• Elastomers and Composites
• /
• v.10 no.2
• /
• pp.136-156
• /
• 1975

고무는 불량열전도체(不良熱傳導體)이며 두께가 두꺼우면 내부(內部)가 적정온도수준(適正溫度水準)에 이르기 전까지 가황시간(加黃時間)이 길어진다. 가황온도(加黃溫度)가 상승(上昇)할수록 가황물(加黃物)의 물성(物性)은 열화(劣化)되는 경향(傾向이) 있다. 천연(天然)고무든지 합성(合成)고무든지 간(間)에 과가황(過加黃)에 대(對)한 저항성(抵抗性)이 나쁘므로 특(特)히 고온가황(高溫加黃)에 대(對)해 민감(敏感)하다. 이것은 고온(高溫)에서 단시간(短時間) 가황(加黃)일수록 가속(加速)된다. 평탄가황배합물(平坦加黃配合物)의 경우에서 보더라도 내부(內部)가 적절(適切)히 가황(加黃)되기도 전(前)에 외부(外部)는 과가황(過加黃)이 되는 수가 있다. 근래(近來) 발간(發刊)된 문헌(文獻)에서도 이러한 내용(內容)이 잘 설명(說明)이 되어 있는데 다른 각도(角度)에서 고찰(考察)해 볼것 같으면 정체시간(停滯時間)이 비교적(比較的) 길지 않는 한(限) 가황시간(加黃時間)은 정체시간(停滯時間)과 sheet 가황시간(加黃時間)과의 합(合)이라고 말할 수 있겠다. 예(例)를 들어 설명(說明)하자면 $130^{\circ}C(266^{\circ}F)$에서 정체시간(停滯時間)이 10분(分)이고 sheet 가황시간(加黃時間)이 20분(分)인 제품(製品)은 이 온도(溫度)에서 30분간(分間) 가황(加黃)해야 된다는 것이다. 온도계수(溫度係數)를 2라고 가정(假定)할 경우 $140^{\circ}C(284^{\circ}F)$에서의 가황시간(加黃時間)은 $30\times\frac{1}{2}=15$분(分)이 아니라 $20\times\frac{1}{2}+10=20$분(分)이 된다. 크기가 큰 제품(製品)은 보통(普通) 다음에 있는 여러 방법(方法)들 가운데 한 가지 또는 여러가지를 조합(組合)하여 가황(加黃)시킨다. a) 크기가 작은 것에 대한 것 보다 낮은 온도(溫度)에서 가황(加黃)한다. b) 침투가황-제품(浸透加黃-製品)을 가압하(加壓下)에 두고서 외부가황(外部加黃)은 단속(斷續)시키고 열(熱)이 중심(中心)으로 침투(浸透)하게 한다. c) 단계가황(段階加黃)-처음에는 저온(低溫)에서 시작(始作)하여 일정간격(一定間隔)을 두고 점차(漸次) 온도(溫度)를 상승(上昇)시켜 최종적(最終的)으로 가황온도(加黃溫度)까지 올린다. d) 가능(可能)하다면 metal base나 금형(金型)에서 고무를 증기가황(蒸氣加黃)시킬 경우에 있어서 속이 빈 축(軸)을 사용하여 내부(內部)로 부터 가열(加熱)하면 가황시간(加黃時間)이 단축(短縮)된다. e) 냉각중(冷却中)의 후가황(後加黃)-이것은 가열장치(加熱裝置)에서 끄집어낸 후 제품(製品)의 외부(外部)를 냉각(冷却)시키는 방법(方法)이다. 가열(加熱)된 제품(製品)이 쌓여 있거나 적절(適切)하게 냉각(冷却)되지 않을 때 가황(加黃)이 추가적(追加的)으로 되거나 과가황(過加黃)이 될 우려가 있는 제조공정(製造工程)에서는 흔히들 이 방법(方法)을 무시(無視)하고 있다. 여기서 강조(强調)해 두어야 할 것은 항상 제품(製品)의 외부(外部)를 완전(完全)히 가황(加黃)시킬 필요(必要)는 없다는 것이다. 다공성(多孔性)이나 기포생성(氣泡生成)을 조장(助長)하는 불량가황상태(不良加黃狀態)와 표면(表面)에서의 과가황상태간(過加黃狀態間)의 균형(均衡)을 취(取)해 줘야 하는데 물론(勿論) 이때는 가황시간(加黃時間)을 단축(短縮)시켜야 한다는 경제적(經濟的)인 측면(側面)도 아울러 고려(考慮)해야 한다. 이것은 고무기술자(技術者)가 당면(當面)해야할 과제(課題)에 속(屬)하며 바람직 한것은 본장(本章)의 내용(內容)이 여러 상황하(狀況下)에서 당면(當面)한 문제(問題)에 대(對)해 어떻게 대처(對處)해 야 할지를 모르는 여러 기술자(技術者)들에게 도움이 되었으면 하는 것이다.

• Korean journal of communication and information
• /
• v.34
• /
• pp.196-243
• /
• 2006

The popularity of Korea pop culture, which called as the name of "Korea wave", has started to spread out in China and other Asian states from late-1990's. The study about "Korea wave" until now, however, have prevailed within an economic point of view. So, I would like to clarify that this dissertation raises a question in exiting argument and explains the identity of "Korea wave" by investigating the details of pop culture contents of Korea, and understanding of chinese receiver. It shows that chinese receiver, watching the movie , has estimated in the affirmative viewpoint after I have analyzed a reply of movie web-site in China. The main features of this analysis prove that there are a lot of good estimation when chinese receiver have seen that movie because it has been well-matched with emotion and fun of story and attraction in the movie. In that order, Some Chinese netizen evaluated that there are some negative point of view as the main actress has a strange and crazy behavior. I have also found that Korea pop culture contents has not given to them good image and chinese receiver had a tendency to view objectively to classify with strength and weakness. Analysis to contrast understanding of Chinese netizen with Korea netizen showed that Korea netizen emphasized fun of story, however, Chinese netizen showed that they had a lot of opinion to be fresh and realistic relatively. In conclusion, I would like herewith to identify that there are some differences between Chinese netizen and Korean netizen after contacting the movie. The reason has showed that understanding about the same object can be a great deal of various consideration in two more diverse cultures which have many different social-cultural and historical situation.

• Korean Journal of Agricultural Science
• /
• v.8 no.1
• /
• pp.90-96
• /
• 1981

To design more efficient agricultural machinery, the accurately measuring system among many other factors is essential. A light-beam oscillographic recorder is generally used in measuring dynamic strain but it is not compatible with the extremely high speed measuring system such as 1,000 m/s, also is susceptable to damage due to vibration while using the system in field. The recorder used light sensitive paper for strip chart recording. The reading and analysis of data from the strip charts is very cumbersome, errorneous and time consuming. A microcomputer was interfaced with A/D converter, microcomputer program was developed for measuring, system calibration was done and the strain generated from a cantilever beam vibrator was measured. The results are summarized as follows. 1. Microcomputer program was developed to perform strain measuring of agricultural machine elements and could be controled freely the measuring intervals, no. of channels and no. of data. The maximum measuring speed was $62{\mu}s$. 2. Calibration the system was performed with triangle wave generated from a function generator and checked by an oscilloscope. The sampled data were processed using HP 3000 minicomputer of Chungnam National University computer center the graphical results were triangle same as input wave and so the system have been out of phase distorsion and amplitude distorsion. 3. The strain generated from a cantilever beam vibrator which has free vibration period of 0.019 second were measured by the system controlled to have l.0 ms of time interval and its computer output showing vibration curve which is well filted to theoretical value. 4. Using microcomputer on measuring the strain of agricultural machine elements could not only save analyzing time and recording papers but also get excellent adaptation to field experiment, especially in measurement requiring high speed and good precision.

• KDI Journal of Economic Policy
• /
• v.12 no.4
• /
• pp.21-46
• /
• 1990

This paper, a sequel to Yoo and Lee (1990), attempts to investigate the interindustry determinants of technical efficiency in Korea's manufacturing industries, and also to conduct an exploratory analysis on the stability of technical efficiency over time. The hypotheses set forth in this paper are most found in the existing literature on technical efficiency. They are, however, revised and shed a new light upon, whenever possible, to accommodate any Korea-specific conditions. The set of regressors used in the cross-sectional analysis are chosen and the hypotheses are posed in such a way that our result can be made comparable to those of similar studies conducted for the U.S. and Japan by Caves and Barton (1990) and Uekusa and Torii (1987), respectively. It is interesting to observe a certain degree of similarity as well as differentiation between the cross-section evidence on Korea's manufacturing industries and that on the U.S. and Japanese industries. As for the similarities, we can find positive and significant effects on technical efficiency of relative size of production and the extent of specialization in production, and negative and significant effect of the variations in capital-labor ratio within industries. The curvature influence of concentration ratio on technical efficiency is also confirmed in the Korean case. There are differences, too. We cannot find any significant effects of capital vintage, R&D and foreign competition on technical efficiency, all of which were shown to be robust determinants of technical efficiency in the U.S. case. We note, however, that the variables measuring capital vintage effect, R&D and the degree of foreign competition in Korean markets are suspected to suffer from serious measurement errors incurred in data collection and/or conversion of industrial classification system into the KSIC (Korea Standard Industrial Classification) system. Thus, we are reluctant to accept the findings on the effects of these variables as definitive conclusions on Korea's industrial organization. Another finding that interests us is that the cross-industry evidence becomes consistently strong when we use the efficiency estimates based on gross output instead of value added, which provides us with an ex post empirical criterion to choose an output measure between the two in estimating the production frontier. We also conduct exploratory analyses on the stability of the estimates of technical efficiency in Korea's manufacturing industries. Though the method of testing stability employed in this paper is never a complete one, we cannot find strong evidence that our efficiency estimates are stable over time. The outcome is both surprising and disappointing. We can also show that the instability of technical efficiency over time is partly explained by the way we constructed our measures of technical efficiency. To the extent that our efficiency estimates depend on the shape of the empirical distribution of plants in the input-output space, any movements of the production frontier over time are not reflected in the estimates, and possibilities exist of associating a higher level of technical efficiency with a downward movement of the production frontier over time, and so on. Thus, we find that efficiency measures that take into account not only the distributional changes, but also the shifts of the production frontier over time, increase the extent of stability, and are more appropriate for use in a dynamic context. The remaining portion of the instability of technical efficiency over time is not explained satisfactorily in this paper, and future research should address this question.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.1
• /
• pp.183-192
• /
• 2001

The purpose of this study is to verify the relation between vegetarian diet and the risk factors of cardiovascular disease. To do the present study the vegetarians were selected; 127 Buddhist nuns (age : 23 ~ 79 yrs) from Oonmoon Temple in Choungdo District, Gyeongsang Book-do. For control subjects, 235 healthy female adults (age : 23~79yrs) were selected. They were the teachers, the nurses of the hospital of Gyeongsang National University and the housekeepers living in Chinju Gyeongsang Nam-do. This study was conducted from October 1996 to February 1997. The contents are consisted of anthropometric measurement, questionnaries about eating behavior and intake frequency of food group and clinical examination. The results were summarized as follows. The average ages of vegetarians and non-vegetarians were 44.2 yrs and 40.5 yrs respectively. Average body mass index (BMI) of vegetarians and non-vegetarians were 22.4 and 21.0, WHR were 0.8 and 0.8, percentage of body fat were 28.7 and 26.5 and the average duration of vegetarian diet of the vegetarians was 13.1 years. Eating behavior score of vegetarian was significantly higher than those of non-vegetarians. Eating behavior score was negatively of correlated with levels of serum total-cholesterol, LDL-cholesterol and atherogenic index (AI). In intake frequency of green vegetable, lemon-yellow vegetable, bumb and seaweeds of the vegetarians more than those of non-vegetarians. Levels of total cholesterol, LDL-cholesterol, AI, diastolic blood pressure, blood sugar and HDL cholesterol of non-vegetarians were significantly higher (p<0.01) than those of vegetarians, but ratio of HDL cholesterol/total-cholesterol was lower in non-vegetarians. Consequently, vegetable diet can be considerably diet help to decrease the risk of cardiovascular disease.

• Journal of agricultural medicine and community health
• /
• v.34 no.1
• /
• pp.58-66
• /
• 2009

Objectives: Active participation of poultry breeder in surveillance system of Avian Influenza (AI) is very important. Therefore this study was conducted to present basis data for active report of AI that is affected by media's coverage in poultry breeder. Methods: Subjects were 88 persons, 28 who were poultry breeder at epidemic area of AI and 60 who were general person at non-epidemic area. Data were collected by the trained investigator from Jul. 1 to Aug. 31, 2008. Respondents were interviewed by means of a structured questionnaire. Results: The third-person effect among perceptions of influence in media's report on the AI was higher in breeder (32.1%) than in non-breeder (10.0%). However, Confidence to media report on the AI was lower in breeder than in non-breeder. Intention to report of the AI was 71.4% in breeder respectively, was 90.0% in non-breeder. There was statistically significant lower in breeder than non-breeder. The cause of avoidance of report was 'economic damage' for 87.5%, which acocounted for the majority of cases. Confidence to media report on the AI were positively correlated with concern on the AI and perception on seriousness of the AI, but negatively correlated with the third-person effect. Conclusions: These results showed that intention to report of the AI of breeder was susceptible to influenced by the third person effect and confidence in media's report on the AI. Therefore we should give a special attention to increase active report of poultry breeder during epidemic period of AI which is consideration of reasonable strategy of media's coverage, including mind and emotion state of poultry breeder.

• Journal of the Korean Geographical Society
• /
• v.40 no.2 s.107
• /
• pp.221-241
• /
• 2005

Land Use and Land Cover Changes (LUCC) occur over a wide range of space and time scales, and involve complex natural, socio-economic, and institutional processes. Therefore, modelling and predicting LUCC demands an understanding of how various measured properties behave when considered at different scales. Understanding spatial and temporal variability of driving forces and constraints on LUCC is central to understanding the scaling issues. This paper aims to 1) assess the heterogeneity of land cover change processes over the landscape in northern Ghana, where intensification of agricultural activities has been the dominant land cover change process during the past 15 years, 2) characterise dominant land cover change mechanisms for various spatial scales, and 3) identify the optimal spatial scale for LUCC modelling in a savanna landscape. A multivariate statistical method was first applied to identify land cover change intensity (LCCI), using four time-sequenced NDVI images derived from LANDSAT scenes. Three proxy land use change predictors: distance from roads, distance from surface water bodies, and a terrain characterisation index, were regressed against the LCCI using a multi-scale hierarchical adaptive model to identify scale dependency and spatial heterogeneity of LUCC processes. High spatial associations between the LCCI and land use change predictors were mostly limited to moving windows smaller than 10$\times$10km. With increasing window size, LUCC processes within the window tend to be too diverse to establish clear trends, because changes in one part of the window are compensated elsewhere. This results in a reduced correlation between LCCI and land use change predictors at a coarser spatial extent. The spatial coverage of 5-l0km is incidentally equivalent to a village or community area in the study region. In order to reduce spatial variability of land use change processes for regional or national level LUCC modelling, we suggest that the village level is the optimal spatial investigation unit in this savanna landscape.

• Journal of Korean Home Economics Education Association
• /
• v.16 no.3
• /
• pp.1-25
• /
• 2004

This study analyzes the external forms of the household textbooks and also the contents of them used at girls' middleㆍhigh schools during the period of Japanese ruling over Korea. To this end, 8 household textbooks published from 1928 to 1937 were analyzed. The results of the study are summarized as follows. 1. The household subject had become the one of the most important subjects to girl students as the practical uses were emphasized in educational area during the period. As a result. the classes of the household were the second in hours, following the class of Japanese (the national language) to girl students. 2. The contents of the household textbooks were intended to contain 'the modern' and 'the newest'. The students were also suggested to apply the contents of the textbooks to real home life. Many pictures, photos and illustrations were included in household textbooks to help students to understand the contents of the subject. 3. The purposes of the household class were the reformation of the living conditions and home economics. 4. The external characteristics of the household textbooks during the period were as follows. - Written in Japanese vertically and the size of the textbook was A5 (150/210) with pulp paper of good quality - The type style of the body of the textbooks was Ming-style type- The sequent order of the textbooks was the outer cover, the title page, pictorial, introduction, table of contents, the body, appendix and the back cover. 5. The household textbooks consisted of the first volume and the second volume. The first volume contained clothing and textiles, food and nutrition and housing. Taking care of the aged. nursing. child care, household economy and home management were included in the second volume. 6. The household textbooks were designed to make women the housewives.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.322-331
• /
• 2017

District heating was first introduced in Korea in 1985. As the service life of the underground thermal piping network has increased for more than 30 years, the maintenance of the underground thermal pipe has become an important issue. A variety of complex technologies are required for periodic inspection and operation management for the maintenance of the aged thermal piping network. Especially, it is required to develop a model that can be used for decision making in order to derive optimal maintenance and replacement point from the economic viewpoint in the field. In this study, the analysis was carried out based on the repair history and accident data at the operation of the thermal pipe network of five districts in the Korea District Heating Corporation. A failure probability model was developed by introducing statistical techniques of qualitative analysis and binomial logistic regression analysis. As a result of qualitative analysis of maintenance history and accident data, the most important cause of pipeline damage was construction erosion, corrosion of pipe and bad material accounted for about 82%. In the statistical model analysis, by setting the separation point of the classification to 0.25, the accuracy of the thermal pipe breakage and non-breakage classification improved to 73.5%. In order to establish the failure probability model, the fitness of the model was verified through the Hosmer and Lemeshow test, the independent test of the independent variables, and the Chi-Square test of the model. According to the results of analysis of the risk of thermal pipe network damage, the highest probability of failure was analyzed as the thermal pipeline constructed by the F construction company in the reducer pipe of less than 250mm, which is more than 10 years on the Seoul area motorway in winter. The results of this study can be used to prioritize maintenance, preventive inspection, and replacement of thermal piping systems. In addition, it will be possible to reduce the frequency of thermal pipeline damage and to use it more aggressively to manage thermal piping network by establishing and coping with accident prevention plan in advance such as inspection and maintenance.

• The Korean Journal of Financial Management
• /
• v.10 no.1
• /
• pp.249-280
• /
• 1993

Recent financial theory views insurance policies as financial instruments that are traded in markets and whose prices reflect the forces of supply and demand. This article analyzes individual's insurance purchasing behavior along with capital market investment activities, which will provide a more realistic look at the tradeoff between insurance and investment in the individual's budget constraint. It is shown that the financial economic concept of insurance cost should reflect the opportunity cost of insurance premium. The author demonstrates the importance of riskless and risky financial assets in reaching an equilibrium insurance premium. In addition, the paper also investigates how the investment income could affect the four established theorems on traditional insurance literature. At the present time in Korea, the price deregulation is being debated as the most important current issue in insurance industry. In view of the results of this paper, insurance companies should recognize investment income in pricing their coverage if insurance prices are deregulated. Otherwise. price competition may force insurance companies to restrict coverage or to leave the market.