• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.130-130
• /
• 2017

각 수계의 다기능보는 흐름 통제 단면으로서의 중요한 기능인 정밀한 유량 산정이 가능한 수리구조물이므로 다기능보를 각 유역의 표준유량을 산정할 수 있는 국가 유량기준점으로 활용할 수 있는 방안을 강구하는 것이 바람직하다. 현재 보의 방류량 산정 방법은 보의 설계 당시 수리모형실험과 1차원 수치모의 등의 방법에 의해 산정된 결과를 활용한 것으로 보의 상류 수위만을 고려하여 보의 방류량을 산정하는 방법으로 배수위 영향을 반영할 수 없을 뿐만 아니라 유량 측정시설로서의 보의 수리적 장점을 활용하지 못하는 한계가 존재한다. 이에 본 연구에서는 현행 방류량 산정 방법과 기존 연구의 한계점을 검토하여 보 상하류 수위와 보의 수리적 유량측정 기능을 상호 보완적으로 활용하여 방류량 추정량을 개선시킬 수 있는 수정 경사-면적법을 새롭게 제안하였으며, 금강의 백제보, 영산강의 승촌보, 죽산보를 대상으로 적용하고, 연구 결과의 적정성을 검토하였다. 적용 결과, 기존 방법은 하류 수위에 관계없이 보 상류의 수위가 상승하게 되면 증가하고, 반대로 하강하게 되면 방류량이 감소하는 등 상류 수위의 패턴을 그대로 따라가는 것을 알 수 있었으며, 수정 경사-면적법을 활용하여 추정한 결과, 상시적으로 변하는 상하류 수위차에 따라 방류량이 변동하여 보다 물리적인 현상을 더 잘 반영하는 것으로 판단된다.

• Journal of Korea Society of Industrial Information Systems
• /
• v.13 no.1
• /
• pp.57-67
• /
• 2008

In this paper, we present an adaptive block matching motion estimation using optical flow. In the proposed algorithm, we calculate the temporal and spatial gradient value for each pixel value from tile differential filter, and estimate the optical flow which is used to decide the location and the size of the search region from the gradient values by least square optical flow algorithm. In particular, the proposed algorithm showed a excellent performance with fast and complex motion sequences. From the computer simulation for various motion characteristic sequences. The proposed algorithm shows a significant enhancement of PSNR over previous blocking matching algorithms.

• Proceedings of the Korean Environmental Sciences Society Conference
• /
• 2003.11b
• /
• pp.106-111
• /
• 2003

본 연구에서는 수위-유량곡선식의 정도를 개선하는 방안으로 수위를 추정하는 과정에서 수면경사법을 이용하여 계산한 수위와 HEC-RAS 3.1.1 의 부정류 계산을 하여 얻어진 수위를 이용하여 유량을 계산한 값을 비교하였다. 그 결과 관측된 유량과 계산된 유량의 상대편차는 5.37%로 양호한 결과를 얻을 수 있었으며. 수면경사법을 이용하여 수위를 계산하여 수위-유량곡선식을 유도하는 것보다 HEC-RAS 3.1.1 부정류 모형을 이용한 수위자료를 이용하여 수위-유량곡선식을 유도하는 것이 정도를 높일 수 있을 것이라 판단된다.

• Tunnel and Underground Space
• /
• v.23 no.1
• /
• pp.31-41
• /
• 2013

Graphical method has been widely applied to the prediction of subsidence area, and is known to have advantages in analysis of trough subsidence which is common in horizontally seamed mine area. However, it is reported that most of the ore bodies in Korea are geologically inclined from sub-horizontal to steep, and therefore, the sinkhole subsidence is frequent in abandoned mine area. For these reasons, it is not to be desired that graphical method is applied for predicting the subsidence occurrence. This paper describes the results of subsidence zone prediction considering the dip direction and the opposite direction of inclined ore bodies from the case studies on the 163 subsidence occurrence regions. The results show also the assumed angle which can define the range of subsidence in the surface area. In conclusion, the limit of this angle is suggested after taking into account the comparison with graphical method and the application to the case histories.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.49 no.2
• /
• pp.130-136
• /
• 2012

In this paper, we propose a near-field range estimation method for a uniform linear array that can calibrate bearing estimation error which give a bad influence on a range estimation process. When a range is fixed, the bearing error is calibrated to maximize the beamformer output by the proposed algorithm based on the gradient method. Simulation results show that the proposed algorithm can compensate the bearing error which is less than the mainlobe beamwidth so that reduce the range estimation error as similar as the case of no bearing error.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.21 no.3
• /
• pp.283-289
• /
• 2011

In this research a controller based on velocity estimator for a Wheeled Inverted Pendulum (WIP) is designed and various numerical simulation studies are carried out. The WIP has stable and unstable equivalent points. To Keep the unstable equilibrium point, a controller should control carefully the wheels persistently. There are angle, angular velocity, displacement, and velocity of the WIP for controller inputs. The velocity is obtained by differentiating the encoder signals from the motor and is subject to the resolution of the encoder. An improved velocity detection method is proposed based on low resolution encoder and velocity estimator. Various numerical simulations are carried out for showing the validation of the velocity estimator in case of the inclined road condition.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.32 no.2A
• /
• pp.97-108
• /
• 2012

Dynamic responses were measured using long-term monitoring system for Uldolmok tidal current pilot power plant which is one of jacket-type offshore structures. Among the dynamic quantities, the tilt angle was chosen because the low frequency response components can be precisely measured by dynamic tiltmeter, and the natural frequencies and modal damping ratio were successfully identified using proposed LS-FDD (least squared frequency domain decomposition) method. And the effects of tidal height and tidal current velocity on the variation of natural frequencies and modal damping ratios were investigated in time and frequency domain. Also the non-parametric models were tested to model the relationship between tidal conditions and modal properties such as natural frequencies and damping ratios.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.2
• /
• pp.137-147
• /
• 2008

A reliability analysis has been performed to investigate the systematic stability of multi-failure modes of rubble-mound breakwaters. The reliability functions of four different failure modes are established straightforwardly. AFDA(Approximate Full Distribution Approcah) reliability models for each failure modes are directly developed and satisfactorily calibrated through the comparison with CIAD's results. In the reliability analysis of single failure mode, the probabilities of failure are calculated and the influence coefficients of random variables in the failure modes are properly evaluated. Meanwhile, three different models such as uni-modal bounds, bimodal bounds, and PNET are applied to evaluate the probabilities of failure of multi-failure modes for rubble-mound breakwaters. It may be found that uni-modal bounds tend to overestimate the probability of failure of multi-failure modes. Therefore, for the systematic reliability analysis of multi-failure modes, it is recommended to use bi-modal bounds or PNET which consider the correlation between the failure modes for rubble-mound breakwaters. By introducing the reliability analysis of multi-failure modes, it could be possible to find out the additional probabilities of failure occurred by the multi-failure modes of a multi-component system such as rubble-mound breakwaters.

• Journal of Cadastre & Land InformatiX
• /
• v.46 no.2
• /
• pp.43-55
• /
• 2016

This study estimated land prices using instance-based learning. A k-nearest neighbor method was utilized among various instance-based learning methods, and the 10 distance metrics including Euclidean distance were calculated in k-nearest neighbor estimation. One distance metric prediction which shows the best predictive performance would be normally chosen as final estimate out of 10 distance metric predictions. In contrast to this practice, an ensemble technique which combines multiple predictions to obtain better performance was applied in this study. We applied the gradient boosting algorithm, a sort of residual-fitting model to our data in ensemble combining. Sales price data of farm lands in Haenam-gun, Jeolla Province were used to demonstrate advantages of instance-based learning as well as an ensemble technique. The result showed that the ensemble prediction was more accurate than previous 10 distance metric predictions.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.34 no.2
• /
• pp.37-45
• /
• 2022

A simplified model using the lifetime distribution has been presented to estimate the Mean Residual Life (MRL) of rubble-mound breakwaters, which is not like a stochastic process model based on time-dependent history data to the cumulative damage progress of rubble-mound breakwaters. The parameters involved in the lifetime distribution can be easily estimated by using the upper and lower limits of lifetime and their likelihood that made a judgement by several experts taking account of the initial design lifetime, the past sequences of loads, and others. The simplified model presented in this paper has been applied to the rubble-mound breakwater with TTP armor layer. Wiener Process (WP)-based stochastic model also has been applied together with Monte-Carlo Simulation (MCS) technique to the breakwater of the same condition having time-dependent cumulative damage to TTP armor layer. From the comparison of lifetime distribution obtained from each models including Mean Time To Failure (MTTF), it has found that the lifetime distributions of rubble-mound breakwater can be very satisfactorily fitted by log-normal distribution for all types of cumulative damage progresses, such as exponential, linear, and logarithmic deterioration which are feasible in the real situations. Finally, the MRL of rubble-mound breakwaters estimated by the simplified model presented in this paper have been compared with those by WP stochastic process. It can be shown that results of the presented simplified model have been identical with those of WP stochastic process until any ages in the range of MTT F regardless of the deterioration types. However, a little of differences have been seen at the ages in the neighborhood of MTTF, specially, for the linear and logarithmic deterioration of cumulative damages. For the accurate estimation of MRL of harbor structures, it may be desirable that the stochastic processes should be used to consider properly time-dependent uncertainties of damage deterioration. Nevertheless, the simplified model presented in this paper can be useful in the building of the MRL-based preventive maintenance planning for several kinds of harbor structures, because of which is not needed time-dependent history data about the damage deterioration of structures as mentioned above.