potential barrier)을 삽입하여 퍼텐셜 장벽 유무에 따른 전기장 변화를 조사하였다. PR 측정에서 여기광원으로는 633 nm의 He-Ne 레이저를 이용하였으며 여기광의 세기는 $2mW/cm^2$에서 $90mW/cm^2$까지 변화를 주어 여기광세기 의존성실험을 수행하였다. 여기광의 세기가 증가할수록 photovoltaic effect에 의한 내부 전기장의 변화를 관측할 수 있었다. PR 결과로부터 p-i-n 구조의 p-i 영역과 i-n 접합 계면의 junction field를 검출하였다. p-i-n의 i-영역에 양자점을 삽입한 경우 PR 신호에서 Franz-Keldysh oscillation (FKO)의 주파수가 p-i-n 구조와 비교하여 변조됨을 관측하였다. 이러한 FKO 주파수성분은 fast Fourier transform (FFT)을 이용하여 검출하였다. FKO의 주파수 성분들은 고전기장하에서 electron-heavyhole (e-hh)과 electron-lighthole (e-lh) 전이에 의해 나타나는 성분으로 확인되었다.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.14 no.1
• /
• pp.151-159
• /
• 2006

In these days, the importance of sludge treatment is emerging due to the London Convention, so this study was conducted to propose the alternatives for the improved sludge treatment on the organic wastewater and sewage sludge with JAR test and settling column equipped with stirrer. The minimum coagulant dosage to earn the optimum sludge settling efficiency resulted from 200mg/l and each critical sludge settling interface showed no distinct difference when PAC was dosed over 200mg/l. Accordingly, Clarification Rate(CR) with 200mg/l dosage was calculated to CR=(Ho-Ht) / Ho=1-0.4=0.6 because the critical sludge settling height stopped at 0.4. The settling velocity of sludge interface was decreased with the increase of MLSS concentration but rather increased with MLSS concentration over 1,000mg/l. This resulted from positive effect of interacted coagulation for floc formation by transfer to the zone of compressed settling when MLSS concentration increased over 1,000mg/l. The settling velocity of sludge interface showed $28.66{\times}10^{-3}/min$ for average settling velocity of sewage sludge which is 6.7 times higher than $4.25{\times}10^{-3}/min$ for average settling velocity of organic wastewater sludge. The increasing rate of CR for organic wastewater activated sludge was higher than that of settling velocity under 200mg/l of PAC dosage but settling velocity was higher than CR over 200mg/l of PAC dosage. However, in case of sewage sludge, the differential rate of CR was low when PAC dosage was increased but the settling velocity was suddenly increased with over 200mg/l dosage. Therefore coagulation effect was more efficient to MLSS settling velocity rather than SS removal effect in the supernatant.

• Applied Chemistry for Engineering
• /
• v.9 no.6
• /
• pp.870-877
• /
• 1998

With impedance spectrum measurements, impedance was studied in the interface between sample solutions for $K^+-ion$ selective PVC membrane electrode containing neutral carriers [dibenzo-18-crown-6 (D18Cr6) and valinomycine (Val)]. Response characteristics of electrode were examined by measuring AC impedance spectra that were resulted from the chemical structure and the content of carrier, variation of plasticizer, membrane thickness, doping of base electrolytes, and concentration variation of sample solution. Transport characteristics of PVC membrane electrode were also studied. It was found that the equivalent circuit for the membrane in $K^+$ solution could be expressed by a series combination of solution resistance and a parallel circuit consisting of the bulk resistance and geometric capacitance of the membrane system. But the charge transfer resistance and Warburg resistance were overlapped a little in the low concentration and low frequency ranges. The carrier, D18Cr6 was best for electrode and impedance characteristics, and ideal electrode characteristics were appeared especially in case of doping of the base electrolyte[potassium tetraphenylborate(TPB)]. The optimum carrier content was about 3.23 wt% in case of D18Cr6 and Val. DBP was best as a plasticizer. As membrane thickness decreased the impedance characteristics was improved, but electrode characteristics were lowered for membrane thickness below the optimum. In the case of D18Cr6, the selectivity coefficients by the mixed solution method for the $K^+$ ion were the order of $NH_4{^+}>Ca^{2+}>Mg^{2+}>Na^+$.