• Journal of dental hygiene science
• /
• v.15 no.6
• /
• pp.768-774
• /
• 2015

The purpose of this study was to grasp the benefits from pit and fissure sealants and to analyze the factors of influencing the benefit amount by using the raw data of the Korea National Health and Nutrition Examination Survey for 2007~2013 targeting the subjects aged from 6 years in full to 18 years. The analysis was used STATA 11.0. As a result of the analysis, the following conclusions were obtained. It rose up to 1.24 pieces after carrying out the national health insurance coverage from averagely 0.93 piece until the year in 2007~2009 (up to November) when is before enforcing the national health insurance coverage in the pit and fissure sealants. The benefits from pit and fissure sealants depending on general characteristics were surveyed to be higher in the higher income level, in the more subscription to health insurance and private insurance, and in the more toothbrushing frequency per day. The factors that have influence upon the benefits from pit and fissure sealants were shown to include whether or not to have the national health insurance coverage in the pit and fissure sealants, income level, health insurance type and private insurance subscription appearance, and one-day toothbrushing frequency. Synthesizing the results, a rise in the benefits from pit and fissure sealants is shown in 2010 based on December 2009 when the national health insurance coverage in the pit and fissure sealants was implemented, but is showing the tendency of declining again from 2011. To increase the benefits from pit and fissure sealants, it is thought that the schemes will need to be discussed such as reinforcing publicity on the national health insurance coverage in the pit and fissure sealants, expanding a support for low-income bracket, and differentiating the outpatient cost sharing according to socio-economic level.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.38 no.5
• /
• pp.741-749
• /
• 2018

The purpose of this study is to propose a rational and scientific damage calculation model in relation to damages caused by bid rigging in construction projects. Previous studies and precedents in relation to calculating damages from bid rigging suggest that the main issue was the lack of consideration in standards for deciding successful bids, selection of inadequate standard comparative markets, insufficiency in analyzing the appropriateness of competitive bid price influence factors, and absence of calculation model verification. In order to improve on these issues, a damage calculation method on alternative tenders for construction projects was proposed. For this calculation model, first, a standard market adequate to the successful bid selection standards was determined, second, an appropriate factor was selected by analyzing the correlation between competitive bid price influence factors, and third, a regression analysis was conducted on the selected factor. Lastly, this was demonstrated through verification of appropriateness, significance & normality of the proposed model and application of actual bid rigging cases. Through the proposed calculation model, this study seeks to serve as a base to prevent opportunity damages for parties involved in related court cases by early resolution of disputes and relief from issues of unfair damage burdens on a particular party.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.4
• /
• pp.599-607
• /
• 2017

Since 2015, small and medium domestic enterprises that treat more than a certain quantity of chemical substances in accordance with the Chemical Substance Control Act are obliged to submit an off-site impact assessment and risk management plan. In order to reduce the administrative and economic burden of the risk assessment, its impact was determined. Toxic leaks of nitric acid, methanol, and acetic acid were estimated and the correlations (between them?) were calculated. In addition, the correlations of this study were used to compare the KORA results according to the accident scenarios of the actual workplace and the extent of the damage as a function of distance in the case of toxic leaks. In this study, the correlation formula of the materials can be used to quickly determine the damage distance in the event of the accidental leakage of materials in the road or workplace, and to prepare emergency plans and respond to emergencies more quickly.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.5
• /
• pp.263-270
• /
• 2021

In this study, a reliability-based design optimization of a 130-m class fixed-type offshore platform, to be installed in the North Sea, was carried out, while considering environmental, material, and manufacturing uncertainties to enhance its structural safety and economic aspects. For the reliability analysis, and reliability-based design optimization of the structural integrity, unity check values (defined as the ratio between working and allowable stress, for axial, bending, and shear stresses), of the members of the offshore platform were considered as constraints. Weight of the supporting jacket structure was minimized to reduce the manufacturing cost of the offshore platform. Statistical characteristics of uncertainties were defined based on observed and measured data references. Reliability analysis and reliability-based design optimization of a jacket-type offshore structure were computationally burdensome due to the large number of members; therefore, we suggested a method for variable screening, based on the importance of their output responses, to reduce the dimension of the problem. Furthermore, a deterministic design optimization was carried out prior to the reliability-based design optimization, to improve overall computational efficiency. Finally, the optimal design obtained was compared with the conventional rule-based offshore platform design in terms of safety and cost.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.277-280
• /
• 2016

Currently, systems for finding missing children are composed of using communication between a QR code and RFID chip, as the use of a smartphone. However, the current systems for finding missing children have limitations in that children can only be found if there are people in the surrounding area; there is an economic burden on parents required to purchase a smartphone for their children; along with difficulties in finding the missing children without the assistance of those in the surrounding area in critical situations such as a kidnapping, due to the limited duration of the battery life. In order to solve such problems, approaches need to be made from two perspectives: having someone in the surrounding area; and absence of anyone in the surrounding area. This thesis is centered on the development of a IoT (Internet of Things) system for finding missing children that combines two methods, namely, the method of finding missing children without a guardian in the surrounding area -within the limited space in which AP is installed by using a beacon and open source hardware being highlighted as the IoT technology - and the method of finding missing children with the smartphone application in which each individual becomes the Access Point (AP). The Main purpose is to provide accurate information of missing children's location for the 2situations and it is found that the accuracy of smartphones APP is 97.7% and security device AP is 91.1%.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.131-137
• /
• 2021

This study estimated acreage response functions for greenhouse paprika, greenhouse strawberry, open-land garlic, and open-land spinach by using Gyeongsangnamdo agricultural income data. The results show that the cultivation area for greenhouse paprika increased because the agricultural management costs decreased, and the risk of price volatility was relatively low. On the other hand, the cultivation area for greenhouse strawberries decreased due to increasing agricultural management costs and the greater risk of price volatility. In the case of open-land garlic and spinach, the cultivation area remained stagnant due to the greater risk of price volatility, despite increasing agricultural revenue. We derived several policy implications from our results. The risk of price volatility in agricultural products is greater for crops grown on land rather than crops grown in greenhouses. Therefore, the local government needs to adopt the "agricultural revenue guarantee insurance" in preference to crops grown on land rather than crops grown in greenhouses. On the other hand, in the case of greenhouse crops, agricultural management costs are very high. Thus, local government should focus on replacing old facilities and supplying smart-farm facilities that reduce agricultural management costs such as heating costs.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.5
• /
• pp.29-35
• /
• 2022

This paper proposes a fuel cell education framework installed on a Metaverse environment, which is to reduce the burden of education costs and improve the effect of education or learning. This Meta-Fuel cell platform utilizes the Unity 3D Web and enables not only theoretical education but also hands-on training. The platform was designed and developed to accommodate a variety of unit education contents, such as ppt documents, videos, etc. The platform, therdore, integrates ppt and video demonstrations for theoretical education, as well as software content "STACK-Up" for hands-on training. Theoretical education section provides specialized liberal arts knowledge on hydrogen, including renewable energy, hydrogen economy, and fuel cells. The software "STACK-Up" provides a hands-on practice on assembling the stack parts. Stack is the very core component of fuel cells. The Meta-Fuelcell platform improves the limitations of face-to-face education. It provides educators with the opportunities of non-face-to-face education without restrictions such as educational place, time, and occupancy. On the other hand, learners can choose educational themes, order, etc. It provides educators and learners with interesting experiences to be active in the metaverse space. This platform is being applied experimentally to a education project which is to develop advanced manpower in the fuel cell industry. Its improvement is in progress.

• Journal of the Korean Society for Library and Information Science
• /
• v.57 no.2
• /
• pp.271-291
• /
• 2023

The purpose of this study is to analyze the current status and effects of open access conversion of journals from 7 societies that participated in the "Open Access Publication Declaration Academic Societies in the Field of Library and Information Science", and to identify problems and suggest improvement directions. To this end, the study analyzed the current status based on the elements presented in the "Roadmap for Open Access Publishing Conversion of the Library and Information Science Journals in Korea" and analyzed citation rates. The following problems were identified. First, some journals were not applying CCL or were unable to register it accurately with KJCI, and none of the 7 journals were registered with DOAJ. Second, the newly used journal platforms had not yet registered all previous issues after the conversion. Third, there was a tendency for the article processing charges to be partially increased, and there was also a tendency for editorial staff expenses to increase. Fourth, citation indexes after conversion were lower for both journals compared to the previous 4-5 years. This study proposes that joint publication of journals is necessary to solve practical problems jointly with societies while promoting economies of scale and suggests the need for further development of a roadmap.

• Korean Journal of Agricultural Science
• /
• v.3 no.1
• /
• pp.95-104
• /
• 1976

This study was conducted to test the harvesting operation of two kinds of rice varieties such as Milyang #15 and Tong-il with a imported two furrow Japanese combine and was performed to find out the operational accuracy of it, the adaptability of this machine, and the feasibility of supplying this machine to rural area in Korea. The results obtained in this study are summarized as follows; 1. The harvesting test of the Milyang #15 was carried out 5 times from the optimum harvesting operation was good regardless of its maturity. The field grain loss ratio and the rate of unthreshed paddy were all about 1 percent. 2. The field grain loss of Tong-il harvested was increased from 5.13% to 10.34% along its maturity as shown in Fig 1. In considering this, it was needed that the combine mechanism should be improved mechanically for harvesting of Tong-il rice variety. 3. The rate of unthreshed paddy of Tong-il rice variety of which stem was short was average 1.6 percent, because the sample combine used in this study was developed on basisof the long stem variety in Japan, therefore some ears owing to the uneven stem of Tong-il rice could nat reach the teeth of the threshing drum. 4. The cracking rates of brown rice depending mostly upon the revolution speed of the threshing drum(240-350 rpm) in harvesting of Tong-il and Milyang #15 were all below 1 percent, and there was no significance between two varieties. 5. Since the ears of Tong-il rice variety covered with its leaves, a lots of trashes was produced, especially when threshed in raw materials, and the cleaning and the trashout mechanisms were clogged with those trashes very often, and so these two mechanisms were needed for being improved. 6. The sample combine of which track pressure was $0.19kg/cm^2$ could drive on the soft ground of which sinking was even 25cm as shown in Fig 3. But in considering the reaping height adjustment, 5cm sinking may be afford to drive the combine on the irregular sinking level ground without any readjustment of the resaping height. 7. The harvesting expenses per ha. by the sample combine of which annual coverage area is 4.7 ha. under conditions that the yearly workable days is 40, percentage of days being good for harvesting operation is 60%, field efficiency is 56%, working speed is 0.273m/sec, and daily workable hours is 8 hrs is reasonable to spread this combine to rural area in Korea, comparing to the expenses by the conventional harvesting expenses, if mechanical improvement is supplemented so as to harvest Tong-il rice. 8. In order to harvest Tong-il rice, the two furrow combine should be needed some mechanical improvements that divider can control not to touch ears of paddy, the space between the feeding chain and the thrshing drum is reduced, trash treatment apparatus must be improved, fore and rear adjust-interval is enlarged, and width of track must be enlarged so as to drive on the soft ground.

• The Korean Journal of Financial Management
• /
• v.10 no.1
• /
• pp.249-280
• /
• 1993

Recent financial theory views insurance policies as financial instruments that are traded in markets and whose prices reflect the forces of supply and demand. This article analyzes individual's insurance purchasing behavior along with capital market investment activities, which will provide a more realistic look at the tradeoff between insurance and investment in the individual's budget constraint. It is shown that the financial economic concept of insurance cost should reflect the opportunity cost of insurance premium. The author demonstrates the importance of riskless and risky financial assets in reaching an equilibrium insurance premium. In addition, the paper also investigates how the investment income could affect the four established theorems on traditional insurance literature. At the present time in Korea, the price deregulation is being debated as the most important current issue in insurance industry. In view of the results of this paper, insurance companies should recognize investment income in pricing their coverage if insurance prices are deregulated. Otherwise. price competition may force insurance companies to restrict coverage or to leave the market.