• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 1998.05a
• /
• pp.227-232
• /
• 1998

강상형교(Steel Box Girder Bridge)는 휨강성 및 비틀림강성이 I형이나 II형 단면에 비해서 현저하게 크고 가설시의 안전성도 우수하며, 완성후의 내하력도 크다는 장점을 갖고 있어 지간이 40-80m인 교량에 적용되는 대표적인 교량형식이며, 또한 경제적, 구조적인 특성을 고려하여 대분분이 연속교 형식으로 건설되고 있다. (중략)

• Journal of Bio-Environment Control
• /
• v.20 no.1
• /
• pp.50-57
• /
• 2011

This study investigates the structural safety of typical greenhouse to be utilized for developing plant factory. New long-span greenhouse systems were presented according to the results of structural analyses performed by finite-element program, ABAQUS. Reasonable values of design loads such as wind and snow loads in the Greenhouse Design Specifications (1995) were applied to check the new greenhouse systems. It was concluded that the new greenhouse systems were consistently safe enough to resist to both wind load and snow load. The new greenhouse system can be used to make simple and economic plant factory.

• The Journal of Engineering Geology
• /
• v.31 no.3
• /
• pp.343-355
• /
• 2021

Agricultural reservoirs seek human convenience by supplying agricultural water and providing flood damage effects and rest areas at the same time, but preventing them from aging reservoirs and earthquakes is important. The safety of levees is influenced by field material properties such as soil parameter values of the granular materials that make up the levees, but since precision safety diagnosis or general literature values are diverted, the final safety factors are limited to material properties alone. Since safety factors are determined by physical characteristic values and embankment shapes and have a significant impact on safety factors, accurate contemplation is required when examining reinforced cross sections. Therefore, this study analyzed the case of reasonable and economical reinforcement intersections when designing '◯◯reservoir' in Goheung-geun, Jeollanam-do using the GEP-SLOPE program to enable rational economic design of reinforcement intersections through repeated reviews. As a result of reducing and analyzing the first, second, and third seismic reinforcement of the levees, it was confirmed that the safety ratio was secured even with a significantly smaller amount of reinforcement than the first, second, and lower slopes by obtaining design standards of 1.20. In addition, when determining all seismic reinforcement cross-sectional shapes, it was confirmed that the shape that reinforces only the lower side rather than the upper side of the slope and the entire slope was economical with minimized cross-sectional reinforcement.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.6A
• /
• pp.417-424
• /
• 2011

This study focused on development of 60 m span PSC girder considering not only structural performance, but also economical efficiency and constructability including from the improvement of cross-section to the tendon profiles in sequence. Bulb-T type cross section was derived from optimization and actual possibilities to design a bridge were assessed through cross section evaluation. Tendons were also arranged efficiently so that the girder could resist the service load effectively. After developed girder was applied to a sample bridge, result of finite element analysis proved all load steps were satisfied with the allowable stress. Furthermore, it seemed that sufficient redundancy will be available to design a bridge safely. Based on these, a full-scale 60 m span girder was fabricated and 4 point bending test was performed. An initial crack occurred over twice of the service load in this experiment, which establishes adequate structural performance. 60 m span Half-Decked PSC girder developed in this study has a lower height for the given span which resulted from cross section improvement and efficient tendon layout. This girder also has not only the structural advantage, but also advantages in economical efficiency and constructability.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.12 no.1
• /
• pp.197-205
• /
• 1992

For the optimal design of composite breakwaters, a computer program PROCOBRA is developed using the combined ALM-BFGS algorithm. A model formulation for the section design optimization problem of composite breakwaters is proposed where a concept of subsectional weighting factors is introduced in the objective function. Usability of the program is verified through a numerical example. From the study, it is found that the ALM-BFGS method is reliable and can be effectively applied for the design optimization of coastal structures. Compared with conventional design process, it is proved that the economical design of composite breakwaters is possible.

• Proceedings of the KAIS Fall Conference
• /
• 2011.05a
• /
• pp.464-467
• /
• 2011

본 논문에서는 기존에 수행된 비탄성 영역 내 비지지 길이가 존재하고 균일단면을 가지는 I형 보의 좌굴 강도에 대한 해석적 이론적 연구를 토대로 변단면 I형보의 하중고 효과를 고려한 비탄성 횡-비틀림 좌굴강도에 대한 연구를 수행하였다. 유한요소해석에는 4절점 쉘요소인 S4R요소가 사용되었고, 플랜지 길이방향 비, 너비방향 비, 두께의 비로 스텝보를 나타내었으며, 집중하중을 작용시켰다. 개발된 좌굴강도 제안식은(오정재 등, 2011)과 해석결과를 하중고 효과 평가 시 큰 단면변화를 보이는 경우를 제외하고는 ${\pm}10%$의 오차범위를 나타내었다. 본 연구 결과는 다양한 형식의 I형보가 사용되는 빌딩 및 교량의 경제적이고 합리적인 설계의 근간을 제공해 줄 것이며, 향후 비탄성 횡-비틀림 좌굴강도에 대한 연구에도 많은 도움이 될 것이다.

• Journal of Animal Science and Technology
• /
• v.54 no.2
• /
• pp.89-94
• /
• 2012

The objective of this study was to estimate the genetic parameters and breeding value of swine using their economic traits. The traits considered were age at 90 kilograms body weight (D90 kg), backfat thickness (BF) and eye muscle area (EMA). Estimation of genetic parameters and breeding value from 18,668 heads considering the economic traits were based on farm performance data from May 2007 to April 2011. Estimation of genetic parameters based on economic traits revealed that the single best model was fitted after finding source of variance on fixed and random effects and estimated by a multiple trait model using DF-REML (Derivative-FREE Restricted Maximum Likelihood). In this study, the estimated heritabilities of Duroc, Berkshire, Landrace and Yorkshire were about 0.22-0.59 for the D90 kg, 0.47-0.62 for the BF and 0.23-0.37 for the EMA. Genetic correlation of D90 kg with BF and EMA of the four breeds were -0.01-0.24 and -0.35--0.23, respectively. Moreover, the genetic correlation of BF with EMA was -0.68--0.17. On the other hand, the phenotypic correlation of D90 kg with BF and EMA of the four breeds were about 0.01-0.11 and -0.37--0.21, respectively, while the phenotypic correlation of BF with EMA was -0.68--0.17. Results showed that the genetic trends of breeding value every year were decreasing for D90 kg, increasing for BF while for EMA inconsistent values were obtained.

• Journal of Korean Society of Steel Construction
• /
• v.30 no.1
• /
• pp.59-66
• /
• 2018

In this study, the parametric analysis for the buckling behavior of plates stiffened with the new type(${\Box}$ type) ribs was performed. Changes of the buckling capacity according to dimensions of ${\Box}$ type ribs show certain behaviors, so that the system to find the section of ${\Box}$ type ribs under the specific buckling capacity can be proposed. Applying this system to the steel deck of existing bridges, more economic sections of ${\Box}$ type ribs rather than that of closed ribs can be obtained. Therefore, the economic section of steel deck having the required buckling capacity can be designed by using the proposed system of ${\Box}$ type ribs.

• Tunnel and Underground Space
• /
• v.22 no.5
• /
• pp.310-320
• /
• 2012

This paper describes the design and construction of a 2-arch tunnel with varying section. This new design has advantages of 2-arch tunnels, which is rather expensive, but is still economically competitive compared to parallel tunnels. Economic analysis was also conducted. To secure the stability of the varying section tunnel, excavated part was reinforced by tie-bolts and RRS, and 2-arch part was supported by EPS blocks and concrete walls. Stability of the pillar was theoretically analyzed and also examined by numerical simulations for various widths. Displacement monitoring was conducted and results were compared with numerical results. Economic analysis showed reductions in construction cost and period by 11% and 10 months respectively.

• Korea journal of population studies
• /
• v.24 no.1
• /
• pp.91-121
• /
• 2001

This paper attempts to investigate the influence of IMF economic crisis on family lives through questionnaire survey of 1001 women in Seoul. According to the results of the survey, we found the following changes that the economic crisis brought to the family lives. With the unemplyment, communication between husbands and wives became more dense in both positive and negative ways. While the possibility of violence and separation beteen husbands and wives was relatively low, violence against the children more directly reflects the economic difficulties . In the economic crisis, relatives are more important resouces for supports than friends and social welfare institutions . Especially the families of the wives are the most important supporters. Through the changes of consumption pattern in economic crisis. we confirmed that the expences for cultural activities, the hospitals and private education have some flexibility. That is, those expences firstly decreased in the economic crisis. Confronting the economic difficulties economic motivation of women to find works became stronger and we saw same possibility of changes of women\`s role pattern by undergoing economic difficulties.