• Journal of the Korean Ceramic Society
• /
• v.41 no.1
• /
• pp.62-68
• /
• 2004

In this study, SHS process has been employed to fabricate porous $MoSi_2$ material with electric-resistive heating capability through the control of pore size. The preform for SHS reaction was consisted of molybdenum powder with different sizes and silicon powder with different contained quantity. The size of the $MoSi_2$ particles thus formed was determined by the generated heat of combustion, not by the size of molybdenum powder. However, the pore size of $MoSi_2$ composite was proportional to the particle size of molybdenum powder. that is the coarser the molybdenum powder used, the larget the formed pore size. Based on these results, the porous $MoSi_2$ composite could be fabricated with a desired pore size. By orienting the porous molybdenum disilicide-based material in the form of pore size gradient, porous materials used for filters with improved dirt-holding capacity can be manufactured.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.2
• /
• pp.33-48
• /
• 2021

The rock anchorage of a suspension bridge is an outstanding anchorage type from environmental and economical perspective, although it should be applied when the bearing foundation is fresh enough to resist large cable loads. In practice, geotechnical engineers have encountered difficulties in designing the anchorage structure due to the fact that the physical behaviors of rocks against cable loads have not yet been fully proved and its design method was not established yet. In this study, model tests and numerical studies were performed to evaluate the behavior of the rock anchorage system planned under hard rock layers in domestic islands, and results suggest that the shape of asymmetric rock wedges can resist the tension loads with self weight and shear resistance. Additionally, real scale trial tests were carried out to verify the accuracy of an inclined drilling penetrating hard rock layers to install tendon to the bearing plate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.220-220
• /
• 2021

2020년 장마는 6월 중순부터 8월 중순까지 전국적으로 평균 687 mm의 강수가 내려, 1973년 이후 역대 2위 강수량을 기록하였으며, 연이은 태풍으로 큰 인명 및 재산 피해가 발생하였다. 특히, 섬진강 및 한탄천 등에서 계획홍수위를 초과하는 홍수로 인해 상당수의 제방이 월류로 인해 붕괴된 것으로 나타났다. 따라서, 향후 기후변화에 따른 연평균 강수량이 증가할 것으로 전망되는 가운데 집중호우로 인한 제방 붕괴 피해를 최소화하기 위한 고도화된 기술 개발을 통한 선제적 재발 방지대책이 필요한 시점이다. 한국건설기술연구원은 바이오폴리머라는 새로운 친환경 신소재를 이용하여 제방의 안정성 평가 기술 개발 연구를 수행하고 있다. 이에 안동하천연구센터에서는 실규모에 준하는 제방모형(높이 3 m, 사면경사 1:2, 길이 10 m 이상)을 제작하고, 제방 표면에 바이오폴리머 신소재를 처리하여 전방 월류 흐름 유도에 따른 실규모 제방붕괴실험을 수행하였다. 또한, 신소재 보강 및 무보강 조건에 따른 영상분석 기반 붕괴지연효과를 정량적으로 분석하여 신소재의 성능을 평가하였다. 하지만, 기존에 수행된 실험은 댐 붕괴 흐름과 같이 홍수파가 발생하여 제내지로 퍼져 나가는 형태로 진행되어, 보강공법의 검증에 있어 실제 하천에서 발생하는 횡월류 흐름을 재현하지 못한다는 한계를 가지고 있다. 본 연구에서는 횡월류 흐름(0.6 m³/s 이상)을 발생시켜 수리실험에 따른 축척효과(scale effect)를 최소화하고, 현장에 대한 충분한 자연성을 재현하는 것을 목표로 하여 실험을 수행하였다. 실험 조건은 1) 신소재가 처리된 식생 제방, 2) 신소재가 처리되지 않은 식생 제방으로 각각의 조건에 따른 횡월류 흐름 및 제방 붕괴를 유도하여 영상분석 기법(이미지 픽셀분석 및 3D 포인트 클라우드 모델링)을 통한 침식 저항에 관한 분석결과를 제시하였다.

• Food Science of Animal Resources
• /
• v.25 no.4
• /
• pp.365-372
• /
• 2005

This study was carried out to investigate the Physiochemical Properties of loin and rump in the native horse meat from Jeju. In the analysis of chemical composition of loin and rump, the result showed $72.2\%\;and\;73.8\%$ in moisture content $20.1\%\;and\;21.2\%$ in crude protein, $2.42\%\;and\;3.08\%$ in crude Int and $0.13\%\;and\;0.14\%$ in crude ash respectively. Glutamic acid was 3,275mg/100g and 3,577mg/100g in loin and rump each and it had highest result in amino acid analysis. K content was 388.0mg/100g which showed highest result in mineral analysis and next contents were P>Na>Mg>Ca. Oleic acid had highest result in fatty acid composition which were $62.64\%\;and\;63.77\%$ in loin and rump respectively. Cholesterol content of loin and rump were 43.25 and 43.57 mg/100g but showed no significant differences to the part. pH of loin and rump were 5.60 and 5.75 which had no significant differences. Loin had Higher result than that of rump with no significant differences in WHC and springiness of texture analysis. Redness of rump was higher than that of loin. In the sensory evaluation, there were significant differences in the color and odor. Loin had higher result than that of rump in the overall palatability but showed no significant differences. With the result of this experiment native horse meat from Jeju could be understood as good meat resources.

• The Korean Journal of Petroleum Geology
• /
• v.2 no.2 s.3
• /
• pp.43-50
• /
• 1994

The geologic structure of Gongju Basin, which is a Cretaceous sedimentary basin located on the boundary of Gyeonggi Massif and Ogcheon Belt, is modeled by using gravity data and interpreted in relation with basin forming tectonism. The electrical survey with dipole-dipole array was also conducted to uncover the development of fractures in the two fault zones which form the boundaries of the basin. In the process of gravity data reduction, the terrain correction was performed by using the conic prism model, which showed better results specially for topography having a steep slope. The gravity model of the geologic structure of Gongju basin is obtained by forward modeling based on the surface geology and density inversion. It reveals that the width of the basin at its central part is about $4{\cal}km$ and about $2.5{\cal}km$ at the southern part. The depth of crystalline basement beneath sedimentary rocks of the basin is about $700{\~}400{\cal}m$ below the sea level and it is thinner in the center than in margin. The fault of the southeastern boundary appears more clearly than that of the northwestern boundary, and its fracture zone may extended to the depth of more than $1{\cal}km$. Therefore, it is thought that the tectonic movement along the fault in the southeastern boundary was much stronger. These results coincide with the appearance of broad low resistivity anomaly at the southeastern boundary of the basin in the resistivity section. The fracture zones having low density are also recognized inside the basin from the gravity model. The swelling feature of basement and the fractures in sedimentary rocks of the basin suggest that the compressional tectonic stress had also involved after the deposition of the Cretaceous sediments.

• Journal of Korean Society of Steel Construction
• /
• v.25 no.1
• /
• pp.61-70
• /
• 2013

A turn-buckle is capable of adjusting the tensile force by left-hand threads and right-hand threads between tension members. There are different types of turn-buckles according to tension member and connection form but the practical and existing turn-buckles are incapable of measuring the tensile force. A turn-buckle for adjusting and measuring tensile force has therefore been developed. This study shows the ultimate strength and reliability for measurement of the new turn-buckles through finite element analysis of the developed ones. From analytic results of the new turn-buckles which have the measurement limit loads of 100kN, 200kN and 300kN, the ultimate strength is approximately five times stronger than the measurement limit capacity. Additionally, a review of the new turn-buckle, which has the measurement limit load of over 300kN, shows that there is a tendency for the size of turn-buckle to become larger. So the connection devices were designed and the loading test was conducted from the concept that the parallel connection of turn-buckle with 300kN capacity can measure the tensile force of 600kN. The results of parallel loading test show the sufficient possibility. Furthermore, the mock-up test was constructed to investigate the release of initial load and corrosion when the new turn-buckle is installed at the outdoor and exposed to rain and atmosphere.

• Journal of Korea Water Resources Association
• /
• v.45 no.2
• /
• pp.137-149
• /
• 2012

Field measurements of resistance to flow are analyzed for 739 rivers vegetated with grass (281 channels), shrubs (150 channels) and trees (308 channels). The measured distribution of Manning roughness coefficients ranges from 0.015~0.250 for grass, 0.016~0.250 for shrubs, 0.018~0.310 for trees. Significant trends are obtained between Darcy-Weisbach (or Manning roughness coefficients) and flow discharge, friction slope, and relative submergence. The regression equations for Darcy-Weisbach and Manning roughness coefficients in vegetated rivers are: $f_{veg}=0.436Q^{-0.363}$, $f_{veg}=3.305S_f^{0.508}$, and $n_{veg}=0.061Q^{-0.124}$, $n_{veg}=0.144S_f^{0.199}$, $V=5.3(h/d_{50})^{1/8.3}{\sqrt{ghS_f}}$, $\sqrt{8/f}(=V/u*)=5.75log(5h/d_{50})$, respectively. These semi-empirical relationships should be useful for hydraulic engineering practice.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.6
• /
• pp.317-324
• /
• 2020

In this study, a simplified equation for settlement evaluation suitable for the special conditions of a counter facility is suggested. Recently, counter facilities, especially breakwaters, are constructed on soft ground in distant seas as new-port development projects. A counter facility that resists the external forces by self-weight settles easily when constructed on soft ground. Settlement in a counter facility and breakwater is not an important factor for maintenance than a land facility. On the other hand, the current settlement evaluation criteria are excessive for conducting a safety inspection. A settlement evaluation from a safety inspection followed by "Detailed Guidelines for a safety inspection on a counter facility" is used. A simplified equation was proposed to calculate the maximum settlement by applying the allowable residual settlement or settlement stability evaluation results. The suitability of the simplified equation was assessed compared to the assessed rating from the settlement survey results. The proposed simplified equation showed that the settlement evaluation rating had been upgraded. The proposed simplified equation is expected to be used to evaluate the practical structural stability and functional performance.

• Geophysics and Geophysical Exploration
• /
• v.23 no.4
• /
• pp.230-242
• /
• 2020

We performed a magnetotelluric (MT) survey to delineate the geological structures below the depth of 20 km in the Gyeongju area where an earthquake with a magnitude of 5.8 occurred in September 2016. The measured MT data were severely distorted by electrical noise caused by subways, power lines, factories, houses, and farmlands, and by vehicle noise from passing trains and large trucks. Using machine-learning methods, we classified the MT time series data obtained near the railway and highway into two groups according to the inclusion of traffic noise. We applied three schemes, stochastic gradient descent, support vector machine, and random forest, to the time series data for the highspeed train noise. We formulated three datasets, Hx, Hy, and Hx & Hy, for the time series data of the large truck noise and applied the random forest method to each dataset. To evaluate the effect of removing the traffic noise, we compared the time series data, amplitude spectra, and apparent resistivity curves before and after removing the traffic noise from the time series data. We also examined the frequency range affected by traffic noise and whether artifact noise occurred during the traffic noise removal process as a result of the residual difference.

• The korean journal of orthodontics
• /
• v.32 no.6 s.95
• /
• pp.425-434
• /
• 2002

The purpose of this investigation was to study the spatial changes of the maxillofacial complex following maxillary protraction transmitted to the center of resistance of a dry juvenile human skull by a modified maxillary protraction appliance. Four dry juvenile human skulls (without mandible) with well aligned upper deciduous dentition and early mixed dentition were used as experimental samples. A modified protraction headgear was fabricated from a Delare's facemask, and following an alginate impression, an orthodontic resin maxillary splint was made for each dry skull. Protraction force level was maintained at approximately 1000gm per side for 6 hours. Cephalometric radiographs were taken pre- and post- protraction, and nine reference markers with 1.5 mm length of $.017\times.025$ TMA wire were placed on the right side of the skull for an accurate superimposition of serial cephalometric radiographs. The present investigation demonstrated that vertical changes associated with an anterior displacement of the maxillary complex was observed, and the most prominent effect of protraction headgear was a counterclockwise rotation of the maxilla, that is, a forward and downward tipping around the palatomaxillary region.