• Journal of The Korean Radiological Technologist Association
• /
• v.29 no.1
• /
• pp.135-135
• /
• 2003

• Proceedings of KHEA Conference
• /
• 2005.10a
• /
• pp.128-128
• /
• 2005

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.2
• /
• pp.73-85
• /
• 1983

We occasionally find a thin layer of imperfectly hardened concrete surface when the wood form is stripped off. It has been generally believed that the principal causes were the effects of reactive form oil, adhesive agent or formalin which has been used in the course of plywood manufacturing. However, in this experiment, it became clear that the concrete surface could be influenced more harmfully by a certain species of wood form and the storage conditions of wood form rather than any other causes. Especially, the main cause of the severely dusty layer is the use of wood form exposed to sun for a long period. Countermeasures, therefore, for preventing concrete surface from dusting are also discussed in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.8 no.4
• /
• pp.821-825
• /
• 2007

In this study, the single hardening model with stress history-dependent plastic potential, which has been most recently proposed based on the critical state soil mechanics and needs few model parameters, was verified for the normally, lightly, and heavily over-consolidated clayey specimens. The triaxial compression tests were strictly conducted. The predictions using the single hardening model generally agree with the measurement. The discrepancy exists on its main focusing on the principal stress rotation; however, the plastic work H and the principal stress rotation angle ${\beta}$ are found to be effective indicators of loading history for the plastic potential function of the stress path dependent materials.

• Journal of Life Science
• /
• v.9 no.2
• /
• pp.231-240
• /
• 1999

Regular exercise is effective in preventing coronary disease such as angina pectoris and infarction, inside it can lower the blood pressure and aids in weight control and release of stress. Risk factors of arteriosclerosis is hypertension, hyperlipidemia, diabetes, obesity, physical inactivity and excessive smoking. Arteriosclerosis begins at young age worsens with age, particulary in male. For people with risk factors of arteriosclerosis, it is important to prevent arteriosclerosis-related disease with dietary, living pattern and exercise prescription. Dietary fibers promote exercise of the digestive tract and shortens the time food remains inside the digestive tract. It can prevent obesity, hyperlipidemia, arteriosclerosis and colin cancer by blocking the absorption of cholesterol. Various vegetables and sea foods are lichen unsaturated fats and prevent the absorption of cholesterol inside the digestive tract. Essential fatty acids and unsaturated fats which are contained in vegetable oils, promotes metabolism while preventing absorption. In fruits, pectin water-soluble fiber, is present and lowers the level of cholesterol. By consuming foods that low in cholesterol and saturated fats, and rich in unsaturated fats, aliomentotherapy alone can reduce the plasma cholesterol by 10~l5$\%$. For ideal exercise, it should be aerobic with intensity of 60~80$\%$ HRmax, duration of 15~60min/day. The frequancy of 3~6/week is desirable the better exercise prescription is endurance aerobic exercise. To get more effect exercise, exercise consistency is very important.

• Proceedings of the KWS Conference
• /
• 2010.05a
• /
• pp.95-95
• /
• 2010

자동차 산업에서 차체를 성형하는 프레스 금형 산업은 꾸준히 증가하고 있는 자동차 생산대수와 함께 성장해가고 있으며, 자동차 산업의 국제 경쟁이 심해지고 소비자들의 요구가 다양해짐에 따라 신제품 개발주기에 발맞추어 금형의 제작에도 단납기 및 비용절감을 위한 노력과 제품의 품질 향상을 위해 신기술, 신공법이 적용되고 있다. 한편 자동차 차체를 제작하는 프레스 금형가공은 박판소재를 원하는 형상으로 제작하는 공정으로써, 프레스의 상 하 운동을 이용하여 강판을 성형한다. 이러한 금형의 형태는 곧 자동차 차체 제품의 형태를 완성하므로 제품을 성형하는 도중에 금형과 소재의 마찰에 의해 금형의 마모나 마멸이 발생하여 제품의 품질을 저하시킬 우려가 있다. 따라서 금형의 내마모성 및 수명을 향상시키기 위한 방안들 중 표면경화처리가 행해지고 있으며, 그중 공정 속도가 빠르고 국부적인 열처리가 가능한 레이저 표면처리 방법이 많은 관심을 받고 있다. 본 연구에서는 이러한 금형의 성질을 향상시키기 위해 고출력 다이오드 레이저를 이용하여 프레스 금형공정 중 드로잉(drawing) 공정에의 적용을 위한 표면경화처리를 실시하였다. 최대출력 4.0kW의 다이오드 레이저를 사용하였으며, 6축 외팔보 로봇에 열처리용 광학계를 장착하여 열처리를 실시하였다. 또한 광학계 부근에는 적외선 온도센서가 부착되어있어 열처리시 시험편의 표면온도를 실시간으로 측정할 수 있도록 구성되어져있다. 시험편은 금형재료용 구상흑연 주철인 FCD550 소재를 사용하였으며, 공정변수에 따른 열처리 특성을 파악하고, 그 경화특성을 평가하였다. 실험 결과, FCD550 소재의 표면 열처리시 레이저 출력 3.5kW, 빔 이송속도 3mm/sec에서 최적의 열처리 특성을 나타내었으며, 이때의 최고 경도는 930Hv을 나타내며 모재에 비해 경도가 3배 정도 상승하는 우수한 경화특성을 보였다.

• Journal of the Korean Geotechnical Society
• /
• v.15 no.6
• /
• pp.121-130
• /
• 1999

The objective of this study is to perform finite element analyses(FEA) using the anisotropic hardening constitutive model on the basis of the total stress concept. An anisotropic hardening model was then developed to solve the problem and its mathematical formulations and experimental verifications were also described. In a companion paper, the constitutive equation will be formulated for accurate and efficient solutions of FEA, and coded into a nonlinear analysis program, and finally a field problem will be analyzed. The proposed model includes the failure criterion of a von Mises type and the anisotropic hardening rule based on the generalized isotropic hardening description, which can model the nonlinearity and the anisotropy of the stress-strain relationship. As a result this study could verty the experimental results for UU triaxial tests, CU triaxial tests for overconsolidated samples, and anisotropic loading tests with the rotation of principal stress axes for $K_0$consolidated samples.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.35 no.12
• /
• pp.1663-1668
• /
• 2011

Surface hardening treatment is required to improve the wear-resistance of press die because severe abrasion of die occurs during the drawing process in which the forming of the automotive body is completed and during the trimming process in which the unnecessary parts are cut. In this study, experiments on the laser surface treatment of press die are performed. Specimens are heat-treated separately at certain plate and edge position by using a diode laser to carry out suitable surface hardening treatment to reduce the wear during the drawing and the trimming processes, and the proper conditions for heat treatment are found. Spheroidal and flake graphite cast iron specimens are used, and the heat treatment characteristics of the two materials are compared. From the results of the study, it is confirmed that the heat treatment characteristics differed depending on the materials.

• Applied Chemistry for Engineering
• /
• v.1 no.2
• /
• pp.124-132
• /
• 1990

In order to improve the mechanical properties and fracture toughness of HPT 1071/DDS system, poly(aryl etherimide) (PEI) was incorporated in the resin system. In HPT 1071/DDS system, mechanical properties of cured epoxy resins were not strongly dependent on the concentration of DDS curing agent strongly. In the case of HPT 1071/DDS/PEI system, the fracture toughness and flexural properties of epoxy resins increased with increasing the concentration of PEI. SEM micrographs of cured epoxy resin indicated that the phase separation occured at the low concentration of PEI in this system. In addition, investigation of the relationship between mechanical properties and the morphology of modified epoxy resin was undertaken in HPT 1071/DDS/PEI system.

• Proceedings of the KOR-BRONCHOESO Conference
• /
• 1993.05a
• /
• pp.108-108
• /
• 1993

Cystic hygroma is a congenital anomaly of the lymphatic system for which the exact pathogenetic mechanism remains to be elucidated. It is filled with lymphatic fluid and commonly present in the cervical area in either single isolated or multiple form. It is usually innocuous without any pain but may be life-threatening when it is large enough to compromise the airway or interfere with swallowing. Since spontaneous regressions rarely occur, it requires surgical removal. However, this may be rendered difficult in multiple forms and in those with extensive infiltration into the surrounding tissue. This is a presentation of 10 pediatric patients with cystic hygroma who have been successfully treated by sclerotherapy using bleomycin at the authors' department.