• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.144-148
• /
• 2004

Generally a ship in a port or canal is guided by tugboat(s), while the ship engine(s) and steering mechanism idle. The shortcomings of this method are insufficient in course keeping ability, danger of collision with waterside structures, time-consuming preparation for tugging, as well as the need to maintain tugboats. A new technology for ship guiding, based on the physical principle of interaction of a solid body with aerated liquids has been developed [1]. Model tests were carried out for the verification of system at slow speed by engine operating conditions and with an idle steering. The developed device has been proved to keep the ship on course safely.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.16 no.2
• /
• pp.58-67
• /
• 2020

This study presents cyclic stress-strain and tensile test results at room temperature (RT) and 316℃ using cold-worked TP304 stainless steel base and weld metals. By comparing the cyclic hardening/softening behavior and failure cycle of cold-worked materials with those of irradiated austenitic stainless steels, the feasibility of simulating the irradiation effect on cyclic deformation and failure behaviors of TP304 stainless steel base and weld metals was investigated. It was found that, in the absence of strain-induced martensite trasformation, cold-working could properly simulate the change in cyclic hardening/softening behavior of TP304 stainless steel base and weld metals due to neutron irradiation. It was also recognized that cold-working could adequately simulate the reduction in failure cycles of TP304 stainless steel base and weld metals due to neutron irradition in the low-cycle fatigue region.

• Journal of the Korean Geotechnical Society
• /
• v.31 no.3
• /
• pp.27-38
• /
• 2015

Triaxial tests on sand-silt mixture specimens under low and high confining pressures were performed to understand their shear behaviors. The fines content in the mixture is lower than the threshold value. A series of tests under different conditions including fines contents (0%, 9.8%, 14.7%, 19.6%), density of specimen (controlled by different compaction energies of $E_c=22kJ/m^3$, $E_c=504kJ/m^3$), confining pressure (100 kPa, 1 MPa, 3 MPa, 5 MPa) were performed to investigate influences of these factors. Based on the test results, the threshold fines content, where the dominant structure of mixture changes from sand-matrix to fines-matrix, decreases with the increase of confining pressure. Under very high confining pressures, as a result of sand particle crushing, the behavior of the dense specimen is similar to that of the loose specimen which shows hardening, compression behavior, and shear strength increases with increase of fines content. In conclusion, silt is granular material like sand, and its influence on shear behavior of sand-silt mixture is very different from that of plastic fines on sand-fines mixture.

• Resources Recycling
• /
• v.4 no.1
• /
• pp.4-11
• /
• 1995

The amounts of waste stone and stone powder sludge that occurred in the quarry and processing plant of s stone plates, have been increased with the development of stone industry. The manufactunng process of 따tificial s stone was studied to reduce the outlet of these wastes and utilIze them as raw materials for architecture, interior decoration and art work. In order to compare the properties of artiflcial stone with those of natural building-stone, the physi$\alpha$II properties of artificial stone such as specific gravity, absorption ratio, elastic wave velocity, compressive s strength, tensile strength, shore hardness, elasticity and Poission's ratio were measured. From the mesaured d data of physical properties, it was found that physical propertIes of artificial stone were controlled by homogeneous m mixing ratio of constituents, molding pressure, and amount of binder. Also, from the thermo-gravimetric analysis, it was found that artIfIcial stone manufactured had a good thermal stability up to $300^{\circ}C$. It was concluded that t the optimum conditions for manufacturing process of artificial stone were $200kg/\textrm{cm}^2$ of molding pressure, 12-15 w weight % of binder amounts.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.5
• /
• pp.543-547
• /
• 2015

The cooling process referred to as Tempcore has been applied to produce a high-strength rebar. Excellent rebar with strength and weldability can be manufactured from mild steel without the addition of alloying elements by using the Tempcore process. However, there are limitations to evaluating the effect of various chemical compositions and cooling conditions within a site facility. In this study, we developed an apparatus to simulate the Tempcore process and obtained microstructures with a hardened surface layer, an intermediate region and a soft inner core. The experimental apparatus has been equipped with a cooler set that is the same as the site facility and consists of a pump line that supplies pressure of 12-13 bar and flow rate of up to $50m^3/h$. In accordance with the simulation result of steel grade SD400 that requires more than 400 MPa of yield strength, both the hardened area ratio and the hardness with respect to each cooling depth were found to agree well with the product.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1993.04b
• /
• pp.23-27
• /
• 1993

스테인리스강은 내식성, 내열성, 내산화성이 좋으므로 화학산업, 의학용기, 고정밀 산업 등에서 많이 사용되고 있다. 스테인리스강은 열전도율이 낮고 용융물의 점성이 크고 가공경화가 심하기 때문에 인코넬 티탄합금 등과 함께 난삭재로 알려져 있다. 스테인리스강의 고합금강을 사용한 기계가공은 공구의 마모가 심하게 일어나므로 가 공이 어렵다. 화염절단(Flame dutting)도 합금물의 버닝(burning)현상을 막는 성질 때문에 잘쓰이지 않고 플라 즈마-아크(plasma-arc) 절단은 수중에서 이루어질 경우 절단끝이 산화되지 않는 좋은 절단면을 얻을 수 있으나 수중에서 사용해야 하는 어려움이 있다. 레이저를 이용한 가공은 절단폭이 작아 재료의 손실이 적으며 복잡한 형상의 절단도쉽고 공구의손실이 없는등 많은 장점이 있어서 사용이 증가하고 있다. 본 연구에서는 스테인리스 강의 절단메커니즘에대한 이해를 돕기 위해 절단가공에 큰 영향을 끼치는 레이저 출력, 절단속도, 절단가스의 압력, 재질, 절단두께를 절단변수로채택하여 절단을 수행하였다. 절단결과를 비교 검토하여 절단변수가 절단에 미치는 영향을 분석하였고 최적의 절단을 얻는 가공조건을 제시하였다.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.5
• /
• pp.444-450
• /
• 2008

The conventional studies of the aging effect on cardio-vascular system are mostly obtained from human experiences and can only provide local information. In this study, the effect of fatigue fracture of arterial wall on the blood pressure was investigated by hemodynamic analysis. The aging process was simulated with three stages. The pulse wave velocity increased with age. The systolic blood pressure increases consistently but diastolic blood pressure decreases with age. The simulated results show in good accordance with the clinical ones.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.126-126
• /
• 2004

1996년 Chou 등이 개발한 가열방식의 나노임프린트 리소그래피(nanoimprint lithography, NIL)은 선폭 100nm 이하의 나노구조물을 경제적으로 제작할 수 있는 대표적인 나노패턴닝(nano-patterning) 공정으로 많은 기대가 모아지고 있으나, 열변형에 의해 다층정렬이 어렵다는 점과, 점도가 큰 레지스트(resist)를 임프린트하기 위해서는 고압(∼30 bar)이 필요하다 점 등의 문제점이 있다. 이를 해결할 수 있는 방법으로 UV 나노임프린트 리소그래피(ultraviolet nanoimprint lithography, UV-NIL)를 들 수 있다.(중략)

• Journal of Ocean Engineering and Technology
• /
• v.14 no.1
• /
• pp.44-51
• /
• 2000

Safety and integrity are required for reactor pressure vessels because they are operated in high temperature. There are single specimen method multiple specimen method and load ratio analysis method which used as evaluation of safety and integrity for reactor pressure vessels. In this study the fracture resistance curve(J-R curve) elastic-plastic fracture toughness($J_{IC}$) and material tearing modulus ($T_{mat}$) of SA 508 class 3 alloy steel used as reactor pressure vessel steel are measured and evaluated at room temperature 20$0^{\circ}C$ and 30$0^{\circ}C$ according to unloading compliance method and load ration analysis method. And then the comparison with experimental $J_{IC}$ and theoretical$J_{IC}$ by local fracture strain is managed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.5
• /
• pp.1166-1172
• /
• 2007

Drainage pipeline system repaired by trenchless technology using liners can be defined between partial and entire collapse. The liners in the partial collapse pipeline are subjected to only uniform groundwater pressure on the surface. This research evaluates practical and useful cured-in-placed pipe (CIPP) design equations based on experimental results and finite element analysis results. Also, stability evaluation of pipe liner system with edge treatment is performed using finite element analysis. The CIPP equation should be used to design liner pipe system.