• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.14 no.4
• /
• pp.11-23
• /
• 2011

Mountain streams, which are major components of an entire river network, play an important role as the source of water, sediment, coarse and fine organic matter, and nutrients for lowland rivers. Therefore, dynamics and downstream linkages of each compartment of the mountain stream can be essential for watershed management in catchment scale. The dynamics and downstream linkages are understood as a development of step-pool sequences along a river course. Recently, stream restoration after flooding event often employ the development of step-pool sequences in the world. In this paper, we 1) examined the geomorphic characteristics and the role of step-pool sequences in steep mountain streams by reviewing the results of past studies, and 2) introduced the case studies of stream restoration using step-pool sequences, and finally 3) addressed design methods considering geometry and stability of artificial step-pool sequences for stream restoration. Step-pool sequences play an important role not only as roughness with energy dissipation but also as heterogeneity of stream feature for aquatic habitat. Step-pool sequences, even if they are constructed artificially along a stream, may be effective for small stream restoration considering eco-friendly torrent controls. So far the artificial step-pool sequences were employed for mountainous streams, but those would be applied to urban stream.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.23 no.3
• /
• pp.193-204
• /
• 2011

To develop more robust oil boom which is vulnerable to various failure mode under severe weather condition, highly accurate wave model is developed using Spatially filtered Navier-Stokes Eq., LDS (Lagrangian Dynamic Smagorinsky model) for residual stresses, SPH (Smoothed Particle Hydrodynamics). To clarify the hydraulic characteristics of floating type oil boom, we numerically simulate the behavior of oil spill around oil boom under very energetic progressive waves. At the first stage, we firmly anchored the oil boom, and then, allowed the excursion of the oil boom. It turns out that oil boom with skirt of enough length (longer than 30% of depth) effectively confines the oil spill even against very energetic waves. We can also observe obliquely descending vertical eddies between y = 1~2 m as horizontal vortices shedding at the interface of oil spill and water are diffused toward the bottom, which is believed to be the birth, growing and break-down of Kelvin-Helmholz wave.

• Journal of Korea Water Resources Association
• /
• v.39 no.4 s.165
• /
• pp.289-298
• /
• 2006

Turbidity had been measured during five months In Han River estuary at three sites. In this process, missing data occurred due to gauge imitation of the turbidity sensor. A filling method for the missing turbidity data was newly developed in this study. Under the assumption of the time series data with unique period and different amplitudes, the new method can fill the missing data based on the area ratio of each cycle. And the new method was verified through the data set having no missing data. There were little differences between gross area of the original data and that of the revised data by the new method though values of peak were underestimated. As a result, missing turbidity data observed at Han River estuary could be appropriately filled using the new filling method.

• Journal of Korea Port Economic Association
• /
• v.23 no.2
• /
• pp.63-86
• /
• 2007

Historically, government has facilitated logistics by building the airports, the seaports, the rail and transit lines, subsidized their operations where necessary, and established the basic laws and regulations pursuant to which the industry serves the public. In the late 1990s and early 2000s, Korean government began to prepare the basic laws of logistics and nowadays it has tried to refine national logistics laws to reflect contemporary industry conditions and evolving ideological attitudes. The policy objectives governing logistics regulation have changed significantly since 2000. This article traces the current status of the Korean logistics laws which regulate one of the nation's most important industries and suggests certain amendment of current laws.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.28 no.3
• /
• pp.30-39
• /
• 2015

Objectives This study aims to analyze Heart Rate Variability (HRV) in women after missed abortion compared with healthy women Methods We studied 35 women who visited Kang-Nam Kyung-Hee Korean Hospital after missed abortion from 01 January 2012 to 28 February 2015 (missed abortion group) and 35 normal women visiting medical examination center from 1 January 2014 to 31 December 2014 (Normal Group). We measured HRV of each women and investigated the difference of HRV between two groups. Results The standard deviation of NN intervals (SDNN) in Missed abortion group is lower than normal group. The square root of the mean square difference of successive NNs (RMSSD) in Missed abortion group is lower than normal group. However there was no significant difference. Total Power (TP) and Low frequency power (LF) is significantly lower in Missed abortion group compared with normal group. High frequency power (HF), Very low frequency power (VLF) and LF/HF ratio in missed abortion group is lower than normal group. but There was no significant difference. Conclusions Missed abortion group is lower in function of overall autonomic nervous system, especially sympathetic nerve.

• Journal of Korean Society on Water Environment
• /
• v.35 no.4
• /
• pp.308-315
• /
• 2019

The objective of this study was to investigate mountain stream water and air temperatures, area, latitude, altitude, and forest coverage in headwater catchments located in Kangwon-do, Mid-eastern Korea from 2015 to 2017. Daily mean value of mountain stream water temperature was approximately $6^{\circ}C$ lower than the daily mean value of air temperature on the monitoring sites during the observation period. Monthly mean value of mountain stream water temperature increased with increasing monthly mean value of air temperature from May to August during the observation period. Seasonal variations of mountain stream water temperature were dependent on air temperature rising and falling periods. Correlation analysis was conducted on mountain stream water temperature to investigate its relationship with air temperature, area, latitude, altitude, and forest coverage of air temperature rising and falling periods. The correlation analysis showed that there exists a relationship (Correlation coefficient: -0.581 ~ 0.825; p<0.05), particularly the air temperature showed highest correlation with mountain stream water temperature. Regression equations could be developed due to contribution of air temperature to affect mountain stream water temperature (Correlation coefficient: 0.742 and 0.825; p<0.01). Therefore, a method using various parameters based on air temperature rising and falling periods, could be recommended for predicting mountain stream water temperature.

• Journal of Ocean Engineering and Technology
• /
• v.32 no.6
• /
• pp.427-432
• /
• 2018

Tidal current power is one of the energy sources of the ocean. Electricity can be generated by converting the flow energy of the current into the rotational energy of a turbine. Unlike tidal barrage, tidal current power does not require dams, which have a severe environmental impact. A floating-type tidal current power device can reduce the expensive support and installation cost, which usually account for approximately 41% of the total cost. It can also be deployed in relatively deep water using tensioned wires. The dynamic behavior of a floater and turbine force are coupled because the thrust and moment of the turbine affect the floater excursion, and the motion of the floater can affect the incoming speed of the flow into the turbine. To maximize the power generation and stabilize the system, the coupled motion of the floater and turbine must be extensively analyzed. However, unlike pile-fixed devices, there have been few studies involving the motion analysis of a moored-type tidal current power device. In this study, the commercial program OrcaFlex 10.1a was used for a time domain motion analysis. In addition, in-house code was used for an iterative calculation to solve the coupled problems. As a result, it was found that the maximum mooring load of 200 kN and the floater excursion of 5.5 m were increased by the turbine effect. The load that occurred on the mooring system satisfied the safety factor of 1.67 suggested by API. The optimum mooring system for the floating tidal current power device was suggested to maximize the power generation and stability of the floater.

• The Korean Journal of Archival Studies
• /
• no.47
• /
• pp.197-225
• /
• 2016

Korean archival community had continuously dealt with attempts at weakening the core of records and archives principles in the name of deregulation. In 2015, Korean government announced revisions of the Archives Law in order to boost uses of commercial records facilities by public institutions. As key concepts were unclear and understandings among stake-holders varied, a considerable degree of chaos and anxiety aroused. The amendment itself was held at National Assembly. The unresolved disputes rested, however, waiting for another attempt of similar nature. As the recognition propelled this paper, it aimed at reviewing major contending arguments and proposing future actions.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.557-563
• /
• 2020

Digital Twin Technology is currently being utilized in many industries and logistics seems soon to follow that trend. Currently, technology introduction to container terminals is restrictedly developing. In reviewing the existing literature, it became clear that research on the application of Digital Twin technology for container terminals is deficient. This study fulfilled AHP and IPA analysis causing fields to adjust priority at the container terminal. The result of analysis on the urgent necessity of adjustable fields' detailed elements from Digital Twin Technology, ATC, intelligent CCTV, and container yards, and showed that they were of the highest priority level. Also, VR/AR Equipment, AYT, Smart Container, Automated Container Delivery Facility, Refrigerated/Freezer Container, Wearable Device for Port Maintenance, and Smart Buoy were reviewed in detail. Our group suggests AQC, Berth, AGV, ASC, Apron, and Automated Mooring as potentially useful Digital Twin Technologies. Finally, our research suggests the OSS equipment, intermodal linkage facility, intelligent drone, and hazardous material storage are areas of low priority.

• Journal of the Society of Naval Architects of Korea
• /
• v.59 no.3
• /
• pp.157-163
• /
• 2022

An automatic mooring system for a ship consists of a vacuum suction pad and a mechanical part, enabling quick and safe mooring of a ship. In the development of a mooring system, the design of a vacuum suction pad is a key to secure enough mooring forces and achieve stable operation of a mooring system. In the vacuum suction pad, properly designing its rubber seal determines the performance of the suction pad. Therefore, it is necessary to appropriately design the rubber seal for maintaining a high-vacuum condition inside the pad as well as achieving its mechanical robustness for long-time use. Finite element analysis for the design of the rubber seal requires the use of an appropriate strain energy function model to accurately simulate mechanical behavior of the rubber seal material. In this study, we conducted simple uniaxial tensile testing of Chloroprene Rubber (CR) to explore the strain energy function model best-fitted to its experimentally measured engineering strain-stress curves depending on various temperature environments. This study elucidates the temperature-dependent mechanical behaviors of CR and will be foundational to design rubber seal for an automatic mooring system under various temperature conditions.