• Journal of the Korean Geotechnical Society
• /
• v.15 no.4
• /
• pp.113-132
• /
• 1999

Recently in Korea, application of the soil nailing is gradually extended to the sites of excavations and slopes having various ground conditions and field characteristics. Design of the soil nailing is generally carried out in two steps, The First step is to examine the minimum safety factor against a sliding of the reinforced nailed-soil mass based on the limit equilibrium approach, and the second step is to check the maximum displacement expected to occur at facing using the numerical analysis technique. However, design parameters related to the soil nailing system are so various that a reliable design method considering interrelationships between these design parameters is continuously necessary. Additionally, taking into account the anisotropic characteristics of in-situ grounds, disturbances in collecting the soil samples and errors in measurements, a systematic analysis of the field measurement data as well as a rational technique of the optimum design is required to improve with respect to economical efficiency. As a part of these purposes, in the present study, a procedure for the optimum design of a soil nailing excavation wall system is proposed. Focusing on a minimization of the expenses in construction, the optimum design procedure is formulated based on the genetic algorithm. Neural network theory is further adopted in predicting the maximum horizontal displacement at a shotcrete facing. Using the proposed procedure, various effects of relevant design parameters are also analyzed. Finally, an optimized design section is compared with the existing design section at the excavation site being constructed, in order to verify a validity of the proposed procedure.

• Journal of Legislation Research
• /
• no.44
• /
• pp.241-281
• /
• 2013

First and foremost, a discussion concerning government structure has to be done in connection with the state form and the governmental form. For practical reasons, there is a need to balance the principle of legality and its exceptions under the Government Organization Act. To ensure the flexibility of government structure with respect to the principle of legality, the National Assembly should accept the government structure requested by the newly elected government. This mitigates the rigidity of the principle of the legality within the government organizations. However, excessive changes by each government could violate the principle of legality asked by Constitution. In this sense, arbitrary modification with respect to the government structure by the newly elected government is not desirable. The long term stability of the government organization is required in any case. Secondly, general administrative agencies, other than Executive Ministries, should not be established under the direct order of the President without the control of the Prime Minister. A hierarchy of the executive branch (President->Prime Minister-> Executive Ministries) is stipulated in the Constitution. Establishing a hierarchy of President -> executive institution should be considered unconstitutional. Therefore, only the Presidential Secretariat and institutions with special functions can be established in the Presidential Office. Establishing general administrative agencies in the Presidential Office for convenience purposes is against the spirit of the current Constitution. Consequently, only the office of staffs and special agencies can be placed in the presidential office. It is against the spirit of the current Constitution to found administrative agencies under the presidential office for convenience. Thirdly, the office of the Prime Minister should be the backbone of internal affairs. In that sense, the President, as the head of state, should focus on the big picture such as the direction of the State, while the Cabinet headed by the Prime Minister should be responsible for the daily affairs of the State. The cabinet surrounding the Prime Minister must control all the ordinary affairs of the State, while the President, as the head of the State, should focus on the big picture of blueprinting the aim of the State. Lastly, the Office of the Prime Minister and Executive Ministries are the two main bodies of the executive branch. It is important to reduce the confusion caused by repeated changes in the names of Executive Ministries, to restore the traditional names and authorities of these institutions, and to rehabilitate the legitimacy of the State. For the Korean democracy to take its roots, a systematic way of stabilizing a law-governed democratic country is needed. There is also the need not only to reform security and economic agencies, but also to rationally solve the integration of technique and policy, according to the changes of time.

• Korea Science and Art Forum
• /
• v.29
• /
• pp.305-318
• /
• 2017

The need for recognizing the crime in the urban spaces as a social problem and finding out specific approaches such as the study of space design and various guidelines for crime prevention is increasing. In this regard, "Crime Prevention Through Environmental Design" (marked as "CPTED") is actively underway. Yeomri-dong Salt Way is the first place to which the Seoul Crime Prevention Design Project was appled. The business objective of improving the local environment has been implemented rationally through cooperation and voluntary participation between subject of the project executives and community members. Since its efficiency has been proven, the sites have been expanded since then and becomes a benchmarking example of each local government.This kind of problem solving effort has the same context in purpose and direction of the 'Village Art Project' which has been implemented since 2009 with the aim of promoting the culture of the underdeveloped area and encouraging the participation of the residents by introducing the public art. It is noteworthy that this trend is centered around the characteristics of community functions and values. The purpose of this study is to propose the application method of community furniture as a way to increase the efficiency of CPTED to improve the 'quality of life' of residents. To do this, we reviewed CPTED, community design, public art literature and prior research, and identified the problems and implications based on the site visit Yeomri-dong of Seoul and Gamcheon Village of Pusan which is the successful model of "Seoul Root out Crime by Design" and 'Maeulmisul Art Project' respectively. The common elements of the two case places identified in this study are as follows: First, the 'lives' of community residents found its place in the center through the activation of community by collaborative activities in addition to the physical composition of the environment. Second, community design and introduction of public art created a new space, and thereby many people came to visit the village and revitalize the local economy. Third, it strengthened the natural monitoring, the territoriality and control, and the activity increase among the CPTED factors. The psychological aspect of CPTED and the emotional function of public art are fused with the 'community furniture', thereby avoiding a vague or tremendous approach to the public space through a specific local context based on the way of thinking and emotion of local people and it will be possible to create an environment beneficial for all. In this way, the possibility and implication of the fusion of CPTED and public art are expected to be able to reduce the social cost through the construction of the crime prevention infrastructure such as expansion of the CPTED application space, and to suggest a plan to implement the visual amenity as a design strategy to regenerate city.

• Korean Journal of Construction Engineering and Management
• /
• v.12 no.5
• /
• pp.146-154
• /
• 2011

Korean contractors have been maintained sustainable growth since entering into overseas construction market for the first time in 1960' s. In 2010, Korean contractors ordered 761 billion (USD) from overseas markets. Especially, billion (USD) were earned by Korean contractors in overseas plant construction market which account for more than 80% of the total amount by Korean contractors. Nevertheless, many Korean contractors are suffering from lack of technological competitiveness and construction management skills in the design phase compared with global leading contractors. These conditions have directly effect on the success of projects in terms of cost, duration, and quality. So, this study focused on identifying the risk factors and developing risk priority method for the design phase of LNG plant projects whose market is expanding. Research procedures were conducted by the following three steps. First, total 57 risk factors were identified in design phase through extensive literature reviews and experts survey. Second, the authors developed risk priority method which are more suitable for design phase of LNG plant projects by using three criteria, Probability(P), Impact(I), and Coordination Index(CI). Finally, the suitability of risk priority method and practical applicability were verified through expert survey and interview. Consequently, if korean contractors use the suggested risk factors and priority method based on their own know-how and experiences, then more reasonable and rational risk management will be conducted in the design phase of LNG plant projects.

• The Korean Journal of Air & Space Law and Policy
• /
• v.34 no.1
• /
• pp.3-38
• /
• 2019

In 1984, Congress enacted a new measure of administrative sanctions which is a civil money penalty program for violations of Aviation Act and its implementing regulations. This civil money penalty system has been in operations in lieu of suspending or revoking certificates issued by Korean government, Ministry of Land, Infrastructure, and Transport. According to the rules of Aviation Business Act or Aviation Safety Act, where the Minister of Land, Infrastructure and Transport should order an air carrier to suspend operation because of her violation under certain rules, in which case the suspension of operation is likely to cause serious inconvenience to consumers of air transport services or to harm public interest, the Minister of the department may impose an administrative monetary penalty in lieu of the suspension of operation. In this regard, airline related civil money penalties are somewhat different from those of fair trade, which is the origin of the money penalties system in Korea. Civil money penalties in the field of fair trade are imposed on executive duty violations that undermine the value of the market economy order, and focus on reimbursement of profits due to violations and compensation for unfair spending by consumers. However, in the aviation sector, breach of duty by a business operator does not simply cause the property loss of the public, but it has a direct impact on life or property of the public. In this respect, aviation penalties are more likely to be administrative sanctions or punitive measures than refunds of unfair benefits, compared to penalties in the field of fair trade. In general, civil money penalties have been highly preferred as administrative sanctions because they are subject to investigations by administrative experts and thus, efficiency can be ensured and execution is quicker than judicial procedures. Moreover, in Korea, because punitive civil damages cannot awarded by the courts, the imposition of civil money penalties is recognized as a means of realizing social justice by recognizing the legal feelings of the people. However, civil money penalties are administrative sanctions, and in terms of effectiveness, they are similar to criminal fines, which are a form of punishment. Inadequate legislation and operation of penalties imposition may cause damage to the value of Constitution. Under the above recognition, this paper has been described for the purpose of identifying the present status of the civil money penalties imposition system and operating status in the area of air transport under the laws and regulations in Korea. Especially, this paper was focused on exploring the problem and improvement direction of Korean system through the comparative study with foreign laws and regulations.

• Journal of the Korean Data and Information Science Society
• /
• v.26 no.5
• /
• pp.1071-1085
• /
• 2015

The researchers attempted to develop a way to extract a near real-time online nation image using social media. Referring to previous studies about nation images and the categories defined in Wikipedia, an ontology considering the characteristics of nation image was constructed. Separately, data sets from various social media were compared and the click view of Wikipedia English-edition was selected. The ontology was applied to the recent six years of the data extracted of the three big exporting countries of the east Asia, China, Japan, and Korea. To compare the nation images, correspondence analysis was employed to show images in the area of politics, society, culture, and economy. The nation images extracted are indeed the reasonable representation of them. The researchers verified them to a few known government policies and confirmed that it could be used to help government officers to make foreign policies to boost nation's export and to employ as a key performance index for them.

• Korean Journal of Heritage: History & Science
• /
• v.41 no.2
• /
• pp.43-59
• /
• 2008

Sap(?, a funeral fan) is a funeral ceremonial object used in association with a Confucian ceremonial custom, which was crafted by making a wooden frame, attaching a white cloth or a thick paper onto it, drawing pictures on it, and making a holder for a handle. According to Liji(Records of Rites), Sap was used since the Zhou Dynasty, and these Chinese Sap examples are no big different than the Korean Sap examples, which were described in Joseon Wangjo Sillok(Annals of the Joseon Dynasty), Gukjo Oryeui(the Five Rites of the State), and Sarye Pyeollam(Handbook on Four Rituals). This study explored Sap excavated in lime-filled tombs and lime-layered tombs of aristocrats dating back to Joseon, as well as their historical records to examine Sap's characteristics according to their examples, manufacturing methods, and use time. The number and designs of Sap varied according to the deceased' social status aristocrats used mainly one pair of 亞-shaped Bulsap, and a pair of Hwasap with a cloud design depicted on it. A Sap was wrapped twice with Chojuji paper or Jeojuji paper, and for the third time with Yeonchangji paper. Then, it was covered with a white ramie, a hemp, a cotton, a silk satin, etc. Bobul(an axe shape and 亞-shape design) was drawn on both sides of Sap, and a rising current of cloud was drawn at the peripheral area mainly with red or scarlet pigments. Sap, which were excavated from aristocrats'lime-filled and lime-layered tombs, are the type of Sap which were separated from its handle. These excavated Sap are those whose long handles were burnt during the death carriage procession, leaving Sap, which later were erected on both sides of the coffin. The manufacturing process of excavated relics can be inferred by examining them. The excavated relics are classified into those with three points and those with two points according to the number of point. Of the three-point type(Type I), there is the kind of relic that was woven into something like a basket by using a whole wood plate or cutting bamboo into flat shapes. The three-point Sap was concentrated comparatively in the early half of Joseon, and was manufactured with various methods compared with its rather unified overall shape. In the meantime, the two-point Sap was manufactured with a relatively formatted method; its body was manufactured in the form of a rectangle or a reverse trapezoid, and then its upper parts with two points hanging from them were connected, and the top surface was made into a curve(Type II) or a straight line(Type III) differentiating it from the three-point type. This manufacturing method, compared with that of the three-point type, is simple, but is not greatly different from the three-point type manufacturing method. In particular, the method of crafting the top surface into a straight line has been used until today. Of the examined 30 Sap examples, those whose production years were made known from the buried persons'death years inscribed on the tomb stones, were reexamined, indicating that type I was concentrated in the first half of the $16^{th}$ century. Type II spanned from the second half of the $16^{th}$ century to the second half of the $17^{th}$ century, and type III spanned from the first half of the $17^{th}$ century to the first half of the $18^{th}$ century. The shape of Sap is deemed to have changed from type I to type II and again from type II to type III In the $17^{th}$ century, which was a time of change, types II and III coexisted. Of the three types of Sap, types II and III re similar because they have two points; thus a noteworthy transit time is thought to have been the middle of the $16^{th}$ century. Type I compared with types II and III is thought to have required more efforts and skills in the production process, and as time passed, the shape and manufacturing methods of Sap are presumed to have been further simplified according to the principle of economy. The simplification of funeral ceremonies is presumed to have been furthered after Imjinwaeran(Japanese invasion of Joseon, 1592~1598), given that as shown in the Annals of King Seonjo, state funerals were suspended several times. In the case of Sap, simplification began from the second half of the $16^{th}$ century, and even in the $18^{th}$ century, rather than separately crafting Sap, Sap was directly drawn on the coffin cover and the coffin. However, in this simplification of form, regulations on the use of Sap specified in Liji were observed, and thus the ceremony was rationally simplified.