• Journal of the Korean Geosynthetics Society
• /
• v.4 no.4
• /
• pp.47-56
• /
• 2005

With the need of efficient site use retaining walls have frequently used. Of them dry cast modular block wall(MBW), in which geogrid and concrete block are used is getting popular because of its simplicity and economical efficiency of construction. However, since this method is based on the theory of earth pressure, sands with good quality should be used. In contrast, reinforced soil slope(RSS) that the slope is less than $70^{\circ}$ can use wider range of soil than MBW. A hybrid reinforced geo-structure might be a good alternative in view of overcoming difficulty obtaining soils with good quality as well as maximizing the efficiency of site use. This method is composed of reinforced block wall and reinforced soil slope. In this method, reinforced block wall is constructed up to a certain height vertically at ground boundary first. Reinforced soil slope is then constructed on the block wall subsequently. This paper introduces several technical points that should be taken into account in design and construction.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.81-81
• /
• 2017

최근 발생하는 태풍 또는 국지성호우는 단기간에 많은 양의 강우를 동반하고 있으며, 이로인한 내수침수 및 외수범람 피해가 빈번히 발생하고 있다. 이와 같은 홍수피해를 저감하기 위한 하나의 대책으로 내수 또는 외수로 인한 피해를 미리 예측하고 대비하는 방법이 필요하다. 피해를 미리 예측하기 위한 기존의 모델들은 지표유출, 지하유출, 침투, 증발산 등 다양한 강우-유출 알고리즘에 의해 홍수범람모의를 분석하게 된다. 따라서 그 모의시간이 길게 나타나 재난상황을 대처하는 데 문제가 있다. 본 연구에서는 홍수로 인한 제내지의 침수 확산 경로 빠른 시간 안에 모의하기 위하여 여러 가지 알고리즘을 단순화시킨 홍수범람 모형을 개발하였다. 개발된 분포형 홍수범람 모형인 SIMOD(Simplified Inundation MODel)는 홍수가 발생된 시점에서 그리드화된 주변셀로의 홍수전의를 위하여 주변셀과의 경사를 이용하여 차등 분배하는 다중흐름방향법(Multi Direction Method, MDM)과, 하나의 낮은 고도의 셀에서 수위가 높아져 인접셀보다 수위가 증가하면 그 수위는 인접 셀들과 균등해 진다는 가정인 평수가정법(Flat-Water Assumption, FWA)인 두 가지 알고리즘을 이용한다. 개발된 모형의 적합성을 확인하기 위하여 상용 모형인 FLO-2D를 이용하여 각 모의시간별 침수면적과 모형의 구동시간을 비교하였다. 비교결과 초기 1시간을 제외하고 홍수피해 면적이 10% 전후로 나타나 SIMOD의 적용성이 확인되었다. 모의 구동시간의 경우 32시간 모의시 SIMOD는 10분 안에 결과가 나오는 반면 FLO-2D는 1시간 이상 소요되는 것으로 나타났다. 또한 대피계획을 수립하기 위하여 제방붕괴시나리오를 이용한 제내지 침수모의를 실시하였다. 대상지역은 금호강하류 성서산업단지 유역으로 계획홍수위는 200년 빈도 홍수위를 기준으로 하였으며 폭 35m, 높이 7m의 제방파제로 인한 외수위 유입을 가정하여 제내지의 시간별 침수면적 모의하였다. 모의된 결과를 이용하여 시간대별 대피경로를 산정함으로써 홍수로 인한 대피 계획 수립에 적용 가능함을 확인하였다.

• Journal of Korea Water Resources Association
• /
• v.49 no.7
• /
• pp.579-588
• /
• 2016

Changes in precipitation due to climate change is made to induce the local and intensive rainfall, it is increasing damage caused by inland inundation. Therefore, it requires a technique for predicting damage caused by flooding. In this study, in order to determine whether this flood inundated by any route when the levee was destroyed, Which can simulate the path of the flood inundation model was developed for the SIMOD (Simplified Inundation MODel). Multi Direction Method (MDM) for differential distributing the adjacent cells by using the slope and Flat-Water Assumption (FWA)-If more than one level higher in the cell adjacent to the cell level is the lowest altitude that increases the water level is equal to the adjacent cells- were applied For the evaluation of the model by setting the flooding scenarios were estimated hourly range from the target area. SIMOD model can significantly reduce simulation time because they use a simple input data of topography (DEM) and inflow flood. Since it is possible to predict results within minutes, if you can only identify inflow flood through the runoff model or levee collapse model. Therefore, it could be used to establish an evacuation plan due to flooding, such as EAP (Emergency Action Plan).

• Journal of the Korean Geotechnical Society
• /
• v.29 no.7
• /
• pp.75-89
• /
• 2013

This paper describes a GIS-based geohydrologic methodology, called YSGWF (YonSei GroundWater Flow) for predicting the rainfall infiltration-groundwater flow of slopes. This physical-based model was developed by the combination of modified Green-Ampt model that considers the unsaturated soil parameters and GIS-based raster model using Darcy's law that reflects the groundwater flow. In the model, raster data are used to simulate the three dimensional inclination of bedrock surface as actual topographic data, and the groundwater flow is governed by the slope. Also, soil profile is ideally subdivided into three zones, i.e., the wetting band zone, partially saturated zone, and fully saturated zone. In the wetting band and partially saturated zones the vertical infiltration of water (rainfall) from surface into ground is modeled. When the infiltrated water recharges into the fully saturated zone, the horizontal flow of groundwater is introduced. A comparison between the numerical calculation and real landslide data shows a reasonable agreement, which indicate that the model can be used to simulate real rainfall infiltration-groundwater flow.